Publikationen

Dietz, R. (2024): Netzstützendes Verhalten verteilter Erzeuger im Niederspannungsnetz, Dissertation, TEWISS Verlag ISBN 978-3-95900-913-3

England, M. (2024): Geräusch- und Schwingungsreduktion bei permanentmagneterregten Synchronmaschinen durch neuartige Blechschnitte, Dissertation, TEWISS Verlag ISBN 978-3-95900-917-1

Lin, S. (2024): Design and Optimization of Oil-Cooled Medium-Frequency Transformers with Foil Winding and Toroidal Core for High Power Applications, Dissertation, TEWISS Verlag ISBN 978-3-95900-940-9

Lindemann, G. (2024): Selbst parametrierbare postionsgeberlose Regelung für den Grunddrehzahlbereich einer permanentmagneterregten Synchronmaschine, Dissertation, TEWISS Verlag ISBN 978-3-95900-965-2

Raziee, S. M. (2024): Unconventional Windings for Traction Motors in Electric Vehicles, Dissertation, TEWISS Verlag ISBN: 978-3-95900-938-6 u. Online DOI: 10.15488/17358

Dokus, M. (2023): Analysis of the Interoperability of Power-Electronic-Based Grid Converters, Dissertation, TEWISS Verlag ISBN 978-3-95900-848-8

Gerlach, M. (2023): Einfluss von Wicklung und Isolierung auf das Schwingungsverhalten elektrischer Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-798-6

Herwig, D. (2023): Applying Temperature-Sensitive Electrical Parameters to SiC Power Modules Considering Parasitic Effects, Dissertation, Repositorium der LUH, OnlineRess:/DOI: https://doi.org/10.15488/15128

Hoffmann, A. (2023): Electric Potential Distribution in Three-Phase Windings under Pulse Voltage Stress, Dissertation, TEWISS Verlag ISBN 978-3-95900-852-5

Kaiser, R. (2023): Gegenüberstellung der Materialeinzelkosten und der Verlustenergie im Fahrzyklus von Induktionsmaschinen mittels analytisch-numerisch-gekoppelter Methoden, Dissertation, TEWISS Verlag ISBN 978-3-95900-881-5

Karimi, R. (2023): Design and Control of a Multiphase Interleaving DC-DC Converter with Loss Optimizing Operating Strategies for Electric Vehicles, Dissertation, Repositorium der LUH, OnlineRess:/DOI: https://doi.org/10.15488/15541

Königsberg, J. (2023): Untersuchung eines vollintegrierten Aktorsystems zur Verringerung von Ratterschwingungen, Dissertation, TEWISS Verlag ISBN 978-3-95900-882-2

Sommer, C. (2023): Analysis and Comparison of Single- and Three-Phase Single Active Bridge Converters for Multi-kW Applications, Dissertation, TEWISS Verlag ISBN 978-3-95900-824-2

Fricke, T. (2022): Compression System Losses in Large Salient Pole Synchronous Machines, Dissertation, TEWISS Verlag ISBN 978-3-95900-776-4

Haschen, E. (2022): Transiente Simulation elektrisch erregter Synchronmaschinen mit Parameterfindung durch magnetische Ersatznetzwerke, Dissertation, TEWISS Verlag ISBN 978-3-95900-686-6

Lücke, S. (2022): Regelung von Induktionsmaschinen im gesamten Drezahlbereich ohne Gebersystem, Dissertation, TEWISS Verlag ISBN 978-3-95900-692-7

Movagharnejad, H. (2022): Wireless Power Transfer for Battery Charging Application of Electric Vehicles, Dissertation, TEWISS Verlag ISBN 978-3-95900-716-0

Udema, S. (2022): Elektrisch erregte Synchronmaschine mit kontaktlosem induktivem Übertragungssystem ohne zusätzlichen Wechselrichter, Dissertation, TEWISS Verlag ISBN 978-3-95900-740-5

Andresen, J. (2021): Aktive Geräuschunterdrückung in einer permanentmagneterregten Synchronmaschine mit Hilfe von Stromoberschwingungen, Dissertation, TEWISS Verlag ISBN 978-3-95900-639-2

Buchali, T. (2021): Electric Five-Phase Actuators in Steering Systems for Autonomous Driving, Dissertation, Shaker Verlag ISBN 978-3-8440-8314-9, Mahle Schriftenreihe

Müller, J.-K. (2021): Untersuchungen zu Ausgangsfiltern in Siliziumcarbid-Antriebswechselrichtern, Dissertation, TEWISS Verlag ISBN 978-3-95900-525-8

Quattrone, F. (2021): Elektromagnetische Gestaltung permanentmagneterregter Synchronmaschinen für den geberlos geregelten Betrieb im gesamten Drehzahlbereich, Dissertation, TEWISS Verlag ISBN 978-3-95900-655-2

Rosen, A. (2021): Modellierung und Regelung fehlertoleranter Antriebe mit permanentmagneterregten Synchronmaschinen für Elektrofahrzeuge, Dissertation, TEWISS Verlag ISBN 978-3-95900-571-5

Stockbrügger, J. O. (2021): Analytische Bestimmung parasitärer Kapazitäten in elektrischen Maschinen, Dissertation, Repositorium der LUH, OnlineRess: DOI: https://doi.org/10.15488/11154

Urbanek, S. (2021): Gestaltung von Rotoren permanentmagneterregter Synchronmaschinen für die metalladditive Fertigung, Dissertation, TEWISS Verlag ISBN 978-3-95900-618-7

Vip, S.-A. (2021): Zeiteffiziente Berechnung der Magnetgeräusche drehzahlvariabler elektrischer Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-534-0

Wohlers, C. (2021): Permanenterregte Synchronmaschinen hoher Drehmomentdichte, Dissertation, TEWISS Verlag ISBN 978-3-95900-587-6

Zulk, S. (2021): Optimierung eines einphasigen PFC-Gleichrichters mit Wide-Bandgap-Leistungshalbleitern auf Basis domänenübergreifender Modelle, Dissertation, Repositorium der LUH, OnlineRess: DOI: https://doi.org/10.15488/10513

Boseniuk, F. (2020): Parametrisierung von thermischen Modellen für permanentmagneterregte Synchronmaschinen mittels experimenteller Identifikationsmethoden, Dissertation, TEWISS Verlag ISBN 978-3-95900-425-1

Ebrahimi, A. (2020): Advances in Modelling and control of Wind and Hydrogenerators, ISBN: 978-1-83880-533-3

Heseding, J. (2020): Baukastensysteme für den Antriebsstrang von Elektrofahrzeugen, Dissertation, TEWISS Verlag ISBN 978-3-95900-436-7

Jürgens, J. (2020): Elektrisch erregte Synchronmaschinen für unterschiedliche Antriebskonzepte in Elektrofahrzeugen, Dissertation, TEWISS Verlag ISBN 978-395900-466-4

Morisse, M. (2020): Über System- und Regelungsdynamiken von Windenergieanlagen und deren Einfluss auf die Umrichterlebensdauer, Dissertation, Repositorium der LUH, Online-Ress.: https://www.repo.uni-hannover.de/handle/123456789/9431

Oelkers, F. (2020): Fehlererkennung in Antriebssystemen mit permanentmagneterregten Synchronmaschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-417-9

Rehfeldt, A. (2020): Verbesserte Berechnung von Magnetfeldern und Ummagnetisierungsverlusten in elektrischen Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-519-7

Schroeder, H. (2020): Wicklungskopflose Turbogeneratoren mit Mehrphasentransformatoren, Dissertation, TEWISS Verlag ISBN 978-3-95900-510-4

Hackbart, M. (2019): Berechnung des Einflusses von Dämpferwicklung und massivem Läuferballen auf den Stoßkurzschluss von Turbogeneratoren, Dissertation, Isle Verlag, Ilmenau, ISBN: 978-3-938843-99-4

John, M. (2019): Frequency-Domain Modeling of Harmonic Interactions in Pulse-Width Modulated Voltage-Source Inverter Drives, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4705

Jonsky, T. (2019): Modellierung und Regelung von fünfphasigen Synchronmaschinen unter Berücksichtigung von Sättigungseffekten und Mehrfachanisotropien, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4778

Krone, T. (2019): Beiträge zu fehlertoleranten Fahrzeugantrieben mit Radnabenmotoren ohne Reibungsbremse, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4782

Kucka, J. (2019): Quasi-two-level PWM Operation of Modular Multilevel Converters: Implementation, Analysis and Application to Medium-Voltage Drives, Dissertation, Repositorium der LUH, OnlineRess: https://www.repo.uni-hannover.de/handle/123456789/4870

Bresemann, E.-M. (2018): Das Stirnraumfeld und sein Einfluss auf Schlingströme bei Schenkelpolsynchronmaschinen, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 3
ISBN: ISBN: 978-3-959-00225-7

Brune, A. (2018): Elektrisch erregte Synchronmaschinen als Fahrantriebe, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 4, ISBN: 978-3-959-00241-7

Dörbaum, M. (2018): Gestaltung und Analyse elektromagnetischer Kippaktoren, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1014381304/Gestaltung-und-Analyse-elektromagnetischer-Kippaktoren/

Emmrich, J. (2018): Dimensionierung motorintegrierter elektromagnetischer Aktoren zur Dämpfung von Rotorschwingungen, Dissertation, Papierflieger Verlag
ISBN: 978-3-869-48653-6

Juris, P. (2018): Elektrische Antriebssysteme mit sehr hoher Drehmomentdichte für Elektro- und Hybridflugzeuge, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 2
ISBN: ISBN 978-3-95900-221-9

Merkert, A. (2018): Untersuchungen zum Einsatz von Siliziumcarbid-Leistungshalbleitern in Traktionsantriebsumrichtern, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/datacite%3Adoi~10.15488%252F3258/Untersuchungen-zum-Einsatz-von-Siliziumcarbid-Leistungstransistoren/#documentinfo

Misir, O. (2018): Betriebsverhalten von Synchronmaschinen mit unsymmetrischer Ständerwicklung, Dissertation, Springer Vieweg Verlag, ISBN 978-3-658-21026-7; TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1012120805/Betriebsverhalten-von-Synchronmaschinen-mit-unsymmetrischer/

Müller-Deile, F. (2018): Modulare und skalierbare mehrsträngige Antriebssysteme für Elektrofahrzeuge, Dissertation, VDI-Fortschrittsbericht Nr. 418, Reihe 21, VDI-Verlag
ISBN: 978-3-18-341821-3

Weber, B. (2018): Positionsgeberlose Regelung von permanentmagneterregten Synchronmaschinen bei kleinen Drehzahlen mit überabtastender Stromerfassung, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1016297955/Positionsgeberlose-Regelung-von-permanentmagneterregten/

Weber, J.-N. (2018): Berührungslose Übertrager für elektrisch erregte Synchronmaschinen, Dissertation, Tewiss Verlag, Berichte aus dem IAL, Band 1
ISBN: 978-3-95900-193-9

Weber, S. (2018): Beitrag zur Zustandsüberwachung von IGBT-Modulen mit temperatursensitiven Parametern, Dissertation, TIB Hannover, Online-Ress.: https://www.repo.uni-hannover.de/handle/123456789/3769

Werner, T. (2018): Geberlose Rotorlagebestimmung in elektrischen Maschinen: Spannungsbasierte Verfahren für permanentmagneterregte Synchronmotoren, Dissertation, Springer Vieweg Verlag, ISBN 978-3-658-22270-3

Zhang, M. (2018): Doppelgeneratorsystem für Laufwasserkraftwerke : Untersuchung des dynamischen Verhaltens, der Regelung, des Energieertrags und der Wirtschaftlichkeit, Dissertation, Repositorium der LUH, OnlineRess:: https://www.repo.uni-hannover.de/handle/123456789/3607

Friebe, J.; Führer, O. (2017): Optimierte Aufbau- und Verbindungstechnik für Photovoltaik-Wechselrichter – Teilvorhaben, Hochfrequenz-Kompaktwechselrichter für vollautomatisierte Fertigungsprozesse, Niestetal, Germany, Mai 2017

Fuchs, F. (2017): Converter Control for Wind Turbines when Operating in Weak Grids containing Resonances, Dissertation, TIB Uni-Hannover, , Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1006264949/Converter-control-for-wind-turbines-when-operating/

Jung, M. (2017): Optimiertes multifunktionales bidirektionales Ladegerät für Elektrofahrzeuge, Dissertation, Fraunhofer Verlag, ISBN 978-3-8396-1193-7; TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/fraunhofer%3Aoai%253Afraunhofer.de%253AN-452659/Optimiertes-multifunktionales-bidirektionales-Ladeger%C3%A4t/

Karwatzki, D. (2017): Analyse und Regelung einer Klasse von modularen Multilevelumrichter-Topologien, Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1002749247/Analyse-und-Regelung-einer-Klasse-von-modularen/

Koupený, J. (2017): Online-Parameter-Identifikation von geregelten Antriebssystemen mit Umricherspeisung, Dissertation, Papierflieger Verlag GmbH, ISBN 978-3-86948-575-1; TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A891203702/Online-Parameter-Identifikation-von-geregelten/

Tischmacher, H. (2017): Systemanalysen zur elektrischen Belastung von Wälzlagern bei umrichtergespeisten Elektromotoren, Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A887342701/Systemanalysen-zur-elektrischen-Belastung-von-W%C3%A4lzlagern/

Ebrahimi; A. (2016): Hybrid Analytical Modeling and Optimization of Surface Mounted Permanent Magnetic Synchronous Motors Considering Spatial Harmonics, Dissertation
ISBN: 978-3-8440-5026-4

Junginger, C. (2016): Untersuchung der Stromverdrängung im Ständer hoch ausgenutzter Elektrischer Maschinen, Dissertation, Springer Verlag, AutoUni-Schriftenreihe, ISBN 978-3-658-17006-6;TIB Uni-Hannover Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A879406402/Untersuchung-der-Stromverdr%C3%A4ngung-im-St%C3%A4nder-hoch/

Tegeler, S. (2016): Erweiterung von analytischen Verfahren zur Berechnung von Ummagnetisierungsverlusten in Drehfeldmaschinen, Dissertation, Papierflieger Verlag GmbH, ISBN 978-3-86948-503-4

Braunisch, D. (2015): Kombinierte analytisch-numerische Berechnung der Magnetgeräusche elektrischer Maschinen,  Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A831947675/Kombinierte-analytisch-numerische-Berechnung-der/

Garbe, E. (2015): Beeinflussung des Geräuschs von Induktionsmaschinen durch innovative Ständer- und Läufergeometrien,  Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A842127003/Beeinflussung-des-Ger%C3%A4uschs-von-Induktionsmaschinen/

Bostanci, E. (2014): Performance Analysis of Brushless DC Machines with Axially Displaceable Rotor,  Dissertation, AutoUni-Schriftenreihe, Band 64, Logos Verlag Berlin GmbH

Friebe, J. (2014): Permanentmagnetische Vormagnetisierung von Speicherdrosseln in Stromrichtern,  Dissertation, Universität Kassel, Germany, Juni 2014

Jastrzembski, J.-P. (2014): Synchrone Linear-Direktantriebe für Förderbänder,  Dissertation, VDI-Fortschrittsbericht Nr. 412, Reihe 21, Elektrotechnik, VDI-Verlag

Robert Meyer (2014): Fault-Ride-Through-Regelung von Windenergieanlagen mit Vollumrichter und LCL-Netzfilter,  Dissertation, Leibniz Universität Hannover, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A812759397/Fault-Ride-Through-Regelung-von-Windenergieanlagen/

Baruschka, L. (2013): Untersuchung des modularen Direktumrichters "Hexverter",  Dissertationsschrift, Hannover

Dempewolf, K.-H. (2013): Modellierung des dynamischen Verhaltens permanentmagneterregter Synchronmaschinen,  Dissertation, VDI-Fortschrittsbericht Nr. 407, Reihe 21, Elektrotechnik, VDI-Verlag

Veeh, C. (2013): Oberwellenorientierte Wicklungsmodifikation von permanentmagneterregten Synchronmaschinen mit Zahnspulenwicklung,  Dissertation, VDI-Fortschrittsbericht Nr. 408, Reihe 21, Elektrotechnik, VDI-Verlag

Cornelia Stübig (2012): Effiziente Berechnungsverfahren für Hybridschrittmotoren,  Dissertation, VDI-Fortschrittsbericht Nr. 400, Reihe 21, Elektrotechnik, VDI-Verlag

Rüger, N. (2012): Zur Anwendung eines bandseparierenden Modulationsverfahrens mit niedrigen Taktzahlen in der Leistungselektronik,  Dissertation, VDI-Fortschrittsbericht Nr. 402, Reihe 21, Elektrotechnik, VDI-Verlag

Wiedmann, K. (2012): Positionsgeberloser Betrieb von permanentmagneterregten Synchronmaschinen,  Dissertation

Büttgenbach, S.; Burisch, A.; Hesselbach, J. (Eds.) (2011): Design and Manufacturing of Active Microsystems Series: Microtechnology and MEMS,  Design and Manufacturing of Active Microsystems Series: Microtechnology and MEMS, 1st Edition

Averberg, A. (2009): Gleichspannungswandler für Brennstoffzellensysteme: Analyse, Vergleich und Bewertung unterschiedlicher Konzepte,  Fortschritt-Berichte VDI, Reihe 21, Nr. 389, VDI-Verlag Düsseldorf, 2009

Müller, G.; Ponick, B. (2009): Theorie elektrischer Maschinen 6. Aufl.,,  Wiley-VCH Weinheim

Stölting, H.-D., Kallenbach, E., Amrhein, W. (2008): Handbook of Fractional-Horsepower Drives,  Springer-Verlag

Demmig, S.; Gehrking, R.; Ponick, B.; Mertens, A.; Wiedmann, K. (2007): Positionsregelung eines elektromagnetischen Mikrolinearaktors,  GMM-Fachbericht 54: Innovative Klein- und Mikroantriebstechnik, VDE-Verlag, Berlin und Offenbach, pp. 117-122

Müller, G.; Ponick, B.; Vogt, K. (2007): Berechnung elektrischer Maschinen

Mertens, A. (2006): Innovationen und Trends der Leistungselektronik

Müller, G.; Ponick, B. (2005): Grundlagen elektrischer Maschinen

Stölting, H.-D. (2004): Electromagnetic Actuators,  in: Janocha, H.: Actuators

Jäger, K.; Dittmann, F.; Stölting, H.D. (2003): Alles bewegt sich – Beiträge zur Geschichte elektrischer Antriebe

Schäfer, H.; Altenbernd, G. (2001): Welche elektrischen Maschinen sind aus heutiger Sicht als Starter-Generator für den Serieneinsatz geeignet?

Stölting, H.D.; Kallenbach, E. (2001): Handbuch Elektrische Kleinantriebe

Ponick, B. (1995): Fehlerdiagnose bei Synchronmaschinen

Seinsch, H.O. (1993): Grundlagen elektrischer Maschinen und Antriebe,  Teubner Verlag

Seinsch, H.O. (1992): Oberwellenerscheinungen in Drehfeldmaschinen,  Teubner Verlag

Skudelny, H.-Ch.; Langer, J.-G.; Mertens, A.; Schülting, L. (1992): Resonanzstromrichter mit abschaltbaren Leistungshalbleitern

Skudelny, H.-Ch.; Mertens, A.; Langer, J.-G. (1992): Comparative Study of High Power Devices in Converter Circuits

Seinsch, H.O. (1991): Ausgleichsvorgänge bei elektrischen Antrieben,  Teubner Verlag

De Barros, A.; Ebrahimi, A.; Schwarz, B.; Ponick, B. (2024): Graphical Root Cause Analysis of Magnetically Induced Vibrations in Synchronous Machines, IEEE Transactions on Magnetics, Early Access Article

De Barros, A.; Ebrahimi, A.; Schwarz, B.; Ponick, B. (2024): New Method Based on Shell Elements for Fast Calculation of the Stator Eigenfrequencies and Vibrations in Hydro Generators, IEEE Access, Vol. 12, pp. 105418-105428

De Barros, A.; Gerlach, M.E.; Huang, X.; Langfermann, M.; Ponick, B.; Ebrahimi, A. (2024): Mechanical Calculation of Stator Core Vibration of Rotating Electric Machines Using an Analytical Beam Element Model, IEEE Transactions on Industry Applications, Vol. 60, no.1, pp. 47-56

Raziee, S.M.; Steinbrink, J.; Ponick, B. (2024): Design of Single-Layer Fractional-Slot Distributed Windings, IEEE Transactions on Energy Conversion Vol. 39, no. 1, March 2024, pp.504-515

Raziee, S.M.; Steinbrink, J.; Ponick, B. (2024): Winding Factor Equation for Main Pattern of Single-Layer Fractional-Slot Distributed Windings, IEEE Transactions on Energy Conversion Vol. 39, no. 2, March 2024, pp.988-998

Blanken, N.; Ponick, B. (2023): Preferable PMSM Rotor Geometry for Reduced Axial Flux Components in the Stator Core, e & i Elektrotechnik und Informationstechnik

Dittmann, J.; England, M.; Ponick, B. (2023): Design of Hairpin Windings Considering the Transient Potential Distribution, e & i Elektrotechnik und Informationstechnik, Ausgabe 2/2023

Gerlach, M.E; De Barros, A.; Huang, X.; Langfermann, M.; Ponick, B.; Ebrahimi, A. (2023): The Analytical Beam Element Model: Novel Approach for Fast Calculation of Vibrations in Electric Machines, e & i Elektrotechnik und Informationstechnik, Ausgabe 3/2023

Himker, N.; Mertens, A. (2023): Analytical Design of Self-Sensing Control for PMSM using Quasi-Direct Calculation, IEEE Open Journal of Industry Applications, Volume: 4; pp. 149 - 159

Keuter, R. J; Kirsch, B.; Friedrichs, J.; Ponick, B. (2023): Design Decisions for a Powertrain Combination of Electric Motor and Propeller for an Electric Aircraft, IEEE Access

Keuter, R. J; Niebuhr, F.; Nozinski, M.; Krüger, E.; Kabelac, S.; Ponick, B. (2023): Design of a Direct-Liquid-Cooled Motor and Operation Strategy for the Cooling System, MDPI Energies 2023

Maroldt, N.; Lohse, S.; Seume, J. R.; Kalla, M.; Ponick, B. (2023): Multidisciplinary Design of an Electrically Powered High-Lift System, Journal of Turbomachinery, Online

Schuchard, L.; Bien, M.; Ziaja, K.; Blanken, N.; Göing, J.; Friedrichs, J.; di Mare, F.; Ponick, B.; Mailach, R. (2023): A Study on Quantities Driving Maintenance, Repair and Overhaul for Hybrid-Electric Aeroengines, Journal of Engineering for Gas Turbines and Power

Ebersberger, J.; Fauth, L.; Keuter, R.; Cao, Y.; Freund, Y.; Hanke-Rauschenbach, R.; Ponick, B.; Mertens, A.; Friebe, J. (2022): Power Distribution and Propulsion System for an All-Electric Short-Range Commuter Aircraft-A Case Study, 2022, IEEE Access

Ebersberger, J.; Hagedorn, M.; Lorenz, M.; Mertens, A. (2022): Potentials and Comparison of Inverter Topologies for Future All-Electric Aircraft Propulsion, IEEE Journal of Emerging and Selected Topics in Power Electronics

Fricke, T.; Schwarz, B.; Ponick, B. (2022): Combining Schwarz–Christoffel Mappings and Biot–Savart Law to Calculate the Clamping Plate Field in Large Salient Pole Synchronous Machines, IEEE Transactions on Magnetics

Schneider, V.; Behrendt, C.; Höltje, P.; Cornel, D.; Becker-Dombrowsky, F.; Puchtler, S.; Gutiérrez Guzmán, F.; Ponick, B.; Jacobs, G.; Kirchner, E. (2022): Electrical Bearing Damage, A Problem in the Nano and Macro-Range, Lubricants Aug. 2022, DOI: 10.3390/lubricants10080194

De Barros, A.; Galei, A.; Ebrahimi, A.; Schwarz, B. (2021): Practical Modal Analysis of a Prototyped Hydrogenerator, Vibration 2021, 4

Denkena, B.; Bergmann, B.; Böhse, F.; Königsberg, J.; Ponick, B. (2021): Auf dem Weg zur autonomen Werkzeugmaschine - mechatronische Dämpfungssysteme als Befähiger, antriebstechnik Ausgabe 01-02 Februar 2021, pp. 38-43

Dokus, M.; Mertens, A. (2021): On the Coupling of Power-Related and Inner Inverter Control Loops of Grid-Forming Converter Systems, IEEE Access Jorunal, 10.1109/ACCESS.2021.3053060

Ebrahimi, A. (2021): A Contribution to the Theory of Rotating Electrical Machines, IEEE Access Journal

England, M.; Ponick, B. (2021): Einfluss der Rotorgeometrie auf Schwingungs- und Geräuschemissionen elektrischer Fahrzeugantriebe, e & i Elektrotechnik & Informationstechnik, Band 138, Ausgabe 4

Fricke, T.; Schwarz, B.; Ponick, B. (2021): A Fast Calculation Approach for Pressure Finger Losses in Large Salient-Pole Synchronous Machines, IEEE Transactions on Magnetics, DOI 10.1109/TMAG.2021.3087267

Gerlach, M.; Zajonc, B.; Ponick, B. (2021): Mechanical Stress and Deformation in the Rotors of a High-Speed PMSM and IM, e & i Elektrotechnik und Informationstechnik, 10.1007/s00502-021-00866-5, Band 138, Ausgabe 2, pp. 96-109

Gerlach, M.; Zajonc, B.; Ponick, B. (2021): Methodology to Evaluate the Mechanical Stress in High Speed Electric Machines with Buried Magnets, IEEE Transactions on Industry Applications, Band 57, Ausgabe 4 (4.5.2021), pp. 3643-3653

Himker, N.; Lindemann, G.; Wiedmann, K.; Weber, B.; Mertens, A. (2021): A Family of Adaptive Position Estimators for PMSM Using the Gradient Descent Method, IEEE Journal of Emerging and Selected Topics in Power Electronics

Kostka, B.; Herwig, D.; Hanf, M.; Zorn, C.; Mertens, A. (2021): A Concept for Detection of Humidity Driven Degradation of IGBT Modules, IEEE Transactions on Power Electronics (Early Access)

Nejad, A. R.; Keller, J.; Guo, Y.; Sheng, S.; Polinder, H.; Watson, S.; Dong, J.; Qin, Z.; Ebrahimi, A.; Schelenz, R.; Guzmán, F. G.; Cornel, D.; Golafshan, R.; Jacobs, G.; Blockmans, B.; Bosmans, J.; Pluymers, B.; Carroll, J.; Koukoura, S.; Hart, E.; McDonald, A.; Natarajan, A.; Torsvik, J.; Moghadam, F. K.; Daems, P.-J.; Verstraeten, T.; Peeters, C.; Helsen, J. (2021): Wind turbine drivetrains: state-of-the-art technologies and future development trends, Wind Energy Science

Steffen, J.; Lengsfeld, S.; Jung, M.; Ponick, B.; Herranz Garcia, M.; Spagnolo, A.; Klöpzig, M.; Schleicher, K.; Schäfer, K. (2021): Design of a Medium Voltage Generator with DC-Cascade for High Power Wind Energy Conversion Systems, Energies 2021, 14(11), 3106; https://doi.org/10.3390/en14113106 - 26 May 2021

Stockbrügger, J.O.; Hoffmann, A.; Knebusch, B.; Dittmann, J.; Ponick, B. (2021): Analytische Ermittlung der Leiter-Leiter-Kapazität von Zweischichtwicklungen unter Berücksichtigung des Zwischenschiebers zur Vorausberechnung der Potenzialverteilung in der Ständerwicklung umrichtergespeister elektrischer Maschinen, e & i Elektrotechnik und Informationstechnik, Band 138, Ausgabe 2, pp. 117-124

Denkena, B.; Bergmann, B.; Böhse, M.-F.; Königsberg, J.; Ponick, B. (2020): Leistungspotenzial ausgeschöpft - Neues aktives Dämpfungskonzept für Motorspindeln, mav Oktober 2020, pp. 58-61

John, M.; Mertens, A. (2020): Frequency-Domain Modeling of Harmonic Interactions in Voltage-Source Inverters with Closed-Loop Control, egergies 2020, 13(21), 5823

Kucka, J.; Lin, S.; Friebe, J.; Mertens, A. (2020): Quasi-Two-Level PWM-Operated Modular Multilevel Converter With Nonlinear Branch Inductors, IEEE Transactions on Power Electronics, DOI: 10.1109/TPEL.2020.3042635

Kucka, J.; Mertens, A. (2020): Improved Current Control for a Quasi-Two-Level PWM-Operated Modular Multilevel Converter, IEEE Transactions on Power Electronics, Vol 35 No 7, pp. 6842-6853

Kucka, J.; Mertens, A. (2020): Designing a Passively Damped Quasi-Two-Level-Operated Modular Multilevel Converter for Drive Applications, IEEE Access, vol. 8, pp. 80218-80232

Meiswinkel, M.; Ebrahimi, A.: Wohlers, C.: Neschitsch, T. (2020): Transient Roebel Bar Force Calculation in Large Salient-Pole Synchronous Machines, IEEE Access Journal, vol. 8, 2020, Digital Object Identifier 10.1109/ACCESS.2020.3046789

Pfeiffer, J.; Küster, P.; Schulz, I. E. M.; Friebe, J.; Zacharias, P. (2020): Review of Flux Interaction of Differently Aligned Magnetic Fields in Inductors and Transformers, IEEE Access, DOI: 10.1109/ACCESS.2020.3047156

Schefer, H.; Fauth, L.; Kopp, T.; Mallwitz, R.; Friebe, J.; Kurrat, M. (2020): Discussion on Electric Power Supply Systems for All Electric Aircraft, IEEE Access, vol. 8, pp. 84188 - 84216

Schweigert, D.; Gerlach, M. E.; Hoffmann, A; Morhard, B.; Tripps, A.; Lohner, T.; Otto, M.; Ponick, B.; Stahl K. (2020): On the Impact of Maximum Speed on the Power Density of Electromechanical Powertrains, MDPI Vehicles, vol. 2(2), pp. 365-397

Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the End-Winding Portion of the Winding-to-Rotor Capacitance for the Prediction of Bearing Voltage in Electrical Machines, Electrical Engineering (Archiv für Elektrotechnik), 102(4), pp.2481-2491, DOI: 10.1007/s00202-020-01046-y

Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the Turn-to-Turn Capacitances for the Prediction of Voltage Peaks in a PWM-Fed Motor Winding, Electrical Engineering (Archiv für Elektrotechnik), 102(4), pp. 2381-2388, DOI: 10.1007/s00202-020-01036-0

Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the Slot and the End-Winding Portion of the Winding-to-Rotor Capacitance for the Prediction of Shaft Voltage in Electrical Machines, Energies 2021 (MDPI), Band 14 Ausgabe 174, DOI: 10.3390/en14010174

Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Stirnraumanteils der Wicklung-Stator-Kapazität in elektrischen Maschinen zur Vorausberechnung des hochfrequenten Common-Mode-Stroms, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 203-211, DOI: 10.1007/s00502-020-00803-y

Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Nutschlitzanteils der Stator-Rotor-Kapazität zur Vorausberechnung und Reduzierung von Lagerspannungen in elektrischen Maschinen, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 212-217, DOI: 10.1007/s00502-020-00809-6

Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung der Wicklung-Stator-Kapazität in elektrischen Maschinen zur Vorausberechnung des hochfrequenten Common-Mode-Stroms, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 196-202, DOI: 10.1007/s00502-020-00799-5

Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Nutschlitzanteils der Wicklung-Rotor-Kapazität zur Vorausberechnung von Lagerspannungen in elektrischen Maschinen, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 188-195, DOI: 10.1007/s00502-020-00798-6

De Gennaro, M.; Jürgens, J.; Zanon, A.; Gragger, J.; Schlemmer, E.; Fricassè, A.; Marengo, L.; Ponick, B.; Trancho, E.; Kinder, J.; Cavallini, A.; Mancinelli, P.; Hernandez, M.; Messagie, M. (2019): Designing, Prototyping and Testing of a Ferrite Permanent Magnet Assisted Synchronous Reluctance Machine for Hybrid and Electric Vehicles Applications, Systainable Energy Technologies and Assessments, Vol. 31 (2019), pp. 86 - 101

Denkena, B.; Bergmann, B.; Teige, C.; Böhse, F.; Königsberg, J.; Klemme, H. (2019): Störfaktoren ausgeschlossen, NC-Fertigung Ausgabe 07-08 (2019), pp. 18-21

Denkena, B.; Bergmann, B.; Teige, C.; Ponick, B.; Königsberg, J. (2019): Hybride Spindel für vielfältigen Einsatz - Vorspannungsregelung von Spindeln mit Hilfe von Formgedächtnislegierungen, mav Dezember 2019, pp. 70-73

England, M.; Ponick, B. (2019): Automatisierter Entwurf von Haarnadelwicklungen anhand von tabellarischen Belegungsplänen, e & i - Elektrotechnik & Informationstechnik, Vol. 136 Issue 2 - April 2019, pp. 159 - 167

Kucka, J.; Mertens, A. (2019): Common-Mode Voltage Injection Techniques for Quasi-Two-Level PWM-Operated Modular Multilevel Converters, IEEJ Journal of Industry Applications, Vol. 8, Iss. 2, pp. 287-294

Raziee, S. M.; Misir, O.; Ponick, B. (2019): Multiple Multiphase Combined Star-Polygon Winding Analysis, IEEE Transactions on Industrial Electronics, vol. 66, no. 10, pp. 7468-7479

Sarstedt, M.; Dokus, M.; Gerster, J.; Himker, N.; Hofmann, L.; Lehnhoff, S.; Mertens, A. (2019): Standardized Evaluation of Multi-Level Grid Control Strategies for Future Converter-Dominated Electric Energy Systems, at-Automatisierungstechnik Vol. 67, Issue 11, pp. 936-957 , ,

Henke, M.; Narjes, G.; Hoffmann, J.; Wohlers, C.; Urbanek, S.; Heister, C.; Steinbrink, J.; Canders, W.-R.; Ponick, B. (2018): Challenges and Opportunities of Very Light High-Performance Electric Drives for Aviation ,  MDPI Energies

Jan Karthaus, Markus Balluff, Michael Schröder, Martin Gerlach und Kay Hameyer (2018): Study on the Effects of Stator Segmentation on the Characteristics of an Electrical Vehicle Traction Drive, International Compumag Society, Vol. 25 No.1

John, M.; Mertens, A. (2018): Harmonic Domain Model of an Open-Loop Controlled PWM Converter, Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska (IAPGOS), Vol. 8, No. 2, pp. 25-29

Königsberg, J.; Reiners, J.; Ponick, B. ; Denkena, B.; Bergmann, B. (2018): Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction, International Journal of Automation Technology, Vol. 12, No. 5, pp. 669-677

Markus Balluff, Jan Karthaus, Michael Schröder, Martin Gerlach und Kay Hameyer (2018): Untersuchung der Auswirkungen der Statorsegmentierung auf die Eigenschaften eines elektrischen Kraftfahrzeugtraktionsantriebs, e & i Elektrotechnik und Informationstechnik, Heft 2.2018

Misir, O.; Raziee, S. M.; Spyridonidis, I.; Brand, J.; Bothmann, F.; Dreyer, M.; Ponick, B. (2018): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils, IEEE Transactions on Industry Applications, Vol. 54, No. 5, pp. 4315-4323, Sept.-Oct. 2018

Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J. R.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems ,  MDPI Energies

Raziee, S. M.; Misir, O.; Ponick, B. (2018): Combined Star-Delta Winding Analysis ,  IEEE Transactions on Energy Conversion, vol. 33, no. 1, pp. 383- 394, March 2018

Trancho E.; Ibarra, E.; Arias, A.; Kortabarria, I.; Juergens, J.; Marengo, L.; Fricassé, A.; Gragger, J. (2018): PM-Assisted Synchronous Reluctance Machine Flux Weakening Control for EV and HEV Applications ,  IEEE Transactions on Industrial Electronics Vol.65, No.4 pp. 2986 - 2995

Wohlers, C.; Juris, P., Kabelac, S.; Ponick, B. (2018): Design and Direct Liquid Cooling of Tooth-Coil Windings, Electrical Engineering, Volume 100, Issue 4, pp. 2299–2308

Kanus, M.; Radosavac M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2017): Transferprojekt zum Thema Lineardirektantrieb für konventionelle Fördergurte, f + h fördern und heben, Ausgabe 10/2017, S. 56 - 59,

Kucka, J.; Karwatzki D.; Baruschka, L.; Mertens, A. (2017): Modular Multilevel Converter With Magnetically Coupled Branch Inductors, IEEE Transactions on Power Electronics , vol.32, no.9, pp. 6767-6777

Kucka, J.; Karwatzki, D.; Mertens, A. (2017): Enhancing the Reliability of Modular Multilevel Converters Using Neutral Shift, IEEE Transactions on Power Electronics, Vol. 32, No. 12, pp. 8953-8957

Misir, O.; Ponick, B. (2017): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering, Archiv für Elektrotechnik, Vol. 99, Issue 2, pp. 615-624

Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R.; Ponick, B. (2017): Prediction of Losses and Efficiency for Three-Phase Induction Machines Equipped with Combined Star-Delta Windings, IEEE Transactions on Industry Applications, Vol. 53, No. 4, pp. 3579 - 3587, July-Aug.

Raziee, S. M.; Misir, O; Ponick, B. (2017): Winding Function Approach for Winding Analysis, IEEE Transactions on Magnetics, Vol. 53, No. 10, October

Krone, T.; Xu, C.; Mertens, A. (2016): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Transactions on Industry Applications, DOI: 10.1109/TIA.2016.2618785

Mertens, A.; Kucka, J. (2016): Quasi Two-Level PWM Operation of an MMC Phase Leg With Reduced Module Capacitance,  Power Electronics, IEEE Transactions on , vol.21, no.10, pp.6765-6769

Misir, O.; Ponick, B. (2016): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering – Archiv für Elektrotechnik, Volume 98, Issue 4

Misir, O.; Dobbert, F.; Ponick, B. (2016): Analytical Method for the Air Gap Permeance Calculation of Salient Pole Synchronous Machines,  e & i Elektrotechnik und Informationstechnik, Volume 133, Issue 2, pp. 103-111

Misir, O.; Raziee, S. M.; Ponick, B. (2016): Determination of the Inductances of Salient Pole Synchronous Machines Based on the Voltage Equation of a Single Coil in the Stator Winding, IEEE Transactions on Industry Applications, Volume 52, No. 5, pp. 3792-3804

Quattrone, F.; Ponick, B. (2016): Maschinendesign für geberlos geregelte PMSM, e & i Elektrotechnik und Informationstechnik

Misir, O.; Dobbert, F.; Ponick, B. (2015): Analytisch-numerische Berechnung des magnetischen Luftspaltleitwerts für den Läufer einer Schenkelpolsynchronmaschine,  e & i Elektrotechnik und Informationstechnik, Volume 132, Issue 1, pp. 33-38

Mustafa, R.; Küçükay, F.; Boseniuk, F.; Ponick, B.; Tang, T.; Köhler, J.; Ullrich, B.; Mertens, A. (2015): Innovative Electric Vehicle Modelling for Energy Management Applications,  International Journal of Vehicle Design, vol. 68, no. 4, pp. 265-284

S.H. Teichel, M. Dörbaum, O. Misir, A. Merkert, A. Mertens, J.R. Seume, B. Ponick (2015): Design considerations for the components of electrically powered active high-lift systems in civil aircraft,  CEAS Aeronautical Journal, Volume 6, Number 1, pp. 49-67

A. Merkert, T. Krone, A. Mertens (2014): Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices,  Power Electronics, IEEE Transactions on , vol.29, no.5, pp.2238,2245

Bostanci, E.; Neuschl, Z.; Plikat, R.; Ponick, B. (2014): No-Load Performance Analysis of Brushless DC Machines With Axially Displaceable Rotor,  Industrial Electronics, IEEE Transactions on, vol. 61, Issue 4, pp. 1692-1699

Ebrahimi, A. (2014): Auslegung eines EC-Motors für aktiv angetriebene Knieprothesen,  (Fachzeitschrift Orthopädie-Technik) 2014

Friebe, J.; Zacharias, P. (2014): Review of Magnetic Material Degradation Characteristics for the Design of Premagnetized Inductors,  IEEE Transactions on Magnetics, Vol. 50, No. 3, March 2014

Jürgens, J.; Brune, A.; Ponick, B. (2014): Weg von teuren Permanentmagneten,  Zeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (ZfAW), Heft 4/2014, pp. 49-55

M. Blank, M. Calabria, R. Dietz, F. Fuchs, T. Klingenberg, S. Lehnhoff, A. Mertens, W. Schumacher (2014): Agentenbasierte Vorhaltung und Erbringung von Primärregelleistung,  Automatisierungstechnik 2014, vol. 62, no. 5, pp. 347-363

R. Meyer, A. Zlotnik, A. Mertens (2014): Fault Ride-Through Control of Medium-Voltage Converters With LCL Filter in Distributed Generation Systems,  IEEE Transactions on Industry Applications, vol. 50, no. 5, 2014, pp. 3448-3456

Baruschka, L.; Mertens, A. (2013): A New Three-Phase AC/AC Modular Multilevel Converter With Six Branches in Hexagonal Configuration ,  IEEE Transactions on Industry Applications, Vol. 49

Braunisch, D.; Ponick, B; Bramerdorfer, G. (2013): Combined Analytical-Numerical Noise Calculation of Electrical Machines Considering Nonsinusoidal Mode Shapes,  IEEE Transactions on Magnetics, Vol. 49 , Issue 4, pp. 1407 - 1415

Dang L.; Kuhn H.; Mertens, A. (2013): Digital Adaptive Driving Strategies for High-Voltage IGBTs,  IEEE Transactions on Industry Applications, Volume 49, Nr. 4

Kampen, D.; Quattrone, F.; Ponick, B. (2013): Frequenzumrichterbedingte Lagerströme: was wirklich hilft,  Antriebstechnik 09/2013

Ponick, B.; Dück, P. (2013): Energieverbrauch von elektrischen Antrieben optimieren – Schnelle, vollständig automatisierbare Simulationsrechnungen, ti Technologie Informationen, 01/2013, p. 10

A. Mertens, F. Fuchs, L. Baruschka (2012): Wandler im Meerespuls,  Erneuerbare Energien, 07/2012

B. Denkena, W. Bickel, J. Emmrich, B. Ponick (2012): Entwurf eines innovativen Spindelmotors zur Erhöhung der Prozessstabilität von Frässpindeln,  Zeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2012, Seite 518-521, Carl Hanser Verlag

Ganesan, V., Wiedmann, K., Janssen, G., Ponick, B., Mertens, A. (2012): Development of Drive Systems Based on Electromagnetic Microactuators,  Industrial Electronics, IEEE Transactions on , vol.59, no.3, pp.1409-1417, March 2012

Stübig, C.; Ponick, B. (2012): Comparison of Calculation Methods for Hybrid Stepping Motors,  Industry Applications, IEEE Transactions on , vol.48, no.6, pp.2182,2189

A. Kampker, T. Vogels, C. Nowacki, Rainer Schmidt, M. Harding, Dirk Uwe Sauer, Madeleine Ecker, B. Ponick, A. Brune, Axel Mertens, B. Ullrich (2011): E-Antrieb.Net: Development- and production environment for electric drive trains in a SME focused network (Megatrend: electro mobility),  1. WGPJahreskongress, Berlin

B. Denkena, W. Bickel, B. Ponick und J. Emmrich (2011): Dynamic analysis of a motor-integrated method for a higher milling stability,  Productionn Engineering, Volume 5, Number 6, pp. 691-699

Ponick, B. (2011): Miniaturisation of electrical machines,  COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30 Iss: 4, pp.1139 - 1147

Ponick, B. (2010): Energieeffizienz - Welche Technologien bringen wirklich etwas?,  eta [energie] | Datei |

Raziee, S. M.; Meshgin Kelk, H.; Reza-Alikhani, H.-R.; Omati, A. (2010): Air-Gap Eccentricity Effects on Harmonic Contents of Field Current in Synchronous Generators,  International Review of Electrical Engineering, vol. 5. n. 1, pp. 83-89

S.Tegeler; F. Quattrone; B. Ponick (2010): Windgeneratoren effizient berechnen - Kopplung analytischer und numerischer Berechnungsverfahren für doppelt gespeiste Asynchrongeneratoren.,  Antriebstechnik 11/2010

Hansen, S.; Janssen, G.; Ganesan, V.A.; Ponick, B.; Mertens, A.; Gatzen, H.H. (2009): Linearer skalierbarer Mikro-Reluktanzschrittmotor, 4. Kolloquium Mikroproduktion,  BIAS Verlag Bremen

Helmer, R.; Garbe, E.; Steinbrink, J.; Ponick, B. (2009): Combined analytical-numerical calculation of electrical machines,,  Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic

Laczynski,T.; Mertens,A. (2009): Predictive Stator Current Control for Medium Voltage Drives With LC Filters,  IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 24, NO. 11, NOVEMBER 2009, pages (2427-2435)

Wiedmann, K.; Mertens, A. (2009): Analysis and comparison of sensorless control methods for permanent magnet machine drives at low speed,,  Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic

Demmig, S.; Gehrking, R.; Hahn, M.; Wiedmann, K.; Ponick, B.; Gatzen, H.-H.; Mertens, A. (2008): Technical progress in designing and controlling of active microsystems,  , Volume 14, Number 12, November 2008, Springer Berlin / Heidelberg

Ebrahimi, A.; Sandidzadeh, M. (2008): Fuzzy Logic control of regenerative braking in DC Electrical Railway,  ICASTOR journal of Engineering vol.2, No.1, 2008

Brune, K; Seinsch, H.O. (2006): Performance of three-phase motors after disconnecting damaged coils,  Electrical Engineering, vol. 89, no. 4, pp. 271-283

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design improvements for a linear hybrid step micro-actuator

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2002): Linear Microactuator with Enhanced Design

Edler, J.; Stölting, H.-D.; Föhse, M.; Gatzen, H.H. (2002): A linear microactuator with enhanced design

de Wit, B.; Kleiner, F.; Ponick, B. (2001): Choosing Electric Turbocompressor Drivers

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2001): Elektromagnetischer Mikrolinearantrieb

Jacob, A. (2001): Magnetischer Leitwert zweiseitig genuteter Anordnung

Jacob, A.; Seinsch, H.O. (2001): Einfluß magnetischer Nutenverschlusskeile auf den magnetisch wirksamen Luftspalt und die Nutstreuung

Ponick, B. (2001): Pendelmomentanregungen bei Asynchronmaschinen mit Schleifringläufer

Hausberg, V.; Seinsch, H.O. (2000): Kapazitive Lagerspannungen und -ströme bei umrichtergespeisten Induktionsmaschinen,  Electrical Engineering, vol. 82, pp. 153-162

Kleen, S.; Ehrfeld, W.; Michel, F.; Nienhaus, M.; Stölting, H.-D. (2000): Ultraflache Motoren im Pfennigformat

Ponick, B. (2000): Einfluß der Nutschrägung auf die axiale Verteilung des Luftspaltfelds elektischer Maschinen

Eckardt, R.; Ponick, B. (1999): Förderhilfe – Kompressoren mit magnetgelagerten Motoren unterstützen Erdgasförderung (deutsche Ausgabe) Smart Compression – Compressors with magnetic-bearing motors are used to pump natural gas (englische Ausgabe)

Mertens, A.; Eckardt, D. (1998): Voltage and Current Sensing in Power Electronic Converters using Sigma-Delta A/D Conversion

Ponick, B. (1998): Das Luftspaltmoment elektrischer Maschinen unter Berücksichtigung parametrischer Effekte

Ponick, B. (1997): Meßspulen zur Analyse des Luftspaltfelds elektrischer Maschinen

Mertens, A. (1994): Performance Analysis of Three-Phase Inverters Controlled by Synchronous Delta-Modulation Systems

Mertens, A.; Skudelny, H.-Ch.; Caldeira, P.P.A.; Lipo, T. (1994): Characterization of GTO's under different Modes of Zero Current Switching

Ponick, B. (1993): Über den Einfluß der Hauptfeldsättigung auf Ausgleichsvorgänge bei elektrischen Antrieben und eine einfache Methode zu ihrer Berücksichtigung

Mertens, A. (1992): Harmonic Distortion in Three-Phase Inverters Controlled by Synchronous Sigma-Delta-Modulation

Mertens, A. (1992): Analyse des Oberschwingungsverhaltens von taktsynchronen Delta- Modulationsverfahren zur Steuerung von Pulsstromrichtern bei hoher Taktzahl (Dissertationsschrift)

Mertens, A.; Skudelny, H.-Ch. (1991): Switching Losses in a GTO Inverter for Induction Heating

Beckemeier, C.; Mertens, A. (2024): Comparison of Input Voltages of Series Resonant Converters for Isolated Auxiliary Power Supply, Speedam, Ischia, 19. - 21. Juni 2024

Behrendt, C.; Dittmann, J.; Ponick, B. (2024): Optimization of Hairpin Winding Schemes with Respect to the Common-Mode Current, Speedam, Ischia, 19. - 21. Juni 2024

Cao, Y.; Lyu, H.; Mertens, A. (2024): Mission Profile-based Operation Strategies to Improve the Reliability of an ANPC Inverter in Future Electrified Aircraft Propulsion Systems, IEEE Transportation Electrification Conference and Expo (ITEC 2024), Chicago, USA, 19-21. Juni 2024

De Barros, A.; Ebrahimi, A.; Schwarz, B.; Ponick, Bernd (2024): Graphical Root Cause Analysis of Magnetically Induced Vibrations in Synchronous Machines, INTERMAG, Rio de Janeiro, 05.-10.Mai 2024

Fauth, L.; Beckemeier, C.; Goller, M.; Lutz, J.; Basler T. ; Friebe J. (2024): Neutron Radiation-Induced Failure Rate of 650 V lateral GaN Power Devices, WiPDA Europe 16.-18. September 2024

Himker, N.; Fehse, M.; Mertens, A. (2024): Reducing the Effect of Iron Losses on the Quality of Self-Sensing Control Based on Current Oversampling, Speedam, Ischia, 19. - 21. Juni 2024

Kienast, J.; Bernet, S.; Sturm, G.; Hoffmann, A.; Zhu, X.; Ponick, B. (2024): Contributing significant Short Circuit Current with Modular Multilevel Matrix Converters in Flywheel Energy Storage Systems, Speedam, Ischia, 19. - 21. Juni 2024

Lauman, J. N.; Lorenz, M.; Mertens, A. (2024): Advanced Control Method for Quasi-Three-Level Operation of a Conventional Converter extended by a Modular Multilevel Branch, Speedam, Ischia, 19. - 21. Juni 2024

Lorenz, M.; Mertens, A. (2024): Predictive Branch Energy Controller for a Hybrid Modular Multilevel Converter in Quasi-Three-Level Operation, Speedam, Ischia, 19. - 21. Juni 2024

Manthey, T.; Graue, J.; Kühne, P.; Friebe, J. (2024): Yield and Hot-Spot Analysis for Replacing Bypass Diodes with PV Module-Integrated Microinverters, Speedam, Ischia, 19. - 21. Juni 2024

Schepe, C.; Ponick, B. (2024): Rotor Design Measures to Lower an Induction Machine’s Saturation-Dependent Anisotropy as a Prerequisite for Self-Sensing Control, Speedam, Ischia, 19. - 21. Juni 2024

Schubert, M; Ponick, B. (2024): Reduction of Eddy Current Losses in Additively Manufactured Synchronous Reluctance Rotors, Speedam, Ischia, 19. - 21. Juni 2024

Shheibar, M.; Dittmann, J.; Ponick, B. (2024): Transient Overvoltage Prediction of an Inverter-Fed Electric Machine, Speedam, Ischia, 19. - 21. Juni 2024

Strunk, R.; Sourkounis, P.; Mertens, A. (2024): Impedance-Based Stability Analysis of Grid-Forming Inverters with Virtual Impedance or Angle Droop for Improved Robustness, PEDG, Luxembourg, 24. - 26. Juni 2024

Willich, V.; Hullmann, M.; Nelles, R.; Hubert, T.; Mertens, A.; Ponick, B. (2024): Impact of Interleaved Inverter Operation on the Machine Losses of Dual Three-Phase Synchronous Machines, Speedam, Ischia, 19. - 21. Juni 2024

Behrendt, C.; Dittmann, J.; Ponick, B. (2023): Sensitivity of the Common-Mode Characteristics of a Stator Winding Regarding the Assumed Hairpin Position in a Slot, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society

Blanken, N.; Boe,V.; Ponick,B. (2023): Rapid Electromagnetic Scaling Methodology for the Electric Propulsion of a Hybrid-Electric Aircraft, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023

Brinker, T.; Hoffmann, L.; Friebe, J. (2023): Non-Coupled Inductors for Dual-Buck and Differential-Buck Single-Phase Inverters, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2078-2085

Cao, Y.; Fauth, L.; Keuter, R.; Sanwongwanich, A.; Novak, M:, Blaabjerg, F.; Ponick, B.; Mertens, A.; (2023): Inverter Design for Future Electrified Aircraft Propulsion Systems under Consideration of Wear-Out Failure and Random Failure, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 

De Barros, A.; Ridder, A.; Ebrahimi, A.; Schwarz, B. (2023): Estimation of the Damper Winding Pole-to-Pole Impedance in Hydro Generators, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023

Dittmann, J.; Ponick, B. (2023): Comparison of the Measured and Simulated Potential Distributions in an Inverter-Fed Hairpin Stator Winding, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society

Ebersberger, J.; Keuter, R.J.; Ponick, B.; Mertens, A. (2023): Power Distribution and Propulsion System for an All-Electric Regional Aircraft, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023

Fauth, L.; Ebersberger, J.; Cao, Y.; Friebe, J. (2023): Advantages of a Variable Board Supply Voltage in All-Electric Aircraft With Regard to Cosmic Radiation Induced Failures, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023

Fauth, L.; Friebe, J. (2023): Overview on the Effects of Mission Profiles on Radiation Induced Failures in All-Electric Aircraft, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023

Fröhling, S.; Kostka, B.; Wenzel, J. C.; Fischer, K.; Peters, J. H.; Hanf, M.; ... & Mertens, A. (2023): Verification of Hygrothermal Simulations Using Silicone Encapsulated Climate Sensors in Continuously Operated IGBT Power Modules, ICPE ECCE Asia 2023, Jeju, 22.-25. May

Hagedorn, M.; Rettner, C.; Korn, M.; Mertens, A. (2023): Comparison of Modeling Methods for Inverter and Battery Loss Calculations in EV Traction Drives, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society

Heide, D.; Ponick, B. (2023): Acoustic Noise Analysis of an External Rotor Ferrite Permanent Magnet Airborne Wind Generator, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023

Henkenjohann, J.; Zhang, D.; Mertens, A. (2023): Compensation of Radial and Tangential Mode 0 Vibration of a Dual Three-Phase Synchronous Machine by Injecting a Leakage Flux, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society

Himker, N.; Lindemann, G.; Mertens, A. (2023): Comparison of Different Compensation Methods of the Mutual Inductance for Self-Sensing Control, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023

Himker, N.; Mertens, A. (2023): Using the Flux Increment over a Pulse-Width Modulation Period for Anisotropy-Based Self-Sensing Control, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 

Hoffmann, L.; Brinker, T.; Friebe, J. (2023): Power Loss Analysis of a Single-Phase Differential Buck Inverter with Power Decoupling Utilizing Energy Stored in Output Capacitors, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2163-2168

Höltje, P.; Jünemann, L.; Knebusch, B.; Euler-Rolle, N.; Zeiler, A.; Mertens, A.; Ponick, B. (2023): Prediction and Measurement of Bearing Currents in an Electric Traction Drive System, International Conference on Power Electronics (ICPE 2023-ECCE Asia), Jeju, Korea, 22-25.Mai 2023

Hullmann, M.; Krotsch, J.; Ponick, B. (2023): Eddy Current Losses in Permanent Magnets of Inverter-Driven Synchronous Machines, VDE Antriebssysteme 2023

Hullmann, M.; Ponick, B. (2023): Calculation of Eddy Current Loss in Permanent Magnets of a Linear Hybrid Stepper Motor for a Conveyor System, 2023 14th International Symposium on Linear Drivers for Industry Applications (LDIA)

Keuter, R.J.; Melo, S. P.; Jois, P. K.; Cerdas, F.; Hermann, C. ; Ponick, B. (2023): Investigation of Electric Motors For All-Electric Aircraft with Different Material Combinations from an Environmental Perspective, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023

Krüger, E. C.; Kalla, M.; Ponick, B. (2023): Transient Model for Synchronous Machines with Respect to Saturation of Ferromagnetic Materials, IEEE International Electric Machines & Drives Conference (IEMDC)

Lorenz, M.; Laumann, J.; Mertens, A. (2023): Adding a Modular Multilevel Branch to a Conventional Converter to Enable the Quasi-Three-Level Operation Mode, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society

Lorenz, M.; Mertens, A. (2023): Experimental Validation of the Quasi-Three-Level Operation Mode for a Hybrid Modular Multilevel Converter with Series-Connected Clamping Switches, ICPE ECCE Asia 2023, Jeju, 22.-25. May

Manthey, T.; Brinker, T.; Friebe, J. (2023): System Optimized Electronic Design for Photovoltaic Module Integrated Micro-Inverters, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2475-2480

Mirzadeh, M.; Mertens, A. (2023): A Decentralized Coordination of Inverter-Based Generation Units for a Bottom-up Black Start without Communication, ICPE ECCE Asia 2023, Jeju, 22.-25. May

Mirzadeh, M.; Mertens, A. (2023): Inverter-based Tone Burst Signals for Decentralized Communication-less Blackout Detection, 2023 International Conference on Energy Technologies for Future Grids (ETFG 2023), Wollongong, Australia, 3.-6. Dec. 2023

Mirzadeh, M.; Strunk, R.; Mertens, A. (2023): Parameterization of a Decentralized Bottom-up Black Start Sequence in Inverter-Dominated Grids, IEEE Workshop on the Electronic Grid (eGRID), Karlsruhe, 16.-19.Oct 2023

Ridder, A.; De Barros, A.; Emmrich D.; Ebrahimi, A.; Schwarz, B. (2023): Effect of the Damper Winding Pole-to-Pole Connection on the Subtransient Reactance and Steady-State Damper Current in Hydro Generators, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023

Schepe, C.; Ponick, B. (2023): Evaluation of an Induction Machine’s Differential High Frequency Inductance for Self-Sensing Control Considering Iron Saturation, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023

Schuchard, L.; Bien, M.; Ziaja, K.; Blanken, N.; Göing, J.; Friedrichs, J.; di Mare, F.; Ponick, B.; Mailach, R. (2023): A Study on Quantities Driving Maintenance, Repair and Overhaul for Hybrid-Electric Aeroengines, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, Boston, MA, 2023

Strunk, R.; Mertens, A. (2023): Impedance-Based Stability Analysis of Droop-Controlled AC Microgrids with the Generalized Nyquist Criterion, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 

Strunk, R.; Reus, L.; Hofmann, L.; Mertens, A. (2023): Fixed-Frequency Operation of an Island Grid with Multiple Grid-Forming Inverters and GPS-Based Synchronisation, 7th International Hybrid Power Plants & Systems Workshop (HYB 2023), pp. 30 – 36

Wiesemann, J.; Friebe, J.; Mertens, A. (2023): Comparison of Wide Bandgap Semiconductors for Electric Vehicle Drivetrains, E-MOTIVE by FVA, Schweinfurt, Deutschland, 2023

Willich, V.; Mertens, A. (2023): Self-Sensing Control of a PMSM used for an Automotive Application with a novel Rotor Position Estimator based on the Back-Electromotive Force, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023

Zhu, X.; Ponick, B. (2023): Hybrid Analytical-Numerical Calculation of Equivalent Circuit Parameters and Steady-State Performance of DFIG, 2023 26th International Conference on Electrical Machines and Systems (ICEMS), Zhuhai, China, 2023, pp. 903-910

Zorn, C.; Peters, J. H.; Hanf, M., Adler; J., Holzke; W., Pelka, K.; Broer, C.; Fröhling, S.; Kostka B.; Wenzel, J. C.; Mertens, A.; Dehning, K.; Zimmermann, S.; Fischer, K.; Kaminski, N. (2023): Field-Data based Lab Testing of a Wind-Energy Power Converter System: Insights into Cabinet and IGBT-Module Microclimates, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 

Ali, M.; Bushra, R.; Friebe, J.; Mertens, A. (2022): Improvement of EMI Filter Attenuation Using Shielding, EPE 2022, Hannover, Germany, 05.-09.09.2022

Ali, M.; Bushra, R.; Friebe, J.; Mertens, A. (2022): Design and Potential of EMI CM Chokes with Integrated DM Inductance, EPE 2022, Hannover, Germany, 05.-09.09.2022

Ali, M.; Bushra, R.; Magdowski, M.; Vick, R.; Friebe, J.; Mertens, A. (2022): Prediction of Stray Capacitance of CM Chokes and its Influence on EMI Filters, PCIM 2022, Nürnberg, Germany, 10.-12.05.2022

Ali, M.; Friebe, J.; Mertens, A. (2022): Design and Comparison of Output Filter Configurations for SiC-MOSFET-Based Automotive DC-AC Inverters, ECCE 2020, Detroit, Michigan, USA, 09.-13.10.2022

Apte, P.; Fräger, L.; Friebe, J. (2022): Configurable ISOP-IPOP DC-DC Converter for Universal Solid-State Transformer, EPE 2022, Hannover, Germany, 05.-09.09.2022

Araújo Gomes, L. V.; Manthey, T.; Friebe, J. (2022): Investigation of an Interleaved Current-Fed Single Active Bridge DC-DC Converter for PV Applications, EPE 2022, Hannover, Germany, 05.-09.09.2022

Bagaber, B.; Heide, D.; Ponick, B.; Mertens, A. (2022): Efficiency and Lifetime Analysis of Several Airborne Wind Energy Electrical Drive Concepts, EPE 2022, Hannover, Germany, 05.-09.09.2022

Bagaber, B.; Mertens, A. (2022): Energy Storage Systems for Airborne Wind Generators, EPE 2022, Hannover, Germany, 05.-09.09.2022

Beckemeier, C.; Friebe, J. (2022): Novel Current Balancing Method for HF Interleaved Converters with Reduced Control Effort, EPE 2022, Hannover, Germany, 05.-09.09.2022

Behrendt, C.; Dittmann, J.; Knebusch, B.; Ponick, B. (2022): Common-Mode Impedance Prediction of a High-Frequency Hairpin Stator Winding Based on FEM and Modified Nodal Analysis, SPEEDAM 2022, Sorrento, Italy, 22.-24.06.2022

Behrendt, C.; Dittmann, J.; Knebusch, B.; Ponick, B. (2022): An Investigation Into the Trade-Off Between Full Machine and Single-Slot FEM Simulations for Electrical Machine Modeling at High Frequencies With Respect to Inter-Wire Couplings, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Bezerra, V. F.; Manthey, T.; Friebe, J. (2022): Design of Planar Coupled Inductor Applied to Zero Current Switching Clamped-Current Converter, EPE 2022, Hannover, Germany, 05.-09.09.2022

Bien, M.; Göing, J.; Friedrichs, J.; Ziaja, K.; Mare, F.; Blanken, N.; Cao, Y.; Mertens, A.; Ponick, B.; Schuchard, L.; Voigt, M.; Mailach, R.; (2022): Modelling Degradation Mechanisms in Hybrid-Electric Aircraft Propulsion Systems, ISABE 2022, Ottawa, Canada, 25-30.09.2022

Blanken, N; Bieber, M.; Ponick, B. (2022): Design of Axial End Region of Additively Manufactured Rotors of Synchronous Machines to Reduce the Axial Magnetic Stator Flux Density, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Brinker, T.; Gräber, H.; Friebe, J. (2022): GaN HEMT and SiC Diode Commutation Cell based Dual-Buck Single-Phase Inverter with Premagnetized Inductors and Negative Gate Driver Turn-off Voltage, EPE 2022, Hannover, Germany, 05.-09.09.2022

Brinker, T.; Mand, P.; Friebe, J. (2022): Impact of GaN-HEMT Combinations with Different Die-Size on the Efficiency of a Single-Phase Photovoltaic Differential Buck Inverter, ECCE USA 2022, Detroit, USA, 09.-13.10.2022

Cao, Y.; Fauth, L.; Friebe, J.; Mertens, A. (2022): Potentials to Improve the Post-Fault Performance of a Fault-Tolerant Inverter System in Electrified Aircraft Propulsion System, EPE 2022, Hannover, Germany, 05.-09.09.2022

De Barros, A.; Gerlach, M.E.; Huang, X.; Langfermann, M.; Ponick, B.; Ebrahimi, A. (2022): Calculation of Electric Machines Vibration Using an Analytical Beam Element Model, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Dierks, R.; Mertens, A. (2022): Novel Operation Mode of the Modular Multilevel Matrix Converter based on a Dimensioning Algorithm, EPE 2022, Hannover, Germany, 05.-09.09.2022

Dittmann, J.; Behrendt, C.; Ponick, B. (2022): Prediction of the Voltage Distribution in a Inverter-Fed Hairpin Stator Winding, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022

England, M.; Helmer, R.; Ponick, B. (2022): Reduction of Torque Ripple and Vibration of Permanent Magnet Synchronous Machines with Sinusoidal Cavities, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022

Fauth, L.; Willer, F.; Friebe, J. (2022): A Compact Solid State Transformer for Replacing Conventional Medium Power Transformer in Weight-Critical Applications, EPE 2022, Hannover, Germany, 05.-09.09.2022

Fricke, T.; Pickert, P.; Schwarz, B.; Ponick, B. (2022): Combining Schwarz-Christoffel Mappings and Biot-Savart Law to Calculate the High-Frequency Current Distribution Inside a Single Slot, EPE 2022, Hannover, Germany, 05.-09.09.2022

Gerlach, M.E.; Bender, T.; Ponick, B. (2022): Influence of Round Wire Winding and Insulation on the Vibration Behavior of Electric Machines, SPEEDAM 2022, Sorrento, Italy, 22.-24.06.2022

Gerlach, M.E.; Hoffmann, A.; Ponick, B. (2022): Design of High Speed Electric Machine for an Automotive Powertrain, E-MOTIVE Expert Forum 21.-22.09.2022, Wolfsburg

Gerlach, M.E.; Langfermann M.; Ponick, B. (2022): Influence of Conecentrated Winding and Insulation on the Vibration Behavior of Electric Machines, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022

Gerlach, M.E.; Weber S.; Ponick, B. (2022): Influence of Hairpin Winding and Insulation on the Vibration Behavior of Electric Machines, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Hagedorn, M.; Lorenz, M.; Mertens, A. (2022): Cascaded H-Bridge Converter Designs for Future Short-Range All-Electric Aircraft Propulsion, EPE 2022, Hannover, Germany, 05.-09.09.2022

Henkenjohann, J.; Andresen, J.; Mertens, A. (2022): Comparison of Magnetic Noise Compensation Techniques for Dual Three-Phase Electrically Excited Synchronous Machines, EPE 2022, Hannover, Germany, 05.-09.09.2022

Himker, N.; Krümpelmann, M.; Mertens, A. (2022): Low Phase Shift Filter for Current Sensing based on the Difference between AC Machine Models with and without Iron Losses, EPE 2022, Hannover, Germany, 05.-09.09.2022

Hoffmann, L.; Brinker, T.; Teichert, T.; Zimmermann, L.; Hanemann, M.; Manthey, T.; Friebe, J. (2022): Design of a PV-Micro Inverter with Universal Three-Phase and Single-Phase Output Configurations, IEEE PESS & PELSS 2022, Kassel, Germany, 02.-04.11.2022

Hullmann, M.; Ponick, B. (2022): General Analytical Description of the Effects of Segmentation on Eddy Current Losses in Rectangular Magnets, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Kalla, M.; Ponick, B. (2022): Validation of a Transient Model for Induction Machines Considering Saturation and Current Displacement using Transient FEM, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022

Knebusch, B.; Jünemann, L.; Höltje, P.; Mertens, A.; Ponick, B. (2022): Measurement Principle for Measuring High Frequency Bearing Currents in Electric Machines and Drive Systems, EPE 2022, Hannover, Germany, 05.-09.09.2022

Kostka, B.; Mertens, A. (2022): Practical Implementation of a Concept for In-Situ Detection of Humidity-Related Degradation of IGBT Modules, EPE 2022, Hannover, Germany, 05.-09.09.2022

Lengsfeld, S.; Grundmann, J.; Oomen, M.; Vargas-L.; Ponick, B.; Jung, M. (2022): Comparing Armature Windings for a 10 MW Fully Superconducting Synchronous Wind Turbine Generator, 12th CPEEE2022 (virtuell), 25.-27.02.2022, Shiga, Japan

Lichtenstein, T.; Fröhling, S.; Tegtmeier, B.; Fischer, K. (2022): Climatically Induced Insulation Degradation in Power Semiconductor Modules of Wind Turbines, EPE 2022, Hannover, Germany, 05.-09.09.2022

Lindemann, G.; Willich, V.; Mertens, A. (2022): Novel Quasi-Direct Rotor Position Estimator for Permanent Magnet Synchronous Machines based on the Back-Electromotive Force using Current Oversampling, EPE 2022, Hannover, Germany, 05.-09.09.2022

Manthey, T.; Khader, M.; Friebe, J. (2022): Transformer Design Optimization and Comparison for a DC-DC Converter used in PV Micro-Inverters, EPE 2022, Hannover, Germany, 05.-09.09.2022

Manthey, T.; Ranft, P.; Friebe, J. (2022): Cooling Concept and Molding Packaging for PV Module Integrated Micro-Inverters, CIPS 2022, Berlin, Germany, 15.-17.03.2022

Mirzadeh, M.; Mertens, A. (2022): Measurement-Based Component-Level Load Modeling for Evaluation of a Current-Suppressing Loading Scenario for Microgrid Black Start Events, ISGT 2022 North America (virtuell), 24.-28.04.2022, New Orleans, USA

Mirzadeh, M.; Strunk, R.; Erckrath, T.; Mertens, A. (2022): Power Hardware-in-the-Loop Verification of a Cold Load Pickup Scenario for a Bottom-up Black Start of an Inverter-dominated Microgrid, EPE 2022, Hannover, Germany, 05.-09.09.2022

Mirzadeh, M.; Strunk, R.; Matter, S.; Bekker, I.; Munderloh, M.; Erckrath, T.; Hofmann, L.; Mertens, A. (2022): A Rule-Based Concept for a Bottom-up Multi-Master Black Start of an Inverter-Dominated Low-Voltage Cell, PEDG 2022, Kiel, Germany, 26.-29.06.2022

Movagharnejad, H.; Knebusch, B.; Mertens, A.; Ponick, B. (2022): Design Interactions of AC- and DC-Side Filters for Traction Drives with SiC Inverters, EPE 2022, Hannover, Germany, 05.-09.09.2022

Schubert, M.; Wohlers, C.; Ponick, B. (2022): Efficient Determination of the Behavior of Permanent Magnet Synchronous Machines using Magnetic Equivalent Circuits, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Stallmann, F.; Fräger, L.; Mertens, A. (2022): Design of a Robust Voltage Control for Inverters with LC Filter based on the Internal Model Control, EPE 2022, Hannover, Germany, 05.-09.09.2022

Stallmann, F.; Liebchen, G.; Mertens, A. (2022): Initial Start and Synchronization Algorithm for Droop-Controlled Inverters Considering the Inner Voltage Control Loop, APPEEC 2022, Melbourne, Australia (hybrid), 20. - 23.11.2022

Stallmann, F.; Mertens, A. (2022): Frequency-Supporting Control of a Solid-State Transformer, COMPEL 2022, Tel Aviv, Israel, 20. -23.06.2022

Suchan, A.; Ponick, B. (2022): Time Efficient Calculation of Current Harmonics in Inverter-Fed Permanent Magnet Excited Synchronous Machines, ICEM 2022, Valencia, Spain, 05.-08.09.2022

Suchan, A.; Ponick, B. (2022): Time Efficient Calculation of Current Harmonics in Inverter-Fed Electrically Excited Synchronous Machines, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022

Wiesemann, J.; Dumtzlaff, J.; Mertens, A. (2022): Control of an Active Gate Driver for an Electric Vehicle Traction Inverter Using Artificial Neural Networks, EPE 2022, Hannover, Germany, 05.-09.09.2022

Wiesemann, J.; Mertens, A. (2022): Experimental Comparison of an Active Gate Driver and a dv/dt Filter to Reduce the Output dv/dt of a SiC EV Drive Inverter, IECON 2022, Brüssel, Belgium, 17.-20.10.2022

Ali, M.; Brinker, T.; Friebe, J.; Mertens, A. (2021): Analysis of EMI Filter Attenuation under the Influence of Parasitic Elements of Components and their Mutual Couplings, EPE’21 ECCE Europe (virtuell) 06.-10.09.2021

Ali, M.; Friebe, J.; Mertens, A. (2021): 3-D Electromagnetic Modeling and Analysis of Electromagnetic Field Couplings of EMI Filter Capacitors, ECCE Asia 2021

Ali, M.; Friebe, J.; Mertens, A. (2021): Design and Optimization of Input and Output EMI Filters under the Influence of Parasitic Couplings, EPE’21 ECCE Europe (virtuell) 06.-10.09.2021

Apte, P.; Lin, S.; Fraeger, L.; Friebe, J. (2021): Design Considerations for a 50 kW Dual Bridge Series Resonant DC/DC Converter with Wide-Input Voltage Range for Solid-State Transformers, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021

Bagaber, B.; Mertens, A. (2021): Fault Ride-Through Performance of Pumping-Cycle Airborne Wind Energy Generators with the Support of Optimally Sized Energy Storage System, ECCE Asia 2021 (Virtual), Singapore, 24-27.05.2021

Brinker, T.; Gehl, A.; Priefer, F.; Graue, J.; Sawang, F.; Wicht, B.; Friebe, J. (2021): Design of a Photovoltaic Power Supply for Nanosatellites, PCIM Europe digital days 2021, 03.– 07.05.2021, pp. 1317-1324

Brinker, T.; Hoffmann, L.; Friebe, J. (2021): Comparison of Modulation Techniques for a Single-Phase Full-Bridge Photovoltaic Micro-Inverter Considering Reactive Power Capability, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021, pp. 1-8

Cao, Y.; Fauth, L.; Mertens, A.; Friebe, J. (2021): Comparison and Analysis of Multi-State Reliability of Fault-Tolerant Inverter Topologies for the Electric Aircraft Propulsion System, 24th International Conference on Electrical Machines and Systems (ICEMS 2021), Gyeongju, Korea, 02.11.2021

Dierks, R.; Mertens A. (2021): Validation of an Extended Loss-Optimised Branch Energy Control for Modular Multilevel Converters under Unbalanced Grid Conditions, IECON 2021, Toronto, Canada (virtuell), 13.-16.10.2021

Ehlert, M.; Kalla, M. ; Michael, J.; Henke,C.; Traechtler, A.; Bagaber, B.; Ponick,B.; Dornaus, M. ; Demeisi, M. (2021): Tool-Independent Simulation of Electric Drive Systems with the E-Workbench, E-MOTIVE Expert Forum (virtuell) 21.-23.09.2021

Ehlert, M.; Michael, J.; Henke,C.; Traechtler, A.; Kalla, M.; Bagaber, B.; Ponick, B.; Mertens, A. (2021): Connecting Energy Storages from Tool Independent, Signal-flow Oriented FMUs, SMACD / PRIME 2021 | 19.-22.07.2021, Online Event

England, M.; Dotz, B.; Ponick, B. (2021): Evaluation of Winding Symmetry and Circulating Currents of Hairpin Windings, IEMDC 2021, (Virtual) Connecticut, USA, 17.-20.05.2021

Fauth, L.; Beckemeier, C.; Friebe, J. (2021): A Hybrid Active Neutral Point Clamped Converter consisting of Si IGBTs and GaN HEMTs for Auxiliary Systems of Electric Aircraft, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021

Fauth, L.; Mand, P.; Friebe, J. (2021): Selection of Test Site Locations for Long-Term Cosmic Radiation Tests, PCIM Europe digital days 2021, 03.– 07.05.2021, pp. 778-782

Fräger, L.; Ibrahim, M.; Langfermann, S.; Owzareck, M.; Friebe, J. (2021): AFE: Control Strategies under Unbalanced Grid Conditions, PCIM Europe digital days 2021, 03.– 07.05.2021

Fröhling, S.; Herwig, D.; Mertens, A. (2021): Contact-Integrated Temperature Measurement for Power Modules, EPE’21 ECCE Europe (virtual) 06.-10.09.2021

Hayes, J. G.; Cao, Y.; Yuan, X.; Suda, J. L.; Yang, X.; Friebe, J.; Ogashawara, O.; Renie, J. P.; Goodarzi, G.A. (2021): Global Perspectives on Electric Vehicle Education: Part I, EESD 2021 - Building Flourishing Communities, University College Cork, Ireland

Hayes, J. G.; Cao, Y.; Yuan, X.; Suda, J. L.; Yang, X.; Friebe, J.; Ogashawara, O.; Renie, J. P.; Goodarzi, G.A. (2021): Global Perspectives on Electric Vehicle Education: Part II, EESD 2021 - Building Flourishing Communities, University College Cork, Ireland

Heide, D.; Knebusch, B.; Ebrahimi, A.; Ponick, B. (2021): Measurement of Parasitic High-Frequency Currents in Inverter-Fed Low Speed Electrical Machines Using Rogowski Current Sensor, EPE’21 ECCE Europe (virtual) 06.-10.09.2021

Hoffmann, A.; Knebusch, B.; Stockbrügger, J.O.; Dittmann, J.; Ponick, B. (2021): High-Frequency Analysis of Electrical Machines Using Probability Density Functions for an Automated Conductor Placement of Random-Wound Windings, IEMDC 2021, Connecticut, USA, 17.-20.05.2021

Kifel, D.; Urbanek, S.; Ponick, B. (2021): Design Study on Additive Manufacturing Technologies in Permanent Magnet Synchronous Machines for Electric Aircraft, WEMDCD 2021 (virtuell), Modena, Italy, 08.-09.04.2021, pp. 325-330

Lin, S.; Ebrahimi, A.; Friebe, J. (2021): Impact of Electric Field on Magnetic Flux Distribution in Electrical Machines with Very Large Size, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021

Lorenz, M.; Kucka, J.; Mertens, A. (2021): A Modular Multilevel Converter with a Clamping Switch for Quasi-Three-Level Operation, 2021 22nd IEEE International Conference on Industrial Technology (ICIT), pp. 260-265

Manthey, T.; Brinker, T.; Friebe, J. (2021): Design of an Isolated DC-DC Converter for PV Micro-Inverters with Planar Transformer and PCB Integrated Winding, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021, pp. 554-560

Movagharnejad, H.; Knebusch, B.; Mertens, A.; Ponick, B. (2021): Traction Drives with SiC Inverters: Optimized Modelling and Design / Electrical Machines and Filter Configurations, E-MOTIVE Expert Forum (virtual) 21.-23.09.2021

Movagharnejad, H.; Mertens, A. (2021): Design Methodology for Dimensioning EMI Filters for Traction Drives with SiC Inverters, EPE’21 ECCE Europe (virtual) 06.-10.09.2021

Roche, J-P.; Friebe, J.; Niggemann, O. (2021): Neural Network Modeling of Nonlinear Filters for EMC Simulation in Discrete Time Domain, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society

Souza, L.; Acevedo-Bueno, D.; Vitorino, M.; Da Silva, E.; Friebe, J.; Lima, A. (2021): Single-Stage Isolated Half-Bridge/Full-Bridge Converter for DC/AC Applications, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021

Stallmann, F.; Mertens, A. (2021): Stability Assessment of Pω and PV Droop Controls in Highly Resistive Microgrids using Analytical Impedance Models, PEDG 2021, Virtual Conference 28.06.-01.07.2021

Strunk, R.; Sarstedt, M.; Mertens, A. (2021): Voltage Sensitivity Estimation Based on Measurements of Distributed PV Inverters, PEDG 2021, Virtual Conference 28.06.-01.07.2021

Tatusch, D.; Gorodnichev, A.; Haake, D.; Schnabel, F.; Friebe, J.; Jung, M. (2021): Hardware and Control Design Considerations for a Mobile 1 MW Input-Series Output-Parallel (ISOP) DC-DC Converter in Medium Voltage Range, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021

Urbanek, S.; Frey, P.; Magerkohl, S.; Zimmer, D.; Tasche, L.; Schaper, M.; Ponick, B. (2021): Design and Experimental Investigation of an Additively Manufactured PMSM Rotor, IEMDC 2021, (Virtual) Connecticut, USA, 17.-20.05.2021

Wiesemann, J.; Mertens, A. (2021): An Isolated Variable-Resistance Active Gate Driver for Use in SiC-Driven Inverters, IECON 2021, Toronto, Canada (virtuell), 13.-16.10.2021

Zhu, X.; Wohlers, C.; Ponick, B. (2021): Improved Analytical Calculation for 2D Current Displacement in Rectangular Conductors, ICECCME 2021, Mauritius (virtuell), 07.-08.10.2021, pp. 1-8

Ali, M.; Friebe, J.; Mertens, A. (2020): Simplified Calculation of Parasitic Elements and Mutual Couplings of Wide-Bandgap Power Semiconductor Modules, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020

Ali, M.; Müller, J.-K.; Friebe, J.; Mertens, A. (2020): Analysis of Switching Performance and EMI Emission of SiC Inverters under the Influence of Parasitic Elements and Mutual Couplings of the Power Modules, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020

Andresen, J.; Vip, S.; Mertens, A.; Paulus, S. (2020): Compensation of the Radial and Circumferential Mode 0 Vibration of a Permanent Magnet Electric Machine based on an Experimental Characterisation, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020

Andresen, J.; Vip, S.; Mertens, A.; Paulus, S. (2020): Theory of Influencing the Breathing Mode and Torque Pulsations of Permanent Magnet Electric Machines with Harmonic Currents, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020

Berweiler, B.; Ponick, B. (2020): Current and Average Temperature Calculation for Electrically Excited Synchronous Machines in Case of Contactless Energy Supply, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Brinker, T.; Willer, F.; Heeren, H.; Fauth, L.; Friebe, J. (2020): Design of a Hybrid Two-Stage GaN-Si Inverter for BLDC Motors, ICEMS 2020 (virtuell) 24.-27.11.2020

Dierks, R.; Kucka J.; Mertens A. (2020): Using Both the Circulating Currents and the Common-Mode Voltage for the Branch Energy Control of Modular Multilevel Converters, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020

Dokus, M.; Mertens, A. (2020): Sequence Impedance Characteristics of Grid-Forming Converter Controls, PEDG 2020 (virtuell) 28.09.2020

Dokus, M.; Mertens, A. (2020): Sequence Impedance Characteristics of Grid-Feeding Converters, ECCE Asia 2020 (virtuell) 29.11.-02.12.2020

Dokus, M.; Sarstedt, M.; Mertens, A. (2020): On the Stability of Converter-Dominated Power Systems: Impedance-Based Analysis, SGES 2020 (virtuell) 23.-26.11.2020

Dokus, M.; Stallmann, F.; Mertens, A. (2020): Sequence Impedance-Based Stability Analysis of AC Microgrids Controlled by Virtual Synchronous Generator Control Methods, IFAC 2020 13.07, (virtuell)

Ebersberger, J.; Müller, J.-K.; Mertens, A. (2020): Dynamic Characterization of a SiC-MOSFET Half Bridge in Hard- and Soft-Switching and Investigation of Current Sensing Technologies, EPE’20 ECCE Europe(virtuell )07.–11. 09.2020

Fauth, L.; Jusko, S.; Friebe, J.; Mertens, A. (2020): GaN HEMT Based Inverter for Driving Ultrasonic Transducers, ICEMS 2020 (virtuell) 24.-27.11.2020

Fricke, T.; Schwarz, B.; Ponick, B. (2020): A Magnetic Equivalent Circuit to Account for Gaps Between Clamping Plate Segments in Large Synchronous Machines, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Fricke, T.; Schwarz, B.; Ponick, B. (2020): Single Equation Clamping Plate Loss Model for Large Synchronous Machines, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Friebe, J.; Fauth, L. (2020): Efficiency Optimization for Partial Load Operation of Interleaved Converters, ICEMS 2020 (virtuell) 24.-27.11.2020

Gerlach, M.E.; Ponick, B. (2020): Influence of the Stator Winding and Forming of the End Winding on the Vibration Behavior of Electric Machine’s Stator Core, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg, pp.1171-1177

Gerlach, M.E.; Zajonc, M.; Ponick, B. (2020): Methodology to Evaluate the Mechanical Stress in High Speed Electric Machines with Buried Magnets, SPEEDAM 2020 (virtuell) 24.06.2020, Sorrento, pp. 84-91

Haschen, E.; Ponick, B. (2020): Calculation of Slot Leakage Flux Using Equivalent Magnetic Circuits, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Helmholdt-Zhu, T.; Knebusch, B.; Borcherding H. (2020): High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, PCIM 2020 (virtuell), 07.07.2020, Nürnberg

Herwig, D.; Brockhage, T.; Mertens, A. (2020): Combining Multiple Temperature-Sensitive Electrical Parameters Using Artificial Neural Networks, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020

Herwig, D.; Brockhage, T.; Mertens, A. (2020): Impact of Parasitics in Power Modules and Gate Drivers on TSEP-based Temperature Estimations, ICEMS 2020 (virtuell) 24.-27.11.2020

Himker, N.; Strunk, R.; Mertens, A. (2020): Grid Impedance Estimation with Oversampling for Grid-Connected Converters, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020

Himker, N.; Wächter, M.; Peinke, J.; Mertens, A. (2020): Dynamic Behaviour and Modelling of Variable-Speed Wind Turbines, PEDG 2020 (virtuell) 28.09.2020

Hoffmann, A.; Ponick, B. (2020): Statistical Deviation of High-Frequency Lumped Model Parameters for Stator Windings in Three-Phase Electrical Machines, SPEEDAM 2020 (virtuell) 24.06.2020, Sorrento, pp. 92-97

Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2020): Linear Direct Drive for Light Conveyor Belts to Reduce Tensile Forces, International Conference on Cyber-Physical Systems and Control (CPS&C'2019), pp. 398-406, https://www.springer.com/gp/book/9783030349820, DOI 978-3-030-34983-7_38

Lorenz, M.; Kucka, J; Mertens, A. (2020): Active Current and Energy Control for the Quasi-Three-Level Operation Mode of an Extended Modular Multilevel Converter Topology, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020

Mertens, A.; Movagharnejad, H.; Ali, M.; Mueller, J.-K.; Friebe, J. (2020): Design and Comparison of Filter Configurations for SiC Inverters, E-MOTIVE Expert Forum (virtual) 15.-17.09.2020

Roche, J.P.; Friebe, J.; Niggemann, O. (2020): Machine Learning for Grey Box Modelling of Electrical Components for Circuit- and EMC-Simulation, PCIM 2020 (virtuell), 07.07.2020, Nürnberg

Sarstedt, M.; Kluß, L.; Dokus, M.; Gerster, J.; Hofmann, L. (2020): Simulation of Hierarchical Multi-Level Grid Control Strategies, SGES 2020 (virtuell) 23.-26.11.2020

Schepe, C.; Haschen, E.; Ponick, B. (2020): Calculation of Circulating Currents in Parallel Branches of Salient Pole Synchronous Machines, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Stallmann, F.; Mertens, A. (2020): Sequence Impedance Modeling of the Matching Control and Comparison with Virtual Synchronous Generator, PEDG 2020 (virtuell) 28.09.2020

Suchan, A.; Ponick, B. (2020): Brush Dynamics in Electrically Excited Synchronous Machines and their Influence on the Field Winding, IECON 2020 (virtuell) 18.-21.10.2020, Singapur

Urbanek, S.; Keuter, R.; Peter, E.; Ponick, B. (2020): Effects of Continuous Rotor Skewing in Additively Manufactured Permanent Magnet Rotors, SPEEDAM 2020 (virtuell), 24.06.2020, Sorrento

Vip, S.-A.; Andresen, J.; Dräger, F.; Ponick, B. (2020): NVH-Simulation of Permanent Magnet Synchronous Traction Drives Including Torsional Mode Shapes, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Wankhede, Y.; Fauth, L.; Friebe, J. (2020): Design and Control of a Virtual DC-Link for a full GaN-based Single PhaseConverter with High Power Density, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020

Wohlers, C.; Ponick, B. (2020): First Estimations of Stator Dimensions for Permanent Magnet Synchronous Machines with Tooth-Coil Windings and Direct Liquid Cooling, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg

Wohlers, C.; Ponick, B. (2020): A Novel Method for the Fast Calculation of the Characteristics of PM Synchronous Machines, IECON 2020 (virtuell) 18.-21.10.2020, Singapur, pp. 832-837

Zhang, D.; Ebrahimi, A.; Wohlers, C.; Redlich, J. ; Ponick, B (2020): On the Analytical Calculation of Eddy-Current Losses in Permanent Magnets of Electrical Machines, IECON 2020 (virtuell) 18.-21.10.2020, Singapur

Andresen, J.; Ponick, B.; Mertens, A. (2019): Direct Radial and Circumferential Analytical Air-Gap Field Calculation for Electrical Machines, ACEMP-OPTIM 2019 27.-29.8.19, Istanbul

Brinker, T.; Fauth, L.; Lin, S.; Friebe, J. (2019): Impact of Passive Common Mode Cancellation on the Efficiency and Switching Performance of Power Converters, EPE’19 ECCE Europe, 02.-05.09.2019, Genova

Buchali, T.; Stallmann, F.; Mertens, A. (2019): "New Control Concept for a Safety-Critical Actuator in Highly Automated or Autonomous Cars", EPE’19 ECCE Europe, 02.-05.09.19

Dierks, R.; Kucka, J.; Mertens, A. (2019): Optimization of the Low-Frequency Mode for Modular Multilevel Converters Based On Frequency Domain Analysis Converters Based On Frequency Domain Analysis, EPE’19 ECCE Europe 02.-05.09.19, Genova

Dokus, M.; Mertens, A. (2019): Sequence Impedance-Based Stability Analysis of Droop-Controlled AC Microgrids, PEDG 03.-06.06.2019, Xian

Ebrahimi, A. (2019): Challenges of Developing a Digital Twin Model of Renewable Energy Generators, IEEE ISIE 2019, Vancouver, Canada, 12-14.06.2019

Ebrahimi, A.; Meiswinkel M. (2019): Modeling of Radial and Tangential Roebel Bar Force Distributions in Large Electrical Machines Considering Longitudinal Transposition, EEMODS 2019, Tokyo Japan, 17.-19.09.2019

Fauth, L.; Brinker, T.; Lin, S.; Friebe, J. (2019): Asymmetric Half-Bridge Configurations in Power Electronics Converters, EPE’19 ECCE Europe, 02.-05.09.2019, Genova

Fricke, T.; Schwarz, B.; Ponick, B. (2019): Schwarz-Christoffel-Based Open-Circuit Clamping Plate Field Calculation in Hydro Generators, IEEE IEMDC 12.-15. 05.2019 San Diego

Fricke, T.; Schwarz, B.; Ponick, B. (2019): A Novel Surface Impedance Based Clamping Plate Loss Model for Large Synchronous Generators, ACEMP-OPTIM 2019, 27.8-29.8.19, Istanbul

Friebe, J.; Lin, S.; Fauth, L.; Brinker, T. (2019): Premagnetized Inductors in Single Phase DC-AC and AC-DC- Converters, COBEP SPEC 2019, Santos, Brazil, 01.-05.12.19

Himker, N.; Lindemann G.; Mertens, A. (2019): Iterative Tracker for Anisotropy-Based Self-Sensing Control of PMSM, IEEE SLED 2019, Turin, Italien 09.-10.09.2019

Hoffmann, A.; Gerlach, M.; Lindemann, G.; Reitmeier, D.; Wiesemann J.; Mertens, A.; Ponick, B.; (2019): Hyper High-Speed for the Electrified Automotive Powertrain for Maximum Range, E-MOTIVE Expert Forum Schweinfurt 4.-5.09.2019

Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B. (2019): Design of an Integrated Linear Flux Modulating Motor for a Direct-Drive Belt Conveyor, IKMT2019, 10.-11.09.2019, Würzburg,

Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B. (2019): Operation Analysis of an Integrated Linear Flux Modulating Motor for a Direct-driven Belt Conveyor, EEMODS 2019, Tokyo Japan, 17.-19.09.2019,

Hullmann, M; Urbanek, S.; Ponick, B. (2019): Surface Eddy Current Suppression on Additively Manufactured Solid Rotor Active Parts, EEMODS 2019, Tokyo Japan, 17.-19.09.2019

Kalla, M.; Korolova, O.; Neufeld, A.; Hofmann, L.; Ponick, B. (2019): Calculating Frequency Responses of Synchronous Machines Using MIMO Transfer Functions, ACEMP-OPTIM 2019 27.8-29.8.19, Istanbul

Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2019): Linear Direct Drive for Light Conveyor Belts to Reduce Tensile Forces, AST 2019, St. Petersburg, Russia, 10.-12.06.2019

Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2019): Lineardirektantrieb für biegeschlaffe Transportbänder zur Reduzierung der Gurtzugkraft, 15. Fachkolloquium der WGTL in Rostock 11.+12.09.2019

Kucka, J.; Lin, S.; Friebe, J.; Mertens, A. (2019): Quasi-Two-Level PWM-Operated Modular Multilevel Converter With Non-Linear Branch Inductors, EPE’19 ECCE Europe 02.-05.09.19, Genova

Lin, S.; Brinker, T.; Fauth, L.; Friebe, J. (2019): Review of Dimensional Resonance Effect for High Frequency Magnetic Components, EPE’19 ECCE Europe, 02.-05.09.2019, Genova

Lin, S.; Friebe, J.; Langfermann, S.; Owzareck, M. (2019): Premagnetization of High-Power Low-Frequency DC-Inductors in Power Electronic Applications, PCIM 2019, Nürnberg

Lindemann G.; Himker, N.; Mertens, A. (2019): Enhanced Observer with Adaptive Reference Frame for Self-Sensing Control of PMSM, IEEE SLED 2019, Turin, Italien 09.-10.09.2019

Mirzadeh, M., Narjes, G., Ponick, B. (2019): Evaluation of High-Tech Electrical Steel in a High-Speed Permanent Magnet Synchronous Machine for an Aircraft Application, EEMODS 2019, Tokyo Japan, 17.-19.09.2019

Mueller, J.-K.; Manthey,T.; Han D.; Sarlioglu, B.; Friebe,J.; Mertens, A. (2019): Output Sine-Wave Filter Design and Characterization for a 10 kW SiC Inverter, ECCE USA, 29.09.19-03.10.19, Baltimore

Rehfeldt, A.; Fricke, T.; Emmrich, D.; Ponick, B. (2019): Semi-Analytical Calculation of Field Distribution in Yoke/Tooth Transition in Electrical Machines, IEEE IEMDC 12.-15.05.2019, San Diego

Rehfeldt, A.; Fricke, T.; Schwarz, B.; Ebrahimi, A.; Ponick, B. (2019): Semi-Analytical Calculation of Field and Loss Distribution in the Tooth Tips of Electrical Machines, EEMODS 2019, Tokyo Japan, 17.-19.09.2019

Trinh, N.; Atallah, A.; Sharma, K.; Kuhn, G.; Juretzek, U.; Rosendahl, J.; Bagaber, B.; Mertens, A. (2019): DFIG-Based Power Plant: System Description and Performance, IEEE PESGM 2019, 04.08.-08.08.2019, Atlanta

Urbanek, S.; Heide, D.; Bagaber, B.; Lohss, M.; Specht, B.; Paulig, X.; Mertens, A.; Ponick, B. (2019): Analysis of External Rotor Electric Drives for an All-Automatic Airborne Wind Energy System, IEEE IEMDC 2019, San Diego

Wiesemann, J.; Sommer, C.; Mertens, A. (2019): Switching Characteristics of a 1.2 kV SiC MOSFET Module using a Controllable Current-Sourced Gate Driver, PCIM 2019, Nürnberg, pp. 1466-1471

Zulk, S.; Mertens, A. (2019): Optimization of Air-Cooled On-Board Battery Chargers for Electric Vehicles Using WBG Devices, PCIM 2019, Nürnberg, 07.05.-09.05., pp .253-260

Berweiler, B.; Frey, P.; Ponick, B. (2018): Calculation of Continuous Power Curves for Electrically Excited Synchronous Machines with Air Cooling, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018

Denkena, B.; Bergmann, B.; Mücke, M.; Königsberg, J.; Ponick, B. (2018): Hybrid Spindle – An approach for a milling machine tool spindle with extended working range for HSC and HPC,  4th International Conference on System-Integrated Intelligence, Garbsen, Germany, 19 - 20.06.2018

Ebrahimi, A. (2018): Design Optimization of Permanent Magnet Synchronous Motors using Multilevel Ant Algorithm, 14th IEEE International Conference on Power Electronics, CIEP, Mexico 2018

Ebrahimi, A. (2018): A Novel Harmonic Current Control Algorithm for Torque Ripple Reduction of Permanent Magnet Synchronous Motors for Traction Application, 5th International Conference on Electrical Systems, IEEE ESARS, England, 2018

Ebrahimi, A. (2018): Characterization of a Large Electrical Machine Test Bench for Advanced Investigations on Wind and Hydro Generators, 4th IEEE Southern Power Electronics Conference, Singapore 2018

Fricke, T.; Rehfeldt, A.; Schwarz, B.; Bresemann, E.; Ponick, B. (2018): Analytical and Numerical Calculation of Sub-Conductor Circulationg Currents in Roebel Bars of Hydro Generators, IEEE ICEM 2018, Alexandroupoli Griechenland, 3-6. September 2018

Friebe, J.; Prior, O.; Kacki, M. (2018): High-Side Driver Supply with Reduced Coupling Capacitance, Power Conversion and Intelligent Motion (PCIM 2018), Nürnberg, 05.-07.06.2018

Gerlach, M.; Hoffmann, A.; Lindemann, G.; Reitmeier, D.; Sommer, S. (2018): Hochdrehzahl-Konzept für den elektrifizierten automobilen Antriebsstrang, Tag der Energieforschung 15.05.2018 Hannover

John, M.; Mertens, A. (2018): Frequency-Domain Model of Voltage-Source Inverters with Closed-Loop Current Control ,  IEEE Workshop on Control and Modeling for Power Electronics (COMPEL), Padova, Italy, 25.-28.06.2018

Juergens, J.; Redlich, J.; Ponick, B. (2018): Comparison of Direct and Axle Drives with Electrically Excited Synchronous Machines for Traction Applications, IEEE Transportation and Electrification Conference and Expo (ITEC 2018), Long Beach, USA, 13.-15.06.2018

Königsberg, J.; Ponick, B. (2018): Operating Characteristics of Actively Damped Motor Spindles, Symposium on Automated Systems and Technologies, (AST) Hannover, 27.-28.09.2018

Königsberg, J.; Reiners, J.; Böhse, F.; Bergmann, B.; Denkena, B.; Ponick, B. (2018): Stator-Integrated Damping of Chatter Vibrations for Induction Motor Spindles, 2018 International Conference on Electrical Machines and Systems (ICEMS 2018) Jeju, Korea, 07.-10.10.2018

Kucka, J.; Mertens, A. (2018): Improved Current Control of a Quasi-Two-Level PWM-Operated Modular Multilevel Converter, IEEE Energy Conversion Congress & Exposition (ECCE 2018), Portland, USA, pp. 2948-2955

Kucka, J.; Mertens, A. (2018): Common-Mode Injection Techniques for Quasi Two-Level PWM-Operated Modular Multilevel Converters, International Power Electronics Conference (IPEC 2018), Niigata, Japan, 20.-24.05.2018, pp. 1904-1911

Lindemann G.; Weber B.; Mertens A. (2018): Reducing the Low-Speed Limit for Back-EMF Based Self-Sensing Speed Control by Using an FPGA-Operated Dead-Time Compensation, 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives (SLED) 13.-14.09.2018

Müller, J.; Brinker, T.; Friebe, J.; Mertens, A. (2018): Output dv/dt Filter Design and Characterization for a 10 kW SiC Inverter, IEEE IECON 2018, Washington D.C., USA, 21-23.10.2018

Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J. R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System, AIAA / IEEE Electronic Aircraft Technology Symposium (EATS 2018), Cincinatti, USA, 12.-13.07.2018

Narjes, G.; Ponick, B. (2018): Novel Method for the Determination of Eddy Current Losses in the Permanent Magnets of a High-Speed Synchronous Machine, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018

Rehfeldt, A.; Fricke, T.; Schwarz, B.; Bresemann, E.; Ponick, B. (2018): Measurement of Sub-Conductor Circulating Currents in Roebel Bars of a Hydro Generator, IEEE ICEM 2018, Alexandroupoli Griechenland, 3-6. September 2018

Sewdien, V. N.; van der Meijden, M..; Breithaupt, T.; Hofmann, L.; Herwig, D.; Mertens, A.; Tuinema, B.; Rueda Torres, J. (2018): Effects of Increasing Power Electronics on System Stability: Results from MIGRATE Questionnaire, IEEE PES ICUE, Phuket, Thailand, 24 - 26 Oct. 2018

Urbanek, S.; Ponick, B. (2018): Surface Eddy Current Loss Reduction in Additively Manufactured Permanent Magnet Rotor Active Parts, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018

Urbanek, S.; Ponick, B.; Taube, A.; Hoyer, K.-P.; Schaper, M.; Lammers, S.; Lieneke, T.; Zimmer, D. (2018): Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine, IEEE Transportation and Electrification Conference and Expo (ITEC 2018), Long Beach, USA, 13.-15.06.2018

Ebrahimi, A. (2017): Stuttgart Exo-Jacket: an Exoskeleton for Industrial Upper Body Applications,  International Conference on Human System Interaction, HIS2017, Republic of Korea, 2017, pp. 258-263

Ebrahimi, A. (2017): Analytical Modeling of Permanent Magnetic Synchronous Motors Considering Spatial Harmonics,  Brazilian Power Electronic Conference, COBEP 2017, Brazil, 2017

Ebrahimi, A.; Gröninger, D.; Singer, R.; Schneider, U. (2017): Control Parameter Optimization of the Actively Powerd Upper Body Exoskeleton Using Subjective Feedbacks,  The 3rd International Conference on Control, Automation and Robotics, ICCAR, Japan, 2017, pp. 432-437

John, M.; Mertens, A. (2017): Harmonic Domain Model of an Open-Loop Controlled PWM Converter, XIX International Symposium on Theoretical Electrical Engineering, Ilmenau, Germany, 16.-19.07.2017

John, M.; Mertens, A.; Popp, M.; Mathis, W. (2017): Model Order Reduction for a Full Scale Grid Converter for Grid Simulations, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Karwatzki, D.; Dokus, M.; Mertens, A. (2017): Control of a Three-Phase to Five-Phase Modular Multilevel Matrix Converter Based on a Generalized Control Concept,  European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Kauth, F.; Narjes, G.; Müller, J.; Seume, J. (2017): Progress in Efficient High-Lift ,  AIAA Aviation and Aeronautics Forum and Exposition, 5.-9. Juni 2017, Denver, Colorado, USA

Korolova, O.; de la Torre, J.; Ponick B. (2017): Transient modeling of AC machines considering second order effects,  XIX International Symposium on Theoretical Electrical Engineering, Ilmenau, Germany, 16.-19.07.2017

Korolova, O.; Popp, M.; Mathis, W.; Ponick B. (2017): Performance of Runge-Kutta family numerical solvers for calculation of transient processes in AC machines,  20th International Conference on Electrical Machines and Systems (ICEMS)

Krone, T.; Mertens A. (2017): Optimized Design of the Electric Power Train for Wheel Hub Drive Systems Without Friction Brakes ,  European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Luecke, S.; Mertens, A. (2017): Self-sensing control of induction machines using an additional short-circuited rotor coil,  IEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, Italien, Sep.

Meinzer, C.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J. (2017): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts, Proceedings of the Global Power & Propulsion Society Zurich Forum, 16.-18.01.2017

Misir, O.; Brand, J.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part II: Analytical Steady-State Solution Method, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Misir, O.; Spyridonidis, I.; Bothmann, F.; Dreyer, M.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part I: Numerical Integration, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. (2017): Impact of Individual Pitch Control on Pitch Actuators in Megawatt Wind Turbines, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Movagharnejad, H.; Mertens, A. (2017): Design Metrics of Compensation Methods for Contactless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe), Warsaw, Poland, 11.-14.09.2017

Müller, J.; Mertens, A. (2017): Power Electronics Design for a direct-driven Turbo Compressor Used as Advanced High-Lift System in Future Aircraft, IEEE Industrial Electronics Society IECON17, Peking, China, 29.10-01.11.2017

Popp, M.; Mathis, W.; John, M.; Korolova, O.; Mertens, A.; Ponick, B; (2017): A Modified CCM Approach for Simulating Hierarchical Interconnected Dynamical Systems,  Proc. International Symposium on Circuits and Systems, ISCAS , Baltimore, US, pp. 1262–1265

Popp, M.; Mathis, W.; Korolova O.; Ponick B. (2017): Modeling and simulation of electrical machines within a CCM framework,  IEEE International Electric Machines and Drives Conference (IEMDC)

Redlich, J.; Juergens, J.; Brune, K.; Ponick, B. (2017): Synchronous Machines with Very High Torque Density for Automotive Traction Applications,  , IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Sommer, C.; Kortazar, I.; Larrazabal, I.; Mertens, A. (2017): Design of SiC-based DC-DC Converters for Future Offshore Wind Power Applications ,  International Conference on Silicon Carbide and Related Materials (ICSCRM), Washington, DC, 17.-22.09.2017

Urbanek, S.; Quattrone, F.; Ponick, B. (2017): Implementation and Validation of a New Analytic-Numeric Method for Dynamic Core Loss Calculation, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Weber, B.; Lindemann, G.; Mertens, A. (2017): Reduced observer for anisotropy-based position estimation of PM synchronous machines using current oversampling,  IEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, Italien

Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J. (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine Model, The Science of Making Torque from Wind (TORQUE 2016) München, 5.-7. October 2016

Dörbaum, M.; England, M.; Ponick, B. (2016): Analysis of Eddy Currents Influencing an Electromagnetic Tilting Actuator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Dörbaum, M.; Winkel, T.; Tappe, S.; Kotlarski, T.; Ortmaier; T. Ponick, B. (2016): Torque Measurements on an Electromagnetic Tilting Actuator, actuator 2016, Bremen, Germany, 13.-15. June 2016

Dück, P., Ponick, B. (2016): A Novel Iron-Loss-Model for Permanent Magnet Synchronous Machines in Traction Applications., 4th International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road Vehicles & International Transportation Conference (ESARS ITEC), Toulouse, Frankreich

Dück, P.; Lesniewski, P.; Ponick, B. (2016): Design and Analysis of Axial-Flux Permanent Magnet Synchronous Machines as Traction Drives for Electric Vehicles, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 376-381

Gragger, J.; Zanon, A.; De Gennaro, M.; Juergens, J.; Fricassè, A.; Marengo, L.; Echevarria, I. O.; Kinder, J. (2016): Design features of an innovative synchronous reluctance machine for battery electric vehicles application,  SAE World Congress and Exhibition, Detroit, USA, 12.-14. April 2016

Haschen, E.; Korolova, O.; Ponick, B. (2016): Verbesserte Vorausberechnung des Polstreuleitwerts von Schenkelpol-Synchronmaschinen , Symposium Elektromagnetismus, Technische Akademie Esslingen (TAE), Künzelsau, Germany

Heseding, J.; Mueller-Deile, F.; Mertens, A. (2016): Estimation of losses in permanent magnet synchronous machines caused by inverter voltage harmonics in driving cycle operation, 18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe

John, M.; Mertens, A.; Baruschka, L.; Alvarez, R.; Pieschel, M. (2016): Design and Evaluation of a Test Rig for Full-Size Grid Frequency Stabilizer Modules with Ultracapacitors, 18th European Conference on Power Electronics and Applications (EPE), Karlsruhe, Germany, 5-9 September 2016

Juergens, J.; Fricassè, A.; Marengo, L.; Gragger, J.; De Gennaro, M.; Ponick,B. (2016): Innovative Design of an Air Cooled Ferrite Permanent Magnet Assisted Synchronous Reluctance Machine for Automotive Traction Application,  International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016

Karwatzki, D.; Baruschka, L.; Dokus, M.; Kucka, J.; Mertens, A. (2016): Branch Energy Balancing with a Generalised Control Concept for Multilevel Topologies - Using the Example of the Modular Multilevel Converter ,  European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

Karwatzki, D.; Mertens, A. (2016): Control Approach for a Class of Modular Multilevel Converter Topologies, IEEE Energy Conversion Congress & Exposition (ECCE 2016), Milwaukee, USA

Kauth, F.; Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Seume, J. R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation 2016, Brüssel, Belgien, 11.-13. Oktober 2016

Koupeny, J.; Lücke, S.; Mertens, A. (2016): Extended Observer-Based Simultaneous Online Parameter Estimation of Inverter-Fed Squirrel-Cage Induction Machines Considering the Influence of Current and Speed Measurement Errors, 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): On-Line Semiconductor Switching Loss Measurement System for an Advanced Condition Monitoring Concept, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): Advanced Condition Monitoring System Based on On-Line Semiconductor Loss Measurements, IEEE Energy Conversion Congress and Exposition (ECCE 2016), Milwaukee, WI, USA, 18.-22. September 2016

Krone, T.; Mertens, A. (2016): DC Link RMS Current Estimation in Systems with Several Converters Connected to a Shared DC Link with Distributed Capacitors, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krupp, H.; Mertens, A. (2016): Semi-Analytical Loss Model for Rotary Transformers; European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

Kucka, J.; Karwatzki, D.; Mertens, A. (2016): AC/AC Modular Multilevel Converters in Wind Energy Applications: Design Considerations, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Kucka, J.; Mertens, A. (2016): Control for Quasi Two-Level PWM Operation of Modular Multilevel Converter, IEEE International Symposium on Industrial Electronics (ISIE), Santa Clara, USA

Lammers, S.; Adam, G.; Schmid, H. J.; Mrozek, R.; Oberacker, R.; Hoffmann, M. J.; Quattrone, F.; Ponick, B. (2016): Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine, 6th International Electric Drives Production Conference (EDPC), Nuremberg, 2016

Lücke, S.; Koupeny, J.; Mertens, A. (2016): Induction Machine Speed Tracking Based on Rotor Slot Harmonics Using a Modified PLL Approach , 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Mertens, A.; Steinbrink, J. (2016): Generator-Umrichter-Prüfstand zur Untersuchung elektrischer Energiewandler in Antriebssträngen, ETG Mitgliederinformationen 2/2016, pp. 4-5

Misir, O.; Görsdorf, J.; Ponick, B. (2016): Determination of the Inductances of a Salient Pole Synchronous Machine Based on the Voltage Equation of a Single Damper Loop,  23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 470-475

Misir, O.; Potoniec, A.; Ponick, B. (2016): Calculation of the Damper Winding Inductances of a Synchronous Machine, The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), Glasgow, Scotland

Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R., Ponick, B. (2016): Calculation Method of Three-Phase Induction Machines equipped with Combined Star-Delta Windings, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, pp. 168-174

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Dependency of the Lifetime Estimation of Power Modules in Fully Rated Wind Turbine Converters on the Modelling Depth of the Overall System, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor Frequencies, TORQUE 2016, München, Germany, 5.-7. Oktober 2016

Movagharnejad, H.; Mertens, A. (2016): Design Optimization of Various Contactless Power Transformer Topologies for Wireless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September

Müller-Deile, F.; Heseding, H.; Ponick, B.; Mertens, A. (2016): Bezahlbare elektrische Reichweite durch Modularität,Deutsches Ingenieurblatt 5-2016, pp. 54-60

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles & International Transportation Electrification Conference, Toulouse, Frankreich, 02.-04. November 2016

Oelkers, F., Weber, B., Mertens, A. (2016): Oversampling Based Approach for Open Circuit Fault Detection in PMSM Drive Systems, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Quattrone, F.; Ponick, B. (2016): Evaluation of a Permanent Magnet Synchronous Machine with a Rotor Coil for Improved Self-Sensing Performance at Low Speed, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, 2016

Rogge, T.; Daub, U.; Ebrahimi, A.; Schneider, U. (2016): Der interdisziplinäre Entwicklungsprozess von aktiv angetriebenen, körpergetragenen Exoskeletten für die oberen Extremitäten am Beispiel des Stuttgart Exo-Jacket,  Zweite interdisziplinäre Konferenz zum Thema „Technische Unterstützungssysteme, die die Menschen wirklich wollen“, Hamburg, 2016

Sommer, C.; Kortazar, I.; Larrazabal, I.; Mertens, A. (2016): Analytical Investigation of the Three-Phase Single Active Bridge for Offshore Applications ,  18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)

Tappe, S.; Dörbaum, M.; Kotlarski, T.; Ponick, B.; Ortmaier, T. (2016): Kinematics and Dynamics Identification of a Hyper-Redundant, Electromagnetically Actuated Manipulator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Ullrich, B.; Mertens, A. (2016): Temperature estimation for wire bondings in power semiconductor devices, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

Vip , S.-A. ; Weber, J.-N., Rehfeldt, A. ; Ponick, B. (2016): Rotary Transformer with Ferrite Core for Brushless Excitation of Synchronous Machines ,  International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016

von Hofen, M.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2016): Hybrid offshore HVDC converter with diode rectifier and Modular Multilevel Converter, 2016 IEEE 7th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Vancouver, BC, 2016, pp. 1-7.

Weber, B.; Brandt, T.; Mertens, A. (2016): Compensation of switching dead-time effects in voltage-fed PWM inverters using FPGA-based current oversampling,  Applied Power Electronics Conference and Exposition (APEC)

Weber, J.-N., Rehfeldt, A. ; Vip , S.-A. ; Ponick, B. (2016): Rotary Transformer with Electrical Steel Core for Brushless Excitation of Synchronous Machines ,  International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016

Zulk, S.; Köneke, T.; Mertens, A. (2016): Analytical Modeling of Plate Fin Heat Sinks for Natural Convection Cooling in Power Electronics, IEEE 13th Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, 17-.-20. Oktober 2016

Dietz, R., Mertens, A.  (2015): Extended Power Control for Distributed Generation Units,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-9

Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T. ; Mertens, A.; Ponick, B. (2015): Simulation and Measurement on a Novel Electromagnetic Tilting Actuator,  VDI Mechatroniktagung 2015, Dortmund, Germany, 12.-13. März 2015

Dörbaum, M.; Weber, S.; Strempel, J.; Winkel, T.; Mertens, A.; Ponick, B. (2015): Comparison of two alternative power supply strategies for an electromagnetic tilting actuator,  Innovative Small Drives and Micro-Motor Systems (IKMT), 10. ETG/GMM-Fachtagung, Koeln, Germany, 14.-15. September 2015, pp. 71-76

Dück, P.; Jürgens, J.; Ponick, B. (2015): Calculation of Synchronous Reluctance Machines Used as Traction Drives,  IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-5

Friebe, J.; Meinhardt, M. (2015): Future Challenges of Power Electronics for PV-Inverters,  PCIM 2015, Nürnberg, Germany, 19.-21.05.2015

Guseva, A.; Hoffmann, M.; Unger, A.; Zulk, S.; Amien, M.; Sarradj, E.; Kupnik, M. (2015): Ultrasonic Transducer Characterization in Air Based on an Indirect Acoustic Radiation Pressure Measurement,  IEEE International Ultrasonic Symposium (IUS), Taipei, Taiwan, 21.-24. Oktober 2015, pp. 1-4

Jürgens, J.; Winter, O.; Fricassè, A.; Ponick, B. (2015): Influences of Iron Loss Coefficients Estimation on the Prediction of Iron Losses for Variable Speed Motors,  IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Jürgens, J; Ponick, B. (2015): Eignung von synchronen Reluktanzmaschinen und permanenterregten Synchronmaschinen ohne Seltenerdmagnete als Fahrzeugantriebe,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015

Kaczorowski, D.; Michalak, B.; Mertens, A.  (2015): A Novel Thermal Management Algorithm for Improved Lifetime and Overload Capabilities of Traction Converters,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Karwatzki, D.; Baruschka, L.; Kucka, J.; Mertens, A. (2015): Current Control and Branch Energy Balancing of the Modular Multilevel Matrix Converter ,  IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015

Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Survey on the Hexverter topology — A modular multilevel AC/AC converter,  9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp.1075-1082

Koupeny, J.; Lücke, S.; Mertens, A. (2015): Observer-Based Online Parameter Estimation of Squirrel-Cage Induction Machines Based on the Gradient Descent Method,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Koupeny, J.; Siebrecht, M.; Lücke, S.; Mertens, A. (2015): Observer-Based Online Parameter Estimation of Doubly Fed Induction Generators Based on the Gradient Descent Method,  International ETG Congress 2015 - die Energiewende, Bonn, Germany, 17.-18. November 2015

Krone, T.; Xu, C.; Mertens, A. (2015): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors,  IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 2715-2722

Krupp, H., Mertens, A. (2015): Rotary Transformer Design for Brushless Electrically Excited Synchronous Machines,  IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Kucka, J.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Improved Modular Multilevel Converter Topology with Magnetically Coupled Branch Inductors,  IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 3593-3600

Kucka, J.; Karwatzki, D.; Mertens, A. (2015): Optimised Operating Range of Modular Multilevel Converters for AC/AC Conversion with Failed Modules,  European Conference on Power Electronics and Applications (EPE’2015 ECCE-Europe), Geneva, Switzerland

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Salient-Pole Synchronous Machine without Damper Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 10th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Guarda, Portugal,  pp. 117-123

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Synchronous Machine with Unsymmetrical Stator Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 18th International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia,  International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, pp. 306-311

Oelkers, F.; Krone, T.; Rosen, A.; Mertens, A. (2015): Implementation and Test of a Fault-Tolerant Wheel Hub Drive System for an Electric Vehicle,  IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Oelkers, F.; Rosen, A.; Mertens, A. (2015): Model-based Approach for Sensor Fault-tolerant Drive Systems,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Quattrone, F.; Ponick, B.  (2015): Active Differential Inductance Control of Permanent Magnet,  IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-7

Quattrone, Francesco; Ponick, Bernd; Fricke, Torben (2015): Influence of punch edges on the self-sensing capabilities of permanent magnet synchronous machines with different rotor topologies,  Electric Drives Production Conference (EDPC), Nuremberg, Germany, 15.-16. September 2015, pp.1-4

Rosen, A,; Groninger, M.; Mertens, A. (2015): Modeling and optimized control of fault-tolerant H-bridge fed multiphase drives,  17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-6

Stübig, C.; Seibel, A.; Schleicher, K.; Haberjan, L.; Kloepzig, M.; Ponick, B. (2015): Electromagnetic Design of a 10 MW Permanent Magnet Synchronous Generator for Wind Turbine Application,  IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Tappe, S.; Dörbaum, M.; Mertens, A.; Ponick, B.; Kotlarski, J.; Ortmaier, T. (2015): The Kinematic Synthesis of a Spatial, Hyper-Redundant System based on Binary Electromagnetic Actuators,  6th International Conference on Automation, Robotics and Applications (ICARA 2015), Queenstown, New Zealand,17.-19. Februar 2015, pp. 211-216

Weber, B.; Wiedmann, K.; Mertens, A. (2015): Increased Signal-to-noise Ratio of sensorless control using current oversampling,  9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp. 1129-1134

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Dynamic Behavior of the Doublegenerator System for Hydraulic Power Plants,  Power Electronics for Distributed Generation Systems (PEDG), 2015 IEEE 6th International Symposium on, Aachen, Germany, 22.-25. Juni 2015, pp. 1-7

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Modeling of a Novel Speed Variable Generator System for Hydroelectric Power Plants,  International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe), Nürnberg, Germany, pp. 1-10

Zulk, S.; Mertens, A. (2015): Characterization of Dead Time Effects for Common-Mode-Reducing Modulation Methods,  IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

C. Sommer, A. Merkert, A. Mertens (2014): A New Control Method for Minimizing the DC-Link Capacitor Current of HEV Inverter Systems,  IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp.1188-1193

D. Karwatzki, L. Baruschka, J. Kucka, M. von Hofen, A. Mertens (2014): Improved Hexverter Topology with Magnetically Coupled Branch Inductors,  EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Branch Energy Control for the Modular Multilevel Converter Hexverter,  Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp.1613-1622

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Optimised Operation Mode for the Hexverter Topology Based on Adjacent Compensating Power,  Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5399-5406

D. Karwatzki, M. von Hofen, L. Baruschka, A. Mertens (2014): Operation of Modular Multilevel Matrix Converters with Failed Branches,  40th Annual Conference of IEEE Industrial Electronics Society (IECON 2014), Dallas, TX, USA, pp. 1650-1656

Ebrahimi, A.; Fabian, M. (2014): Verification of electrical drives and validation of their dynamic performance in rehabilitation equipment,  International Conference on Orthopädie and REHA, Leipzig, Germany, 2014

Ebrahimi, A.; Minzenmay, D.; Budaker, B.; Schneider, U. (2014): Bionic Upper Orthotics with integrated EMG sensory,  23rd IEEE International Symposium on Robot and Human interactive Communication, Edinburgh, Scotland, 2014

Emmrich, K. (2014): Energieeffizienz - im System ggf. ganz anders, als es die Komponente verspricht,  13. Technischer Tag der VEM-Gruppe, Wernigerode, Germany, 30. September 2014

F. Boseniuk and B. Ponick (2014): Parameterization of transient thermal models for permanent magnet synchronous machines exclusively based on measurements,  Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on. IEEE, pp. 295-301

F. Fuchs and A. Mertens (2014): Prediction and Avoidance of Grid-Connected Converter's Instability caused by Wind Park Typical, Load-Varying Grid Resonance,  Energy Conversion Congress and Exposition (ECCE), IEEE 14-18 Sept., Pittsburgh, PA, USA, pp. 2633-2640

F. Fuchs, R. Dietz, S. Garske, T. Breithaupt, A. Mertens, L. Hofmann (2014): Challenges of grid integration of distributed generation in the interdisciplinary research project Smart Nord,  IEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), pp. 1-7

Groninger, M.; Horch, F.; Kock, A,; Jakob, M.; Ponick, B (2014): Cast Coils for Electrical Machines and their Application in Automotive and Industrial Drive Systems,  4th International Electric Drives Production Conference (EDPC 2014), Nürnberg, Germany, 30. September - 1. October, pp. 1-7

Hinze, J.; Zacharias, P.; Araujo, S.; Friebe, J.; Leifert, T. (2014): Power Semiconductor Packaging in PV Inverters up to 30kW power, a difficult choice,  CIPS 2014, Nürnberg, Germany, 25.-27.02.2014

J. Jürgens, A. Brune, B. Ponick (2014): Electromagnetic design and analysis of a salient-pole synchronous machine with tooth-coil windings for use as a wheel hub motor in an electric vehicle,  XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 744-750

John, M.; Mendoza-Araya, P.A.; Venkataramanan, G. (2014): Small signal impedance measurement in droop controlled AC microgrids,  IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 702-709

K. Emmrich, A. Brune, B. Ponick (2014): Evaluation of an analytical, efficiency-optimized torque-speed characteristic of induction machines coupled with a thermal-electromagnetic energy consumption calculation,  XXIth International Conference on Electrical Machines (ICEM), Berlin, pp. 762-767

Kock, A.; Gröninger, M.; Mertens, A. (2014): Modeling and Optimized Control of Fault-tolerant Drive Topologies for Electric Vehicle Applications,  XXIst International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 2372-2379

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2014): Universelles Werkzeug zur Steigerung der Energieeffizinz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik,  SIMPEP-Kongress Koblenz, 17.-19. September 2014

Koupeny, J.; Mertens, A. (2014): Offline and Online Parameter Estimation of Controlled Electric Drives,  Symposium with the Institute of Thermomechanics of the Academy of Sciences, Prague, Czech Republic, Sept. 2014

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): A New Modular Multilevel AC/DC Converter Topology Applied to a Modular Multilevel DC/DC Converter,  EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): Low-speed Drive Operation of the Modular Multilevel Converter Hexverter Down to Zero Frequency,  Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5407-5414

M. Wehner and B. Ponick (2014): Search coil systems for early fault detection in wind turbine generators,  2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Ischia, Italy, 18.-20. Juni 2014, pp. 273-278

Misir O.; Ponick B. (2014): Analysis of Three-Phase Induction Machines with Combined Star-Delta Windings,  IEEE 23rd International Symposium on Industrial Electronics (ISIE), Istanbul, Turkey, 1.-4. Juni 2014, pp. 756-761

O. Korolova, P. Dück, A. Brune, J. Jürgens, B. Ponick (2014): Prediction of Efficiency-optimized Salient-pole Synchronous Machines’ Operating Range Using a Coupled Numerical-Analytical Method,  XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 871-876

T. Krone, T. Koneke, A. Mertens (2014): System design for junction temperatures up to 200°C,  16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), Lappeenranta, Finland, 26.-28. August 2014, pp. 2238-2245

Weber, S.; Merkert, A.; Mertens, A. (2014): Gate driver for safe operation of depletion mode SiC JFETs,  IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 5716-5722

Budaker, B.; Ebrahimi, A. (2013): Electric motors in wearable rehabilitation devices,  3rd International Electric Drives Production Conference, Nuremberg, Germany, 2013

Dörbaum, M.; Juris, P.; Stübig, C.; Ponick, B. (2013): Design of High-Speed Motors with a High Power Range for Use in Future Aircrafts,  PCIM Europe 2013, Nuremberg, Germany, pp. 89-96

Dreher, F.; Ebrahimi, A.; Parspour, N. (2013): Balancing torque loss and cogging reduction at PM transverse flux machines segmented stator phases,  International Conference on power conversion and intelligent motion, PCIM, Nuremberg, Germany, 2013

Dück, P.; Ponick, B. (2013): Einfluss unterschiedlicher Regelungsstrategien auf das Betriebsverhalten und den Wirkungsgrad von permanentmagneterregten Synchronmaschinen,  ETG Kongress, Berlin, Deutschland

Ebrahimi, A.; Dreher, F.; Parspour, N. (2013): Sensorless direct torque control of transverse flux machines with hybrid flux conduction,  International Conference on power conversion und intelligent motion, PCIM, Nuremberg, Germany, 2013

Ebrahimi, A.; Maier, M.; Parspour, N. (2013): Analysis of Torque Behavior of Permanent Magnet Synchronous Motor in Field-Weakening Operation,  Power and Energy Conference at Illinois (PECI), IEEE Conference Publications, USA, 2013, 120-124

Ebrahimi, A.; Parspour N. (2013): Modified Analytical Modeling of Surface Mounted Permanent Magnet Synchronous Motor- Design and Prototype Tests,  International Conference on power engineering, energy and electrical drives, IEEE Conference Publications, Istanbul, Turkey, 2013

Ebrahimi, A.; Parspour, N.; Fabian, M. (2013): Design and Qualitative Thermographic Comparison of Different Power Inverter Packaging,  4th International conference on power engineering, energy and drives, IEEE Conference Publications, Istanbul, Turkey, 2013.

Emmrich, J.; Ponick, B.; Bickel, W.; Denkena, B. (2013): Analysis of an integrated electromagnetic actuator prototype,  Innovative Klein- und Mikroantriebstechnik (GMM-FB 76), Nürnberg

Fuchs, F.; Pham, D.V.; Mertens, A (2013): Einfluss der Netzimpedanz auf die Dynamik der netzseitigen Stromregelung am Beispiel einer Windenergieanlage,  ETG Kongress, Berlin

Fuchs, F.; Pham, D.V.; Mertens, A. (2013): Stabilität der Stromregelung eines Netzpulsstromrichters für Vollumrichterwindenergieanlagen in Abhängigkeit der Windparkkonfiguration,  ETG Kongress

Fuchs, F; Pham, D.V.; Mertens, A. (2013): Analysis of Grid Current Control in Consideration of Voltage Feedforward and Cable Capacitance Demonstrated on a Fully Sized Wind Turbine Installed in a Wind Park,  IEEE Energy Conversion Congress & Expo, Denver, Colorado, USA

Hofen, M. v.; Baruschka, L.; Karwatzki, D.; Mertens, A. (2013): Comparison of Modular Multilevel Converters for the Grid Connection of Large-Scale Wind Turbines,  Wind Integration Workshop, London

Hofmann, K.; Herold, C.; Beier, M.; Lutz, J.; Friebe, J. (2013): Reliability of discrete power semiconductor packages and systems – D²Pak and CanPAK in comparison,  EPE 2013, Lille, France, 03.-05.09.2013

Karimi, R.; Koeneke T.; Kaczorowski, D.; Werner, T.; Mertens, A. (2013): Low Voltage and High Power DC-AC Inverter Topologies for Electric Vehicles,  ECCE 2013, Denver, Colorado, USA

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer Antriebssysteme,  ETG Kongress, Berlin

Meyer, R.; Zlotnik, A.; Mertens, A. (2013): Fault Ride Through Control of Medium-Voltage Converters with LCL Filter in Distributed Generation Systems,  IEEE Energy Conversion Congress and Exposition (ECCE), Denver, CO, United States

P. Juris, A. Brune, S. Tegeler, B. Ponick (2013): Einfluss der Magnetmaterialien auf die Energieeffizienz elektrischer Fahrzeugantriebe für verschiedene Fahrzyklen,  ETG Kongress, Berlin

Tegeler, S.; Ponick, B. (2013): Einfluss der Schrägung auf die Ummagnetisierungsverluste bei Drehfeldmaschinen,  ETG Kongress

Teichel, S.; Dörbaum M.; Ponick, B.; Seume, J. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations, SFB 880 - Fundamentals of high-lift for future commercial aircraft,  Biennial Report - Forschungsbericht 2013-03, TU Braunschweig, pp. 122-134

Wöhrmann, M.; Dörbaum, M.; Ponick, B.; Mertens, A. (2013): Design of a Fully Actuated Electromagnetic Bending Actuator for Endoscopic Applications,  9. GMM/ETG-Fachtagung Innovative Small Drives and Micro-Motor Systems (IKMT), Nuremberg, pp. 152-157

Yavuz, S.; Parspour, N.; Ebrahimi, A. (2013): Design of a Switched Reluctance Machine as a Near-Wheel Motor for Electric Vehicles,  International Conference on power conversion und intelligent motion, PCIM, Nuremberg, Germany, 2013

A. Brune, P. Dück, A. Kock, M. Gröninger and B. Ponick (2012): Evaluation of an Efficiency-optimized Calculation of PM Synchronous Machines’ Operating Range Using Time-saving Numerical and Analytical Coupling,  Vehicle Power and Propulsion Conference (VPPC), Seoul, Südkorea

Dreher, F.; Ebrahimi, A.; Parspour, N. (2012): Optimizing the control behavior of Transverse Flux Machines by the use of hybrid flux conduction,  International Conference and Exposition on Electrical and Power Engineering (EPE), IEEE Conference Publications, Romania, 2012

Ebrahimi, A..; Budaker, B.; Parspour, N. (2012): Adaption of an EC‐ motor for actively controlled knee“,  International Conference on Orthotics and Prosthetics, Leipzig, Germany, 2012

Fuchs, F.; Mertens, A. (2012): Dynamic modeling of a 2 MW wind turbine for converter issues : part 1,  Power Electronics and Motion Control (EPE PEMC 2011 ECCE Europe), Proceedings of the 2012-15th International Conference and Expositon on, Novi Sad, Serbia

Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick (2012): Design of an Integrated Electromagnetic Actuator for High Frequency Damping Forces,  XXth International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Kriese, M.; Wittek, E.; Gattermann, S.; Tischmacher, H.; Poll, G.; Ponick, B. (2012): Influence of bearing currents on the bearing lifetime for converter driven machines,  XXth International Conference on Electrical Machines (ICEM), pp. 1735-1739

Merkert, A.; Krone, T.; Mertens, A. (2012): Characterization and Scalable Modelling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices,  IEEE Vehicle Power and Propulsion Conference (VPPC 2012), Seoul, Korea

Meyer, R.; Mertens, A. (2012): Design of LCL Filters in Consideration of Parameter Variations for Grid-Connected Converters,  IEEE Energy Conversion Congress & Exposition (ECCE), Raleigh, NC, USA

Meyer, R.; Mertens, A. (2012): Design and Optimization of LCL Filters for Grid-Connected Converters,  15th International Power Electronics and Motion Control Conference (EPE-PEMC ECCE Europe), Novi Sad, Serbia

P. Juris, A. Brune and B. Ponick (2012): A Coupled Thermal-Electromagnetic Energy Consumption Calculation for an Electric Vehicle with Wheel Hub Drive Considering Different Driving Cycles,  Vehicle Power and Propulsion Conference (VPPC)

Quattrone, F.; Lorenz, R.D (2012): Dynamic modeling of losses in electrical machines for active loss control,  Energy Conversion Congress and Exposition (ECCE), pp.47-52

Sonnenschein, M.; Appelrath, H.-J.; Hofmann, L.; Kurrat, M.; Lehnhoff, S.; Mayer, C.; Mertens, A.; Uslar, M.; Nieße, A.; Tröschel, M. (2012): Dezentrale und selbstorganisierte Koordination in Smart Grids ,  VDE-Kongress 2012 Smart Grid Intelligente Energieversorgung der Zukunft

Stuebig, C.; Ponick, B. (2012): Practical Experiment for Students: Winding an Induction Machine,  20th International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines for the Entire Speed Range with Reduced Computational Effort based on a Novel MRAS Approach,  Power Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on

Wiedmann, K; Mertens, A (2012): Novel MRAS Approach for Online Identification of Key Parameters for Self-Sensing Control of PM Synchronous Machines,  15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines Including Online System Identification Based on a Novel MRAS Approach,  3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI

Wittek, E.; Kriese, M.; Tischmacher, H.; Gattermann, S.; Ponick, B.; Poll, G. (2012): Capacitance of bearings for electric motors at variable mechanical loads,  XXth International Conference on Electrical Machines (ICEM), pp. 1602-1607

Yanhui, X.; Vollmer, U.; Ebrahimi, A.; Parspour, N. (2012): Online estimation of the stator resistances of a PMSM with consideration of magnetic saturation,  International Conference and Exposition on Electrical and Power Engineering (EPE), IEEE Conference Publications, Romania, 2012

Al Nahlaoui, Braunisch, Eichinger, Kulig, Ponick (2011): Calculation Methods for Electromagnetically Exited Noise in Induction Motors,  EDPC2011

Baruschka, L.: Mertens, A. (2011): A New 3-Phase Direct Modular Multilevel Converter, EPE European Conference on Power Electronics and Applications,  (EPE 2011), Birmingham, UK, 2011

Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge and Modular Multilevel Converters for BESS Application,  IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA

Baruschka, L.; Mertens, A. (2011): Untersuchung Modularer Multilevel-Topologien zur Netzanbindung von Batteriespeichern,  ETG-Kongress 2011, Würzburg

Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge Converters and Modular Multilevel Converters for the use in Medium Voltage Grid Connected Battery Energy Storage Systems,  The 21st International Conference and Exhibition on Electricity Distribution (CIRED 2011), Frankfurt/Main

Baruschka, L.; Mertens, A. (2011): A New 3-Phase AC/AC Modular Multilevel Converter with Six Branches in Hexagonal Configuration,  IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA

Brune, E.; Stübig, C.; Tegeler, S.; Wehner, M.; Ponick, B. (2011): Kopplung numerischer und analytischer Verfahren zur Berechnung von permanenterregten Synchronmaschinen mit Anlaufkäfig,  ETG Würzburg

Dang, L.; Kuhn, H.; Mertens, A. (2011): Digital Adaptive Driving Strategies for High-Voltage IGBTs,  IEEE Energy Conversion Congress and Exposition, (ECCE 2011), Phoenix, AZ, USA

Fuchs,F.; Mertens, A. (2011): Steady State Lifetime Estimation of the Power Semiconductors in the Rotor Side Converter of a 2 MW DFIG Wind Turbine via Power Cycling Capability Analysis,  14th European Conference on Power Electronics and Applications 2011, EPE 2011, September 2011, Birmingham, United Kingdom

Gröninger, M., Horch, F., Kock, A., Pleteit, H., Ponick, B., Schmidt, D., Wöstmann, F.-J. (2011): Casting Production of Coils for electrical Machines,  Electric Drives Production Conference Nürnberg

Jae Suk Lee; Wei Xu; Hurst, Z.; Bradley, B.; Quattrone, F.; Lorenz, R.D. (2011): Time optimal torque control and loss minimization in AC machines using deadbeat direct torque and flux control,  Electrical Machines and Systems (ICEMS), pp.1-6

Janssen, G., Wiedmann, K., M. v. Hofen, Mertens, A., Ponick, B. (2011): Entwicklung von Antriebssystemen basierend auf elektromagnetische Mikromotoren,  Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11.-12. Oktober 2011 in Karlsruhe

Jastrzembski, Ponick (2011): Design of a Conveyor Directly Driven by a Hybrid Linear Motor following FEM and Reluctance Network Approach,  LDIA 2011, Eindhoven (Holland)

Köneke T., Mertens A., Domes D., Kanschat P (2011): Highly Efficient 12kVA Inverter with Natural Convection Cooling Using SiC Switches,  PCIM Europe 2011, Nuremberg, Germany

Meyer, R.; Mertens, A. (2011): Auslegung eines LCL Filters für Umrichter mit niedriger Schaltfrequenz in dezentralen Erzeugungsanlagen,  ETG Kongress 2011, Würzburg

Radosavac, Froböse, Overmeyer, Jastrzembski, Ponick (2011): Lineardirektantrieb für Transportbänder,  WGTL Kolloqium 2011, Hannover

Averberg, A.; Tran, H. N. ; Nguyen, C. Q. ; Mertens A. (2010): Two-Stage Interleaved Power Conditioner for Connecting a 5 kW el. SOFC with a 750 V DC Link ,  The 2010 International Power Electronics Conference - ECCE Asia (IPEC 2010), Sapporo, Japan

Brune A., Dempewolf K.-H., Ponick B. (2010): Modelling and FE Parameter Identification of Permanent Magnet Synchronous Machines in Consideration of Spatial Harmonics,  XIX International Conference on Electrical Machines ICEM 2010, Rom

E. Wittek, M. Kriese, H. Tischmacher, S. Gattermann, B. Ponick, G. Poll (2010): Capacitances and lubricant film thicknesses of motor bearings under different operating conditions ,  ICEM 2010 (Rom)

Fuchs, F. Dannehl, J. Fuchs, F. W. (2010): Discrete Sliding Mode Current Control of Grid-Connected Three-Phase PWM Converters with LCL Filter,  IEEE International Symposium on Industrial Electronics 2010 - 04-07 July, Bari, Italien

Janssen, G., Waldschik, A., Büttgenbach, S., Ponick, B. (2010): Entwurf und Simulation eines rotatorischen Mikroreluktanzschrittmotors, Innovative Klein- und Mikroantriebstechnik,  124, 8.ETG/GMM-Fachtagung am 23. September in Würzburg, VDE Verlag GmbH Berlin, ISBN 978-3-8007-3301-9, 2010, S.93-98

Jastrzembski, Ponick (2010): Different Methods for Reducing Detent Force in a Permanent Magnet Linear Synchronous Motor,  IECON 2010, Phoenix, Arizona (USA)

Jastrzembski, Ponick (2010): Diffrent Methods for Reducing Detent Force in a Permanent Magnet Linear Synchronous Motor,  IECON 2010, Phoenix, Arizona (USA)

Köneke, T.; Merkert, A.; Mertens, A. (2010): System based optimization of the chip size and the thermal path for Si and SiC semiconductors ,  6th International Conference on Integrated Power Electronic Systems, Nürnberg

Kriese, Wittek, Tischmacher, Gattermann (2010): Prediction of Motor Bearing Currents for Converter Operation,  ICEM 2010, Rome (Italy)

R. Helmer, P. Dück, B. Ponick (2010): Determination of Transient Reactances of Salient Pole Synchronous Machines with Analytical and Numerical Methods. ,  Speedam 2010, Pisa, Italy

Rüger, Schnick, Mertens, Mathis (2010): Novel PWM Modulation Strategy for 3-phase Inverters with Reduced Distortion at Low Switching Frequency,  IECON 2010, Phoenix, Arizona (USA)

Stübig, C. ; Ponick, B. (2010): Berechnung von Hybridschrittmotoren,  8. ETG/GMM-Fachtagung Innovative Klein- und Mikroantriebstechnik, Würzburg, 23. September 2010

Tischmacher, Gattermann, Kriese, Wittek (2010): Bearing Wear Caused by Converter-Induced Bearing Currents ,  IECON 2010, Phoenix, Arizona (USA)

Averberg, A.; Meyer, K.R.; Mertens, A. (2009): Design Considerations of a Current-fed DC-DC Converter with High Voltage Gain for Fuel Cell Applications,,  EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009

Froböse, Jastrzembski, Overmeyer, Ponick (2009): Modellierung eines Lineardirektantriebes für Transportbänder,  WGTL-Kolloqium 2009, Illmenau

Jastrzembski, Froböse, Ponick, Overmeyer (2009): Direktantrieb eines Förderbandes durch einen permanentmagnet erregten Synchron-Linear-Motor,  ETG-Kongress 2009, Düsseldorf

Jastrzembski, Ponick (2009): Design of a Novel Direct Driven Conveyor by a Linear Synchronous Motor,  IECON 2009, Porto, Portugal

Kuhn, H.; Mertens, A. (2009): On-line Junction Temperature Measurement of IGBTs based on Temperature Sensitive Electrical Parameters,,  EPE 13th European Conference on Power Elektronics and Applications (EPE2009), Barcelona, Spain, 08.-10.09.2009

Ponick, B (2009): Miniaturisation of Electrical Machines,  ISTET'09, Lübeck, pp. 1-4

Ponick, B.; Jastrzembski, J.-P. (2009): Neuartiger Linear-Direktantrieb für Transportbänder,,  8. Technischer Tag der VEM-Gruppe, Wernigerode

Tegeler, S.; Helmer, R.; Ponick, B. (2009): Saturation Behaviour of Doubly-fed Induction Generators, ,  European Wind Energy Conference & Exhibition 2009, Parc Chanot, Marseille, France 16 – 19 March 2009

Waldschik, A.; Feldmann, M.; Wiedmann, K.; Janssen, G.; Ponick, B.; Mertens, A.; Büttgenbach, S. (2009): Funktionelle Komponenten für einen linearen Reluktanzschrittmotor,,  Mikrosystemtechnik-Kongress 2009, Berlin, 2009

Wiedmann, K.; Wallrapp, F.; Mertens, A. (2009): Analysis of Inverter Nonlinearity Effects on Sensorless Control for Permanent Magnet Machine Drives based on High-Frequency Signal Injection,,  EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009

Averberg, A.; Mertens, A. (2008): Characteristics of the Single Active Bridge Converter with Voltage Doubler

Averberg, A.; Meyer, K.R.; Mertens, A. (2008): Current-fed Full Bridge Converter for Fuel Cell Systems

Averberg, A.; Meyer, K.R.; Nguyen, C.Q., Mertens, A. (2008): A Survey of Converter Topologies for Fuel Cells in the kW Range

Garbe, E.; Helmer, R.; Ponick, B. (2008): Modelling and fast calculating the characteristics of synchronous machines with the finite element method

Helmer, R.; Wang, D.; Ponick, B. (2008): Investigation of Part Winding Start Used in Cage Induction Motors

Janssen, G., Traisigkhachol, O., Gatzen, H.H., Ponick, M.: (2008): Design and Fabrication of a Rotary Micro Synchronous Motor,  Proc. Actuator 2008, Bremen, Germany, pp. 457-460

Kuhn, H.; Koneke, T.; Mertens, A. (2008): Potential of digital gate units in high power applications ,  IEEE Power Electronics and Motion Control Conference (EPE-PEMC 2008), Poznan, Poland, 2008, page(s): 1458-1464

Kuhn, H.; Köneke, T.; Mertens, A. (2008): Considerations for a Digital Gate Unit in High Power Applications

Laczynski, T.; Mertens, A. (2008): Predictive stator current control for three-level voltage-source inverters with output LC-filters;,  EPE-PEMC 2008, Poznan, Polen, Page(s):569-575

Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulation Error Control for Medium Voltage Drives with LC-Filters and Synchronous Optimal Pulse Width Modulation,  IAS 2008, Edmonton, Kanada, Page(s): 1-7

Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulationsfehlerregelung für Mittelspannungsantriebe mit LC-Filtern und offline optimierter Pulsdauermodulation

Laczynski, T.; Werner, T.; Mertens, A. (2008): Energy-based modulation error control for high-power drives with output LC-filters and synchronous optimal pulse width modulation

Laczynski, T.; Werner, T.; Mertens, A. (2008): Active Damping of LC-Filters for High Power Drives using Synchronous Optimal Pulsewidth Modulation

Mertens, A.; Skudelny, H.-Ch. (2008): Switching Losses in a GTO Inverter for Induction Heating

Rüger, N.E.; Schnick, O.; Mathis, W.; Mertens, A. (2008): New Modulation Strategy with Low Switching Frequency and Minimum Baseband Distortion

Schnick, O. ; Rüger, N. E. ; Mertens, A. ; Mathis, W. (2008): New Modulation Strategy for Controlled Power Electronic Applications with Low Switching Frequencies

Stuebig, C.; Ponick, B. (2008): Determination of Air Gap Permeances of Hybrid Stepping Motors for Calculation of Motor Behaviour 18th International Conference on Electrical Machines (ICEM), Vilamoura, Portugal, 06.-09.09.2008

Zacharias, P.; Menezes, L.M.; Friebe, J. (2008): 2 New Topologies for Transformerless Grid Connected PV-Systems with Minimum Switch Number,  PCIM 2008, Nürnberg, Germany, 27.-29.05.2008

Averberg, A.; Mertens, A. (2007): Design Considerations of a Voltage-fed Full Bridge DC-DC Converter with High Voltage Gain for Fuel Cell Applications

Averberg, A.; Mertens, A. (2007): Analysis of a Voltage-fed Full Bridge DC-DC Converter in Fuel Cell Systems

Demmig, S.; Gehrking R.; Wiedmann, K.; Ponick, B.; Mertens A. (2007): Positionsregelung eines elektromagnetischen Mikrolinearmotors

Demmig, S.; Gehrking, R.; Wiedmann, K.; Mertens, A.; Ponick, B. (2007): Design and Control of a Micro Linear Motor with Integrated Magnetic Guidance

Dempewolf, K.-H.; Getschmann, T.; Rüger, N.E.; Ganesan, V.A.; Mertens, A.; Ponick, B. (2007): Transiente Simulation eines Antriebssystems zur Bestimmung der frequenzabhängigen Verluste in schnelllaufenden permanentmagneterregten Synchronmaschinen

Dempewolf, K.-H.; Ponick, B. (2007): Modelling of Permanent Magnet Synchronous Machines for Simulations of Transient Phenomena

Gehrking R.; Demmig S.; Feldmann M.; Waldschi A.; Büttgenbach S.; Ponick B. (2007): Charakterisierung eines elektromagnetischen Mikrolinearmotors mit integrierter magnetischer Führung

Gehrking, R.; Demmig, S.; Mertens, A.; Ponick, B. (2007): Investigations on a Micro Linear Stepping Motor Supplied by a DC-DC Converter

Kuhn, H.; Rüger, N.E.; Mertens, A. (2007): Control Strategy for Multilevel Inverter with Non-ideal DC Sources

Laczynski, T.; Mertens, A. (2007): New Current Controller for Inverter Fed Medium Voltage Drives with LC Filter

Laczynski, T.; Mertens, A. (2007): Predictive Current Controller for Inverter Fed Medium Voltage Drives with LC Filter,  PEDS 2007, Bangkok, Thailand, Page(s): 1496-1501

Rüger, N.E.; Kuhn, H.; Mertens, A. (2007): Harmonic Distortion of Multicarrier PWM Strategies in Cascaded Multilevel Converters with Unequal DC Sources

Wiedmann, K; Demmig, S.; Mertens, A. (2007): Modified Sliding Mode Controller for Positioning of Micro Linear Motors

Demmig, S.; Gehrking, R.; Feldmann, M.; Büttgenbach, S.; Ponick, B. (2006): Specific Design Rules for Micro Linear Motors

Gatzen, H.H.; Hahn, M.; Bedenbecker, M.; Ponick, B.; Gehrking, R.; Demmig, S. (2006): Advances in the Development of a Linear Hybrid Micro Actuator

Gehrking, R.; Demmig, S.; Ponick, B.; Feldmann, M.; Büttgenbach, S. (2006): A Micro Linear Motor with Integrated Passive Magnetic Guidance

Pöhler, S.; Mertens, A.; Sommer, R. (2006): Optimisation of Output Filters for Inverter Fed Drives

Ruffert C.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2006): Magnetic Levitation Assisted Guide for a Linear Microactuator

Demmig, S.; Gehrking, R.; Mertens, A.; Ponick, B. (2005): Simulation of the magnetic and dynamical characteristics of micro linear motors

Gehrking, R.; Ruffert, C.; Demmig, S.; Gatzen, H.H.; Ponick, B. (2005): Entwicklung einer magnetischen Führung für Mikroaktoren

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Auslegung aktiver Mikrosysteme

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design of active micro systems

Jacobs, J.; Averberg, A.; De Doncker, R. (2005): Multi-Phase Series Resonant DC-to-DC Converters: Stationary Investigations

Jacobs, J.; Averberg, A.; Schröder, S.; De Doncker, R. (2005): Multi-Phase Series Resonant DC-to-DC Converters: Transient Investigations

Mertens, A.; Ganesan, V. (2005): Three-Phase Sigma-Delta Modulation using Zero-Sequencs Components

Bartram, M.; Schrey, M.; Kuhn, H.; De Doncker, R.W. (2004): A new approach to optimize IGBT-heatspreader-combinations allows "real-time" simulation of IGBT-chip-temperature

Budde, T.; Hahn, M.; Föhse, M.; Edler, J., Stölting, H.-D.; Gatzen, H.H. (2004): Design, Fabrication and Characterization of a Hybrid Linear Micro Step Motor

Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2004): Design and Simulation of essential Parts of active Microsystems

Gatzen, H.H; Stölting, H.-D.; Ponick, B. (2004): Alternatives for Micro-Machined Linear Actuators

Jacobs, J.; Averberg, A.; De Doncker, R. (2004): A novel three-phase DC/DC converter for high-power applications

Stölting, H-D.; Hesselbach, J.; Becker, O.; Berardinelli, A.; Rathmann S. (2004): Robuste modellbasierte Regelung von Mikro-Reluktanzmotoren

Brune, K.; Seinsch, H.O.; Steinbrink, J. (2003): Conducted emission of synchronous generators and its dependence on design features,  Electrical Engineering, vol. 85, pp. 71-81

Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2003): Entwurf und Simulation aktiver Mikrosysteme

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2003): A Batch Fabricated Linear Synchronous Motor

Klug, R.-D.; Mertens, A. (2003): Reliability of Megawatt Drive Concepts

Seidemann, V.; Edler, J.; Büttgenbach, S.; Stölting, H.-D. (2003): Linear Variable Reluctance (VR) Micro Motor with Horizontal Flux Guidance

Altenbernd, G. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design

Altenbernd, G.; Wähner, L. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design

Edler, J.; Föhse, M.; Gatzen, H.H.; Stölting, H.-D. (2002): Ein Antriebsteil für aktive Mikrosysteme

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Design, Fabrication, and Characterization of a Miniature Linear Induction Motor

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Investigations on the Pole Geometry Optimization of a Variable Reluctance Microactuator

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): A Batch Fabricated Linear Synchronous Motor

Altenbernd, G. (2001): Kleine Asynchron-/Synchronmaschinen in der Kfz-Technik

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H. H. (2001): A Linear Microactuator with Enhanced Design

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H (2001): Elektromagnetischer Mikrolinearmotor

Jacob, A. (2001): Hybridmotor: Anwendung, Aufbau, Wirkungsweise und Berechnung

Mertens, A.; Sommer, R.; Schmitt, B.P. (2001): “Retrofit of fixed speed induction motors with medium voltage drive converters using NPC three-level inverter high-voltage IGBT based topology

Seinsch, H.O. (2001): Maßnahmen zur Unterdrückung von Lagerströmen in umrichtergespeisten Induktionsmotoren

Seinsch, H.O. (2001): Methoden der Motordiagnose

Stölting, H.-D. (2001): Mechatronik, der Motor für Innovationen in der Klein- und Mikroantriebstechnik

Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Present Stage of Development of the Vector Controlled Crankshaft Starter-Generator for Motor-Vehicle

Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Vector Controlled Crankshaft Starter-Generator for Motor Vehicle

Gatzen, H. H.; Stölting, H.-D.; Büttgenbach, S.; Dimigen, H. (2000): A Novel Variable Reluctance Micromotor for Linear Actuation

Hausberg, V.; Seinsch, H.O. (2000): Wellenspannungen und zirkulierende Lagerströme bei umrichtergespeisten Induktionsmaschinen,  Electrical Engineering, vol. 82, pp. 313-326

Hausberg, V.; Seinsch, H.O. (2000): Schutzmaßnahmen gegen Lagerschäden umrichtergespeister Motoren,  Electrical Engineering, vol. 82, no. 6, pp. 339-345

Kleen, S.; Ehrfeld, W.; Michel, F.; Stölting, H.-D. (2000): Penny-Motor: A Family of Novel Ultraflat Electromagnetic Micromotors

Mertens, A.; Sommer, R.; Brunotte, C. (2000): Applications of Medium Voltage Drives with IGBT Three-Level Inverters

Sommer, R.; Mertens, A.; Brunotte, C.; Trauth, G. (2000): Medium Voltage Drive System with NPC Three-Level Inverter using IGBTs

Sommer, R.; Mertens, A.; Klaassen, N. (2000): Three-level Medium Voltage Inverter using IGBTs

Stölting, H.D. (2000): Small Electromagnetic Disk Drives

de Wit, B.; Kleiner, F.; Ponick, B. (1999): PCIC 1999 (General Session) und IEEE IAS 2000

Mertens, A.; Bruckmann, M.; Sommer, R. (1999): Medium Voltage Inverter using High Voltage IGBTs

Sommer, R.; Mertens, A.; Griggs, M.; Conraths, H.-J.; Bruckmann, M.; Greif, T. (1999): New Medium Voltage Drive Systems using Three-Level Neutral Point Clamped Inverter with High Voltage IGBT

Bakran, M.; Marquardt, R.; Mertens, A.; Winternheimer, S. (1997): A Novel System for Current and Voltage Sensing in Traction Converters

Mertens, A.; Eckardt, D. (1996): Voltage and Current Sensing in Power Electronic Converters using Sigma-Delta A/D Conversion

Mödl, S.; Mertens, A.; Eckardt, D.; Hauer, H. (1996): 14 bit Sigma Delta Modulator with Mulit Bit Feedback

Mertens, A. (1992): Performance Analysis of Three Phase Inverters controlled by Synchronous Delta-Modulation Systems

Mertens, A. (1991): Design of a 20 kVA Resonant DC Link IGBT Inverter on the Base of Experimental Device Evaluation

Mertens, A.; Skudelny, H.-Ch. (1991): Calculations on the Spectral Performance of Discrete Pulse Modulation Strategies

Mertens, A.; Skudelny, H.-Ch.; Caldeira, P.; Lipo, T. A. (1991): Characterization of GTOs under different Modes of Zero Current Switching

Venkataramanan, G.; Mertens, A.; Skudelny, H.-Ch.; Grüning, H. (1991): Switching Characteristics of Field Controlled Thyristors

Mertens, A.; Divan, D.M. (1990): A High Frequency Resonant DC Link Inverter using IGBTs

Mertens, A.; Skudelny, H.-Ch. (1989): Operation and Control Requirements for a GTO used in a Parallel Resonant Inverter for Induction Heating

Mertens, A.; Skudelny, H.-Ch. (1989): Switching Losses in a GTO Inverter for Induction Heating

Helmer, R.; Ponick, B.; Steinbrink, J.; England, M. (2022): Rotor mit Kavitäten, Elektromaschine und Kraftfahrzeug, Patent Nr. DE102020214207A1

Lorenz, M.; Kucka J.; Mertens, A (2021): Modularer Multilevel-Umrichter, Verfahren zum Betrieb von modularen Multilevel-Umrichtern und Computerprogramm, Nummer DE102020108034B3

Lorenz, M.; Kucka J.; Mertens, A (2021): Modularer Multilevel-Umrichter, Verfahren zum Betrieb von modularen Multilevel-Umrichtern und Computerprogramm, Nummer DE102020108035B3

Friebe, J.; Buchhold, S.; Söderberg, T.; Möser, E.; Wappler, T.; Kotthaus, M. (2020): Wechselrichter mit mindestens zwei Gleichspannungsquellen, DE102018127130A1

Friebe, J.; Buchhold, S.; Söderberg, T.; Möser, E.; Wappler, T.; Kotthaus, M. (2020): Wechselrichter mit mindestens zwei Gleichspannungswandlern und Verwendung eines solchen Wechselrichters in einer Photovoltaikanlage, DE102018127132A1

Buchhold, S.; Friebe, J.; Kotthaus, M.; Möser, E.; Söderberg, T.; Wappler, T. (2019): Photovoltaic System and Inverter having a Communication Interface, WO2019/110717A1

Buchhold, S.; Soederberg, T.; Friebe, J.; Kotthaus, M.; Wappler, T.; Moeser, E. (2019): Wechselrichter, WO2019/115403A1

Friebe, J. (2019): Wechselrichter und Verfahren zum Betreiben eines Wechselrichters, DE102017123815A1

Friebe, J. (2019): LC-Filteranordnung und elektrisches oder elektronisches Gerät mit einer derartigen LC-Filteranordnung, DE 10 2017 131 045 A1

Friebe, J.; Prior, O. (2019): Vorrichtung mit einer elektrischen Einrichtung, leistungselektronischer Wandler und Verfahren zur Verbesserung einer elektromagnetischen Verträglichkeit einer elektrischen Einrichtung, DE102017131295A1

Friebe, J.; Prior, O.; Wappler, T. (2019): Schaltungsanordnung und leistungselektronische Wandlerschaltung, DE102017125548A1

Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B.; Wittenstein SE (2019): Linearer Antrieb für ein Förderband, 20 2019 104 718.6

Brune, A.; Brune, K.; Ponick, B. ; Selke, C. ; Steinbrink, J. ; Weber, J.-N. (2018): Energieübertragungseinrichtung, Verfahren zum Herstellen einer Energieübertragungseinrichtung sowie elektrische Maschine,  DE102016008590A1

Friebe, J. (2018): Coil and Electrical or Electronic Device having such a Coil, WO2018228736A1

Friebe, J.; Müller, B.; Putz, M. (2018): Wechselrichter mit Netztrennstelle und Isolationswiderstandsmessung sowie Verfahren zur Messung eines Isolationswiderstandes, EP3394948

Breuninger J.; Ebrahimi A.; Hochberg C.; Lefint J.; Riehs Ch.; Rogge T. (2017): Vorrichtung zur Bewegungsunterstützung eines menschlichen Schultergelenkes,  WO002017093298A1

Feisel, M.; Friebe, J.; Rigbers, K. (2017): Shuntstrommessung für Multistringgeräte und Interleavingwandler,  DE102012100477C5

Friebe, J.; Lahnor, P.; Prior, O. (2017): Potentialverschiebende Halbbrücke, Polwender und blindleistungsfähiger Wechselrichter sowie Polwendeverfahren,  DE102015113071A1

Friebe, J.; Lahnor, P.; Prior, O. (2017): Polwender und blindleistungsfähiger Wechselrichter sowie Polwendeverfahren,  WO002017025490A1

Friebe, J.; Mallwitz, R.; Zacharias, P. (2017): Wechselrichter in Brückenschaltung mit langsam und schnell getakteten Schaltern,  EP000002136465B1

Friebe, J.; Mueller, B.; Putz, M. (2017): Wechselrichter mit Netztrennstelle und Isolationswiderstandsmessung sowie Verfahren zur Messung eines Isolationswiderstandes,  DE102015122636B4

Friebe, J.; Prior, O.; Wappler, T. (2017): Wechselrichter und Steuerverfahren für einen Wechselrichter,  DE102017106224A1

Mertens, A. (2017): Verfahren zum Betrieb eines modularen Multilevel-Stromrichters, modularer Multilevel-Stromrichter sowie Computerprogramm,  DE102015116271A1

Brune, K.; Possen, M.; Brune, A.; Steinbrink, J.; Weber, J.-N.; Selke, C.; Ponick, B. (2016): Energieübertragungseinrichtung,  DE102015007586A1

Denkana, B.; Ponick, B. (2016): Arbeitsspindel und Verfahren zum Betreiben einer Arbeitsspindel,  DE102006042539C5

Bieniek, S.; Friebe, J. (2015): Sicherheitseinrichtung für eine Photovoltaikanlage und Verfahren zum Betreiben einer Sicherheitseinrichtung für eine Photovoltaikanlage,  DE102011053524B4

Friebe, J.; Leifert, T. (2015): Photovoltaische Anlagenkomponente und Verfahren zur Veränderung eines Betriebszustandes derselben,  DE102013107606A1

Friebe, J.; Leifert, T.; Müller, B. (2015): Bidirektionaler Wandler mit Vorzugsrichtung und blindleistungsfähige Wechselrichter mit diesem Wandler,  DE102014113306A1

Friebe, J.; Leifert, T.; Oldenkamp, H. (2015): Wechselrichter sowie Verfahren zum Betrieb eines Wechselrichters,  DE102014101571B4

Brune, A. ; Gröninger, M. ; Horch, F. ; Juris, P. ; Kock, A. ; Pleteit, H.; Ponick, B. ; Schmidt, D. ; Wöstmann, F.-J. (2014): Spule und Verfahren zur Herstellung einer Spule,  DE102013204047A1

Friebe, J. (2014): Verfahren und Vorrichtung zur Überwachung und Strommessung an einer magnetisch vorgespannten Drossel,  DE102013104402A1

Friebe, J.; Lederer, S.; Rigbers, K. (2014): Gleichspannungswandler und Verfahren zum Betreiben eines Gleichspannungswandlers und Wechselrichter mit einem ,  WO002014019946A2

Friebe, J.; Leifert, T. (2014): Wechselrichter, insbesondere für Photovoltaikanlagen,  DE202014100379U1

Friebe, J.; Prior, O. (2014): Verfahren zum Betreiben eines blindleistungsfähigen Wechselrichters mit Polwender und blindleistungsfähiger Wechselrichter mit Polwender,  DE102014102000B3

Friebe, J.; Rigbers, K.; Viotto, M.; Zacharias, P. (2014): Drossel mit dynamischer Vormagnetisierung,  DE102011000980B4

Friebe, J.; Söderberg, T. (2014): Elektronische Baugruppe,  DE102012106615A1

Blanz, J.; Friebe, J.; Stevens, S.; Wachenfeld, V. (2013): Bereitstellung von Regelleistung mit einer Photovoltaikanlage,  DE102011054971A1

Busse, C,; Daur, P.-C.; Mertens, A.; Werner, T. (2013): Verfahren und Vorrichtung zur Bestimmung einer Sperrschichttemperatur eines Halbleiterbauelements,  DE102012006009A1

Friebe, J.; Müller, B. (2013): Brückenschaltungsanordnung und Betriebsverfahren für einen Spannungswandler und Spannungswandler,  DE102011051482A1

Friebe, J.; Nöding, C.; Rigbers, K.; Sahan, B.; Scarpa, V.; Vasconcelos Araújo, S.; Zacharias, P. (2013): Wechselrichterschaltung,  DE102012107122A1

Hopf, M.; Friebe, J. (2013): Schutzeinrichtung für eine Photovoltaikanlage, Photovoltaikmodul mit einer solchen Schutzeinrichtung sowie Betriebsverfahren für eine solche Schutzeinrichtung,  DE102011000737B4

Friebe, J. (2012): Leistungszirkulation in Interleavingwandlern,  DE102012100494A1

Friebe, J.; Rigbers, K. (2012): Leistungselektronische Wandlerstufe,  Patentschrift: DE102010060687A1

Friebe, J; Prior, O.; Zacharias, P. (2012): Vormagnetisierte AC-Drossel mit Polwender,  DE102011001147A1

Froböse, T. ; Jastrzembski, J.-P. ; Overmeyer, L.; Ponick, B. (2012): Antrieb eines Förderers durch einen Linearmotor,  DE102011016039A1

Mertens, A.; Ponick, B.; Tegeler, S.; Wiedmann, K. (2012): Biegeaktor und Endoskop mit einem Biegeaktor,  DE102010012417B4

Ponick, B.; Rauch, H.; Utecht, M. (2012): Großer Synchronmotor mit veränderbarer Drehzahl,  DE000019731313B4

Baruschka, L.; Mertens, A. (2011): Transformatorloser Direktumrichter,  DE102010013862A1

Froböse, T.; Jastrzembski, J.-P.; Overmeyer, L.; Ponick, B. (2011): Antrieb eines Förderers durch einen Linearmotor,  DE 1020 110 16 039 A1

Ponick, B. (2011): Elektrische Maschine und Verfahren zur Herstellung einer elektrischen Maschine,  DE102009038761A1

Friebe, J.; Prior, O. (2010): Elektrische Schaltung mit selbstleitendem Halbleiterschalter ,  EP000002202884B1

Friebe, J.; Prior, O. (2010): Wandler mit mindestens einem selbtsleitenden Schalter,  WO002010034785A1

Blumenstein, F.; Friebe, J.; Gerlach, A.-K.; Scheuermann, J.; Zacharias, P.; Zinn, M. (2009): Wechselrichter,  DE102007038960A1

Mertens, A.; Neeser, G. (2009): Verfahren zum Erkennen eines Störfalles "Rotating Stall" bei einem umrichtergespeisten Verdichter,  DE102007035712B4

Kern, U.; Pöhler, S.; Seinsch, H.O. (2008): Verfahren zur Wiederzuschaltung eines Drehstrommotors und elektrische Schaltung zur Durchführung des Verfahrens,  DE102007011510A1

Kuhn, H. ; Mertens, A.; Rüger, N. (2008): Mehrstufiger Spannungsumrichter und Verfahren zu Ansteuerung hierzu,  DE102007014597A1

Mertens, A.; Neeser, G. (2008): Ausgangsfilter für einen gepulsten Stromrichter,  DE102005019215B4

Klug, R.-D.; Mertens, A. (2007): Hybrides Filter,  DE102006009046A1

Kahlen, K.; Mertens, A; Schierling, H. (2006): Antriebssystem,  DE102005004141A1

Mertens, A; Neeser, G. (2006): Verfahren zum Betrieb eines stromrichtergespeisten Verdichters,  DE102004060206B3

Lange, J. ; Möhle, A. ; Ponick, B. ; Vogel, R. (2004): Elektrische Maschine bzw. Schiffsantriebssystem,  DE000010304276A1

Hofmann H.; Kutzner R.; Steinbrink J. (2001): Method for Limiting an Electric Current Passing through an Electrical Component and Limiting Device,  R102001074905A

Hofmann H.; Kutzner R.; Steinbrink J. (2000): Verfahren zur Begrenzung eines elektrischen Stroms durch ein elektrisches Bauteil und Begrenzungsvorrichtung,  WO002000013304A1

Ponick, B. ; Rauch, H. ; Utecht, M. (2000): Zweipolige elektrische Synchronmaschine mit liegendem Rotor und Verfahren zur Einstellung der Amplituden von Resonanzschwingungen doppelter Drehfrequenz an einer solchen Synchronmaschine,  DE000019832708C2

Steinbrink J. (2000): Leiteranordnung mit einer Mehrzahl von elektrischen Leitern zur Stromzuführung und zur Stromabführung zu einer Wicklungsanordnung,  WO002000033442A1

Eckardt D.; Mertens A. (1998): Integrierender Analog-Digital-Umsetzer,  EP000000675604B1

Bakran, M.-M.; Marquardt, R.; Mertens, A. (1997): Digitales Datenübertragungssystem,  DE000019548099A1

Bruckmann M.; Mertebs A. (1997): Verlustarmer Leistungs-Wechselrichter,  DE000019536470A1

Seinsch, H.O. (1990): Elektrische Meßeinrichtung,  DE000003600814C2

Seinsch, H.O. (1986): Gleichstrom-durchflossene Ringwicklung für einen Asynchrongenerator,  DE000003316833C2

Seinsch, H.O. (1982): Verfahren zur meßtechnischen Erfassung und Überwachung von elektrischen Läuferunsymmetrien in Induktionsmaschinen mit Käfigläufern,  DE000002921724C2

Seinsch, H.O. (1977): Schallschutzhaube fuer elektrische Maschinen Mit Oberflaechenkuehlung,  DE000002000236B2

Huhn J.; Juergen D.; Seinsch H.O. (1970): Einrichtung zur Geraeuschminderung roehrengekuehlter elektrischer Maschinen,  DE000001638183A

Heide, D.; Bagaber, B.; Mertens, A.; Ponick, B. (2023): Abschlussbericht SkyPower100 - Pilotanlage zur Energieerzeugung aus Höhenwind, TIB

Denkena, B.; Teige, C.; Königsberg, J.; Ponick, B. (2021): Hybride Spindel: Prozessabhängige Einstellung der Spindeldynamik zur Produktivitätssteigerung in der spanenden Bearbeitung, AiF / FGW, https://www.fgw.de/wp-content/uploads/IGF_19590N_HSP_Internetveroeffentlichung_Hybride_Spindel.pdf

Heide, D. (2021): Electrical Machine Design for an All-Automatic Ground Generator Airborne Wind Energy System, WESC 2021 (Wind Energy Science Conference), 25.–28. Mai 2021, Hannover

Fauth, L.; Schefer, H.; Kopp, T.; Mallwitz, R.; Friebe, J.; Kurrat, M. (2020): Power Supply Systems for All Electric Aircraft, Deutscher Luft- und Raumfahrtkongress 2020 (virtuell), 01.-03.09.2020

Knebusch, B. (2020): Elektrische Lagerbelastung - Lagerströme durch Betrieb am Frequenzumrichter, BENNING Fachtagung, 12.03.2020, Bocholt

Narjes, G.; Müller, J.K.; Kalla, M.; Mertens, A.; Ponick, B. (2020): Optimization of Integrated Compressor Drives for Electrically Powered High-Lift Systems, Buchtitel: Fundamentals of High Lift for Future Civil Aircraft (Springer-Verlag), Contributions to the Final Symposium of the Collaborative Research Center 880, 17.-18.12.2019, Braunschweig

Friebe, J. (2019): Freiheitsgrade und Forschungsaspekte in der Elektrifizierung von Flugzeugen, EFZN-Forschungstag, 19.02.2019, Braunschweig

Friebe, J.; Fauth, L.; Knebusch, B. (2019): Spannungsbelastung magnetischer Bauelemente durch WBG-Leistungshalbleiter, ZVEI Jahrestagung 2019 der Fachverbände Transformatoren & Stromversorgungen sowie Electrical Winding & Insulation Systems, 26.03.-27.03.2019, Nürnberg-Boxdorf

Friebe, J.; Mertens, A. (2019): Power Electronics in Decentralized Systems and Microgrids, Segundo seminaro - Sistemas Energeticos de Pequena Escala, Universidad de Chile, Santiago, Chile, 13.12.2019

Rüberg, S.; Sewdien, V.; Rueda Torres, J. L.; Rakhshani, E.; Wang, D.; Tuinema, B.; Farrokhseresht, N.; Gusain, D.; Perilla, A.; Mola Jimenez, J. ; Longas Viejo, C.; Breithaupt, T.; Goudarzi, F.; Meyer, R.; Stallmann, F.; Herrmann, M.; Hofmann, L.; Mertens, A.; Hennig, T.; Val Escudero, M.; Kilter, J.; Prevost, T.; Denis, G. (2019): "Demonstration of Mitigation Measures and Clarification of Unclear Grid Code Requirements, Projekt: Massive Integration of Power Electronic Devices "

Bartschat, A.; Broer, C.; Coronado, D.; Fischer, K.; Kucka, J.; Mertens, A.; Meyer, R.; Moriße, M.; Pelka, K.; Tegtmeier, B.; Weber, S.; Wenske, J. (2018): Zuverlässige Leistungselektronik für Windenergieanlagen, Projektbericht, 144 Seiten, ISBN: 978-3-8396-1326-9 (2018)

Friebe, J.; Führer, O. (2017): Optimierte Aufbau- und Verbindungstechnik für Photovoltaik-Wechselrichter – Teilvorhaben,  Hochfrequenz-Kompaktwechselrichter für vollautomatisierte Fertigungsprozesse, Niestetal, Germany, Mai 2017

Friebe, J.; Lahnor, P. (2017): AC-Solarmodule - ganz einfach,  S Print Prior Art Journal 2017 #17, Pages: 255-261, August 2017

Merkert, A.; Müller, J.; Mertens. A. (2017): Design eines SiC-Wechselrichters mit DC-DC-Wandler für Hybridfahrzeuge. E-MOTIVE Expertenforum Hannover 2017

Mertens. A.; Ponick, B. (2017): Elektroantriebe für Fahrzeuge - Aktuelle Forschung und Trends. E-MOTIVE Expertenforum Hannover 2017

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger Verkehrsflugzeuge, E-MOTIVE Expertenforum Hannover, 2017

Steinbrink, J. (2017): Ausnutzungssteigerung von PMSM durch Nutzung von orientierungsprofilierten Magneten,  25. Kleinmaschinenkolloquium, 16.-17.03.2017, Ilmenau

Steinbrink, J.; Weickhmann, J. M. (2017): Optimisation of Magnets for Motor Design Using Field Shaping,  UK Magnetics Society, 4.-5. 10. 2017, Hanau

Breithaupt, T.; Herwig, D.; Hofmann, L.; Mertens, A.; Meyer, R.; Farrokhseresht, N.; Sewdien, V.; Tuinema, B.; Wang, D.; Rueda Torres, J.; Rüberg, S. (2016): Report on Systemic Issues ,  Projekt: Massive Integration of Power Electronic Devices

Friebe, J.; Rigbers, K. (2016): GaN-Transistoren – Potentiale und Anforderungen am Beispiel von PV-Wechselrichtern,  ETG-Workshop Schaltungstechnik für GaN-Bauelemente in der Leistungselektronik, Nürnberg, Germany, 07.03.2016

Ebrahimi, A. (2014): Antriebstechnik in der Medizin- und Rehabilitationstechnik,  In: Verl, Alexander (Hrsg.) u.a.; Stuttgarter Produktionsakademie: Antriebstechnik in der Medizin- und Rehabilitationstechnik: Seminar, 2014

Friebe, J. (2014): Stand der Technik und Trends bei Leistungselektronik für PV-Wechselrichter,  Vortrag im Rahmen der Vortragsreihe der SRT-Freunde Darmstadt, Germany, 24.10.2014

Janssen, G., Gehrking, R.,Edler, J., Ponick, B.,Stölting, H.D. (2011): Electromagnetic Design of Microactuators, Design and Manufacturing of Active Microsystems,  Springer Verlag Heidelberg Dordrecht London New York, ISBN978-3-642-12902-5, Part 1, 11-28

Janssen, G., Ponick, B. (2011): Kleine Motoren, große Möglichkeiten, Nano- und Quantenengineering,  Unimagazin 01/02, H12467,Zeitschrift der Leibniz Universität Hannover, S.32-34

R. Helmer; K. Reichert (2008): Dimensionierung von PM-Maschinen, Allgemeines und mit FEMAG

Harms, H.-F., Schoon, J., Janssen, G. (2006): Störspannungen an Betriebsempfangsantennenanlagen – Suche nach einer Störquelle,  Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 7.-9. März 2006 in Düsseldorf, VDE Verlag GmbH, Berlin Offenbach, S.735-742

Janssen, G. (2006): Mikroaktoren in großer Vielfalt,  Jahresbericht, Institut für Antriebssysteme und Leistungselektronik, Hannover, S.10-11

Steinbrink, J. (2006): Kraftwirlungen in permanentmagneterregten Maschinen