Publikationen


Buchbeiträge

  • Dokus, M. (2023): Analysis of the Interoperability of Power-Electronic-Based Grid Converters, Dissertation, TEWISS Verlag ISBN 978-3-95900-848-8
  • Gerlach, M. (2023): Einfluss von Wicklung und Isolierung auf das Schwingungsverhalten elektrischer Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-798-6
  • Herwig, D. (2023): Applying Temperature-Sensitive Electrical Parameters to SiC Power Modules Considering Parasitic Effects, Dissertation, Repositorium der LUH, OnlineRess:/DOI: https://doi.org/10.15488/15128
  • Hoffmann, A. (2023): Electric Potential Distribution in Three-Phase Windings under Pulse Voltage Stress, Dissertation, TEWISS Verlag ISBN 978-3-95900-852-5
  • Kaiser, R. (2023): Gegenüberstellung der Materialeinzelkosten und der Verlustenergie im Fahrzyklus von Induktionsmaschinen mittels analytisch-numerisch-gekoppelter Methoden, Dissertation, TEWISS Verlag ISBN 978-3-95900-881-5
  • Karimi, R. (2023): Design and Control of a Multiphase Interleaving DC-DC Converter with Loss Optimizing Operating Strategies for Electric Vehicles, Dissertation, Repositorium der LUH, OnlineRess:/DOI: https://doi.org/10.15488/15541
  • Königsberg, J. (2023): Untersuchung eines vollintegrierten Aktorsystems zur Verringerung von Ratterschwingungen, Dissertation, TEWISS Verlag ISBN 978-3-95900-882-2
  • Sommer, C. (2023): Analysis and Comparison of Single- and Three-Phase Single Active Bridge Converters for Multi-kW Applications, Dissertation, TEWISS Verlag ISBN 978-3-95900-824-2
  • Fricke, T. (2022): Compression System Losses in Large Salient Pole Synchronous Machines, Dissertation, TEWISS Verlag ISBN 978-3-95900-776-4
  • Haschen, E. (2022): Transiente Simulation elektrisch erregter Synchronmaschinen mit Parameterfindung durch magnetische Ersatznetzwerke, Dissertation, TEWISS Verlag ISBN 978-3-95900-686-6
  • Lücke, S. (2022): Regelung von Induktionsmaschinen im gesamten Drezahlbereich ohne Gebersystem, Dissertation, TEWISS Verlag ISBN 978-3-95900-692-7
  • Movagharnejad, H. (2022): Wireless Power Transfer for Battery Charging Application of Electric Vehicles, Dissertation, TEWISS Verlag ISBN 978-3-95900-716-0
  • Udema, S. (2022): Elektrisch erregte Synchronmaschine mit kontaktlosem induktivem Übertragungssystem ohne zusätzlichen Wechselrichter, Dissertation, TEWISS Verlag ISBN 978-3-95900-740-5
  • Andresen, J. (2021): Aktive Geräuschunterdrückung in einer permanentmagneterregten Synchronmaschine mit Hilfe von Stromoberschwingungen, Dissertation, TEWISS Verlag ISBN 978-3-95900-639-2
  • Buchali, T. (2021): Electric Five-Phase Actuators in Steering Systems for Autonomous Driving, Dissertation, Shaker Verlag ISBN 978-3-8440-8314-9, Mahle Schriftenreihe
  • Müller, J.-K. (2021): Untersuchungen zu Ausgangsfiltern in Siliziumcarbid-Antriebswechselrichtern, Dissertation, TEWISS Verlag ISBN 978-3-95900-525-8
  • Quattrone, F. (2021): Elektromagnetische Gestaltung permanentmagneterregter Synchronmaschinen für den geberlos geregelten Betrieb im gesamten Drehzahlbereich, Dissertation, TEWISS Verlag ISBN 978-3-95900-655-2
  • Rosen, A. (2021): Modellierung und Regelung fehlertoleranter Antriebe mit permanentmagneterregten Synchronmaschinen für Elektrofahrzeuge, Dissertation, TEWISS Verlag ISBN 978-3-95900-571-5
  • Stockbrügger, J. O. (2021): Analytische Bestimmung parasitärer Kapazitäten in elektrischen Maschinen, Dissertation, Repositorium der LUH, OnlineRess: DOI: https://doi.org/10.15488/11154
  • Urbanek, S. (2021): Gestaltung von Rotoren permanentmagneterregter Synchronmaschinen für die metalladditive Fertigung, Dissertation, TEWISS Verlag ISBN 978-3-95900-618-7
  • Vip, S.-A. (2021): Zeiteffiziente Berechnung der Magnetgeräusche drehzahlvariabler elektrischer Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-534-0
  • Wohlers, C. (2021): Permanenterregte Synchronmaschinen hoher Drehmomentdichte, Dissertation, TEWISS Verlag ISBN 978-3-95900-587-6
  • Zulk, S. (2021): Optimierung eines einphasigen PFC-Gleichrichters mit Wide-Bandgap-Leistungshalbleitern auf Basis domänenübergreifender Modelle, Dissertation, Repositorium der LUH, OnlineRess: DOI: https://doi.org/10.15488/10513
  • Boseniuk, F. (2020): Parametrisierung von thermischen Modellen für permanentmagneterregte Synchronmaschinen mittels experimenteller Identifikationsmethoden, Dissertation, TEWISS Verlag ISBN 978-3-95900-425-1
  • Ebrahimi, A. (2020): Advances in Modelling and control of Wind and Hydrogenerators, ISBN: 978-1-83880-533-3
  • Heseding, J. (2020): Baukastensysteme für den Antriebsstrang von Elektrofahrzeugen, Dissertation, TEWISS Verlag ISBN 978-3-95900-436-7
  • Jürgens, J. (2020): Elektrisch erregte Synchronmaschinen für unterschiedliche Antriebskonzepte in Elektrofahrzeugen, Dissertation, TEWISS Verlag ISBN 978-395900-466-4
  • Morisse, M. (2020): Über System- und Regelungsdynamiken von Windenergieanlagen und deren Einfluss auf die Umrichterlebensdauer, Dissertation, Repositorium der LUH, Online-Ress.: https://www.repo.uni-hannover.de/handle/123456789/9431
  • Oelkers, F. (2020): Fehlererkennung in Antriebssystemen mit permanentmagneterregten Synchronmaschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-417-9
  • Rehfeldt, A. (2020): Verbesserte Berechnung von Magnetfeldern und Ummagnetisierungsverlusten in elektrischen Maschinen, Dissertation, TEWISS Verlag ISBN 978-3-95900-519-7
  • Schroeder, H. (2020): Wicklungskopflose Turbogeneratoren mit Mehrphasentransformatoren, Dissertation, TEWISS Verlag ISBN 978-3-95900-510-4
  • Hackbart, M. (2019): Berechnung des Einflusses von Dämpferwicklung und massivem Läuferballen auf den Stoßkurzschluss von Turbogeneratoren, Dissertation, Isle Verlag, Ilmenau, ISBN: 978-3-938843-99-4
  • John, M. (2019): Frequency-Domain Modeling of Harmonic Interactions in Pulse-Width Modulated Voltage-Source Inverter Drives, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4705
  • Jonsky, T. (2019): Modellierung und Regelung von fünfphasigen Synchronmaschinen unter Berücksichtigung von Sättigungseffekten und Mehrfachanisotropien, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4778
  • Krone, T. (2019): Beiträge zu fehlertoleranten Fahrzeugantrieben mit Radnabenmotoren ohne Reibungsbremse, Dissertation, Repositorium der LUH, OnlineRess: https://doi.org/10.15488/4782
  • Kucka, J. (2019): Quasi-two-level PWM Operation of Modular Multilevel Converters: Implementation, Analysis and Application to Medium-Voltage Drives, Dissertation, Repositorium der LUH, OnlineRess: https://www.repo.uni-hannover.de/handle/123456789/4870
  • Bresemann, E.-M. (2018): Das Stirnraumfeld und sein Einfluss auf Schlingströme bei Schenkelpolsynchronmaschinen, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 3
    ISBN: ISBN: 978-3-959-00225-7
  • Brune, A. (2018): Elektrisch erregte Synchronmaschinen als Fahrantriebe, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 4, ISBN: 978-3-959-00241-7
  • Dörbaum, M. (2018): Gestaltung und Analyse elektromagnetischer Kippaktoren, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1014381304/Gestaltung-und-Analyse-elektromagnetischer-Kippaktoren/
  • Emmrich, J. (2018): Dimensionierung motorintegrierter elektromagnetischer Aktoren zur Dämpfung von Rotorschwingungen, Dissertation, Papierflieger Verlag
    ISBN: 978-3-869-48653-6
  • Juris, P. (2018): Elektrische Antriebssysteme mit sehr hoher Drehmomentdichte für Elektro- und Hybridflugzeuge, Dissertation, TEWISS Verlag, Berichte aus dem IAL, Band 2
    ISBN: ISBN 978-3-95900-221-9
  • Merkert, A. (2018): Untersuchungen zum Einsatz von Siliziumcarbid-Leistungshalbleitern in Traktionsantriebsumrichtern, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/datacite%3Adoi~10.15488%252F3258/Untersuchungen-zum-Einsatz-von-Siliziumcarbid-Leistungstransistoren/#documentinfo
  • Misir, O. (2018): Betriebsverhalten von Synchronmaschinen mit unsymmetrischer Ständerwicklung, Dissertation, Springer Vieweg Verlag, ISBN 978-3-658-21026-7; TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1012120805/Betriebsverhalten-von-Synchronmaschinen-mit-unsymmetrischer/
  • Müller-Deile, F. (2018): Modulare und skalierbare mehrsträngige Antriebssysteme für Elektrofahrzeuge, Dissertation, VDI-Fortschrittsbericht Nr. 418, Reihe 21, VDI-Verlag
    ISBN: 978-3-18-341821-3
  • Weber, B. (2018): Positionsgeberlose Regelung von permanentmagneterregten Synchronmaschinen bei kleinen Drehzahlen mit überabtastender Stromerfassung, Dissertation, TIB Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1016297955/Positionsgeberlose-Regelung-von-permanentmagneterregten/
  • Weber, J.-N. (2018): Berührungslose Übertrager für elektrisch erregte Synchronmaschinen, Dissertation, Tewiss Verlag, Berichte aus dem IAL, Band 1
    ISBN: 978-3-95900-193-9
  • Weber, S. (2018): Beitrag zur Zustandsüberwachung von IGBT-Modulen mit temperatursensitiven Parametern, Dissertation, TIB Hannover, Online-Ress.: https://www.repo.uni-hannover.de/handle/123456789/3769
  • Werner, T. (2018): Geberlose Rotorlagebestimmung in elektrischen Maschinen: Spannungsbasierte Verfahren für permanentmagneterregte Synchronmotoren, Dissertation, Springer Vieweg Verlag, ISBN 978-3-658-22270-3
  • Zhang, M. (2018): Doppelgeneratorsystem für Laufwasserkraftwerke : Untersuchung des dynamischen Verhaltens, der Regelung, des Energieertrags und der Wirtschaftlichkeit, Dissertation, Repositorium der LUH, OnlineRess:: https://www.repo.uni-hannover.de/handle/123456789/3607
  • Friebe, J.; Führer, O. (2017): Optimierte Aufbau- und Verbindungstechnik für Photovoltaik-Wechselrichter – Teilvorhaben, Hochfrequenz-Kompaktwechselrichter für vollautomatisierte Fertigungsprozesse, Niestetal, Germany, Mai 2017
  • Fuchs, F. (2017): Converter Control for Wind Turbines when Operating in Weak Grids containing Resonances, Dissertation, TIB Uni-Hannover, , Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1006264949/Converter-control-for-wind-turbines-when-operating/
  • Jung, M. (2017): Optimiertes multifunktionales bidirektionales Ladegerät für Elektrofahrzeuge, Dissertation, Fraunhofer Verlag, ISBN 978-3-8396-1193-7; TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/fraunhofer%3Aoai%253Afraunhofer.de%253AN-452659/Optimiertes-multifunktionales-bidirektionales-Ladeger%C3%A4t/
  • Karwatzki, D. (2017): Analyse und Regelung einer Klasse von modularen Multilevelumrichter-Topologien, Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A1002749247/Analyse-und-Regelung-einer-Klasse-von-modularen/
  • Koupený, J. (2017): Online-Parameter-Identifikation von geregelten Antriebssystemen mit Umricherspeisung, Dissertation, Papierflieger Verlag GmbH, ISBN 978-3-86948-575-1; TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A891203702/Online-Parameter-Identifikation-von-geregelten/
  • Tischmacher, H. (2017): Systemanalysen zur elektrischen Belastung von Wälzlagern bei umrichtergespeisten Elektromotoren, Dissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A887342701/Systemanalysen-zur-elektrischen-Belastung-von-W%C3%A4lzlagern/
  • Ebrahimi; A. (2016): Hybrid Analytical Modeling and Optimization of Surface Mounted Permanent Magnetic Synchronous Motors Considering Spatial Harmonics, Dissertation
    ISBN: 978-3-8440-5026-4
  • Junginger, C. (2016): Untersuchung der Stromverdrängung im Ständer hoch ausgenutzter Elektrischer Maschinen, Dissertation, Springer Verlag, AutoUni-Schriftenreihe, ISBN 978-3-658-17006-6;TIB Uni-Hannover Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A879406402/Untersuchung-der-Stromverdr%C3%A4ngung-im-St%C3%A4nder-hoch/
  • Tegeler, S. (2016): Erweiterung von analytischen Verfahren zur Berechnung von Ummagnetisierungsverlusten in Drehfeldmaschinen, Dissertation, Papierflieger Verlag GmbH, ISBN 978-3-86948-503-4
  • Braunisch, D. (2015): Kombinierte analytisch-numerische Berechnung der Magnetgeräusche elektrischer MaschinenDissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A831947675/Kombinierte-analytisch-numerische-Berechnung-der/
  • Garbe, E. (2015): Beeinflussung des Geräuschs von Induktionsmaschinen durch innovative Ständer- und LäufergeometrienDissertation, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A842127003/Beeinflussung-des-Ger%C3%A4uschs-von-Induktionsmaschinen/
  • Bostanci, E. (2014): Performance Analysis of Brushless DC Machines with Axially Displaceable RotorDissertation, AutoUni-Schriftenreihe, Band 64, Logos Verlag Berlin GmbH
  • Friebe, J. (2014): Permanentmagnetische Vormagnetisierung von Speicherdrosseln in StromrichternDissertation, Universität Kassel, Germany, Juni 2014
  • Jastrzembski, J.-P. (2014): Synchrone Linear-Direktantriebe für FörderbänderDissertation, VDI-Fortschrittsbericht Nr. 412, Reihe 21, Elektrotechnik, VDI-Verlag
  • Robert Meyer (2014): Fault-Ride-Through-Regelung von Windenergieanlagen mit Vollumrichter und LCL-NetzfilterDissertation, Leibniz Universität Hannover, TIB Uni-Hannover, Online-Ress.: https://www.tib.eu/de/suchen/id/TIBKAT%3A812759397/Fault-Ride-Through-Regelung-von-Windenergieanlagen/
  • Baruschka, L. (2013): Untersuchung des modularen Direktumrichters "Hexverter"Dissertationsschrift, Hannover
  • Dempewolf, K.-H. (2013): Modellierung des dynamischen Verhaltens permanentmagneterregter SynchronmaschinenDissertation, VDI-Fortschrittsbericht Nr. 407, Reihe 21, Elektrotechnik, VDI-Verlag
  • Veeh, C. (2013): Oberwellenorientierte Wicklungsmodifikation von permanentmagneterregten Synchronmaschinen mit ZahnspulenwicklungDissertation, VDI-Fortschrittsbericht Nr. 408, Reihe 21, Elektrotechnik, VDI-Verlag
  • Cornelia Stübig (2012): Effiziente Berechnungsverfahren für HybridschrittmotorenDissertation, VDI-Fortschrittsbericht Nr. 400, Reihe 21, Elektrotechnik, VDI-Verlag
  • Rüger, N. (2012): Zur Anwendung eines bandseparierenden Modulationsverfahrens mit niedrigen Taktzahlen in der LeistungselektronikDissertation, VDI-Fortschrittsbericht Nr. 402, Reihe 21, Elektrotechnik, VDI-Verlag
  • Wiedmann, K. (2012): Positionsgeberloser Betrieb von permanentmagneterregten SynchronmaschinenDissertation
  • Büttgenbach, S.; Burisch, A.; Hesselbach, J. (Eds.) (2011): Design and Manufacturing of Active Microsystems Series: Microtechnology and MEMSDesign and Manufacturing of Active Microsystems Series: Microtechnology and MEMS, 1st Edition
  • Averberg, A. (2009): Gleichspannungswandler für Brennstoffzellensysteme: Analyse, Vergleich und Bewertung unterschiedlicher KonzepteFortschritt-Berichte VDI, Reihe 21, Nr. 389, VDI-Verlag Düsseldorf, 2009
  • Müller, G.; Ponick, B. (2009): Theorie elektrischer Maschinen 6. Aufl.,Wiley-VCH Weinheim
  • Stölting, H.-D., Kallenbach, E., Amrhein, W. (2008): Handbook of Fractional-Horsepower DrivesSpringer-Verlag
  • Demmig, S.; Gehrking, R.; Ponick, B.; Mertens, A.; Wiedmann, K. (2007): Positionsregelung eines elektromagnetischen MikrolinearaktorsGMM-Fachbericht 54: Innovative Klein- und Mikroantriebstechnik, VDE-Verlag, Berlin und Offenbach, pp. 117-122
  • Müller, G.; Ponick, B.; Vogt, K. (2007): Berechnung elektrischer Maschinen
  • Mertens, A. (2006): Innovationen und Trends der Leistungselektronik
  • Müller, G.; Ponick, B. (2005): Grundlagen elektrischer Maschinen
  • Stölting, H.-D. (2004): Electromagnetic Actuatorsin: Janocha, H.: Actuators
  • Jäger, K.; Dittmann, F.; Stölting, H.D. (2003): Alles bewegt sich – Beiträge zur Geschichte elektrischer Antriebe
  • Schäfer, H.; Altenbernd, G. (2001): Welche elektrischen Maschinen sind aus heutiger Sicht als Starter-Generator für den Serieneinsatz geeignet?
  • Stölting, H.D.; Kallenbach, E. (2001): Handbuch Elektrische Kleinantriebe
  • Ponick, B. (1995): Fehlerdiagnose bei Synchronmaschinen
  • Seinsch, H.O. (1993): Grundlagen elektrischer Maschinen und AntriebeTeubner Verlag
  • Seinsch, H.O. (1992): Oberwellenerscheinungen in DrehfeldmaschinenTeubner Verlag
  • Skudelny, H.-Ch.; Langer, J.-G.; Mertens, A.; Schülting, L. (1992): Resonanzstromrichter mit abschaltbaren Leistungshalbleitern
  • Skudelny, H.-Ch.; Mertens, A.; Langer, J.-G. (1992): Comparative Study of High Power Devices in Converter Circuits
  • Seinsch, H.O. (1991): Ausgleichsvorgänge bei elektrischen AntriebenTeubner Verlag

Aufsätze in Fachzeitschriften

  • Blanken, N.; Ponick, B. (2023): Preferable PMSM Rotor Geometry for Reduced Axial Flux Components in the Stator Core, e & i Elektrotechnik und Informationstechnik
  • Dittmann, J.; England, M.; Ponick, B. (2023): Design of Hairpin Windings Considering the Transient Potential Distribution, e & i Elektrotechnik und Informationstechnik, Ausgabe 2/2023
  • Gerlach, M.E; De Barros, A.; Huang, X.; Langfermann, M.; Ponick, B.; Ebrahimi, A. (2023): The Analytical Beam Element Model: Novel Approach for Fast Calculation of Vibrations in Electric Machines, e & i Elektrotechnik und Informationstechnik, Ausgabe 3/2023
  • Himker, N.; Mertens, A. (2023): Analytical Design of Self-Sensing Control for PMSM using Quasi-Direct Calculation, IEEE Open Journal of Industry Applications, Volume: 4; pp. 149 - 159
  • Keuter, R. J; Kirsch, B.; Friedrichs, J.; Ponick, B. (2023): Design Decisions for a Powertrain Combination of Electric Motor and Propeller for an Electric Aircraft, IEEE Access
  • Keuter, R. J; Niebuhr, F.; Nozinski, M.; Krüger, E.; Kabelac, S.; Ponick, B. (2023): Design of a Direct-Liquid-Cooled Motor and Operation Strategy for the Cooling System, MDPI Energies 2023
  • Maroldt, N.; Lohse, S.; Seume, J. R.; Kalla, M.; Ponick, B. (2023): Multidisciplinary Design of an Electrically Powered High-Lift System, Journal of Turbomachinery, Online
  • Schuchard, L.; Bien, M.; Ziaja, K.; Blanken, N.; Göing, J.; Friedrichs, J.; di Mare, F.; Ponick, B.; Mailach, R. (2023): A Study on Quantities Driving Maintenance, Repair and Overhaul for Hybrid-Electric Aeroengines, Journal of Engineering for Gas Turbines and Power
  • Ebersberger, J.; Fauth, L.; Keuter, R.; Cao, Y.; Freund, Y.; Hanke-Rauschenbach, R.; Ponick, B.; Mertens, A.; Friebe, J. (2022): Power Distribution and Propulsion System for an All-Electric Short-Range Commuter Aircraft-A Case Study, 2022, IEEE Access
  • Ebersberger, J.; Hagedorn, M.; Lorenz, M.; Mertens, A. (2022): Potentials and Comparison of Inverter Topologies for Future All-Electric Aircraft Propulsion, IEEE Journal of Emerging and Selected Topics in Power Electronics
  • Fricke, T.; Schwarz, B.; Ponick, B. (2022): Combining Schwarz–Christoffel Mappings and Biot–Savart Law to Calculate the Clamping Plate Field in Large Salient Pole Synchronous Machines, IEEE Transactions on Magnetics
  • Schneider, V.; Behrendt, C.; Höltje, P.; Cornel, D.; Becker-Dombrowsky, F.; Puchtler, S.; Gutiérrez Guzmán, F.; Ponick, B.; Jacobs, G.; Kirchner, E. (2022): Electrical Bearing Damage, A Problem in the Nano and Macro-Range, Lubricants Aug. 2022, DOI: 10.3390/lubricants10080194
  • De Barros, A.; Galei, A.; Ebrahimi, A.; Schwarz, B. (2021): Practical Modal Analysis of a Prototyped Hydrogenerator, Vibration 2021, 4
  • Denkena, B.; Bergmann, B.; Böhse, F.; Königsberg, J.; Ponick, B. (2021): Auf dem Weg zur autonomen Werkzeugmaschine - mechatronische Dämpfungssysteme als Befähiger, antriebstechnik Ausgabe 01-02 Februar 2021, pp. 38-43
  • Dokus, M.; Mertens, A. (2021): On the Coupling of Power-Related and Inner Inverter Control Loops of Grid-Forming Converter Systems, IEEE Access Jorunal, 10.1109/ACCESS.2021.3053060
  • Ebrahimi, A. (2021): A Contribution to the Theory of Rotating Electrical Machines, IEEE Access Journal
  • England, M.; Ponick, B. (2021): Einfluss der Rotorgeometrie auf Schwingungs- und Geräuschemissionen elektrischer Fahrzeugantriebe, e & i Elektrotechnik & Informationstechnik, Band 138, Ausgabe 4
  • Fricke, T.; Schwarz, B.; Ponick, B. (2021): A Fast Calculation Approach for Pressure Finger Losses in Large Salient-Pole Synchronous Machines, IEEE Transactions on Magnetics, DOI 10.1109/TMAG.2021.3087267
  • Gerlach, M.; Zajonc, B.; Ponick, B. (2021): Mechanical Stress and Deformation in the Rotors of a High-Speed PMSM and IM, e & i Elektrotechnik und Informationstechnik, 10.1007/s00502-021-00866-5, Band 138, Ausgabe 2, pp. 96-109
  • Gerlach, M.; Zajonc, B.; Ponick, B. (2021): Methodology to Evaluate the Mechanical Stress in High Speed Electric Machines with Buried Magnets, IEEE Transactions on Industry Applications, Band 57, Ausgabe 4 (4.5.2021), pp. 3643-3653
  • Himker, N.; Lindemann, G.; Wiedmann, K.; Weber, B.; Mertens, A. (2021): A Family of Adaptive Position Estimators for PMSM Using the Gradient Descent Method, IEEE Journal of Emerging and Selected Topics in Power Electronics
  • Kostka, B.; Herwig, D.; Hanf, M.; Zorn, C.; Mertens, A. (2021): A Concept for Detection of Humidity Driven Degradation of IGBT Modules, IEEE Transactions on Power Electronics (Early Access)
  • Nejad, A. R.; Keller, J.; Guo, Y.; Sheng, S.; Polinder, H.; Watson, S.; Dong, J.; Qin, Z.; Ebrahimi, A.; Schelenz, R.; Guzmán, F. G.; Cornel, D.; Golafshan, R.; Jacobs, G.; Blockmans, B.; Bosmans, J.; Pluymers, B.; Carroll, J.; Koukoura, S.; Hart, E.; McDonald, A.; Natarajan, A.; Torsvik, J.; Moghadam, F. K.; Daems, P.-J.; Verstraeten, T.; Peeters, C.; Helsen, J. (2021): Wind turbine drivetrains: state-of-the-art technologies and future development trends, Wind Energy Science
  • Steffen, J.; Lengsfeld, S.; Jung, M.; Ponick, B.; Herranz Garcia, M.; Spagnolo, A.; Klöpzig, M.; Schleicher, K.; Schäfer, K. (2021): Design of a Medium Voltage Generator with DC-Cascade for High Power Wind Energy Conversion Systems, Energies 2021, 14(11), 3106; https://doi.org/10.3390/en14113106 - 26 May 2021
  • Stockbrügger, J.O.; Hoffmann, A.; Knebusch, B.; Dittmann, J.; Ponick, B. (2021): Analytische Ermittlung der Leiter-Leiter-Kapazität von Zweischichtwicklungen unter Berücksichtigung des Zwischenschiebers zur Vorausberechnung der Potenzialverteilung in der Ständerwicklung umrichtergespeister elektrischer Maschinen, e & i Elektrotechnik und Informationstechnik, Band 138, Ausgabe 2, pp. 117-124
  • Denkena, B.; Bergmann, B.; Böhse, M.-F.; Königsberg, J.; Ponick, B. (2020): Leistungspotenzial ausgeschöpft - Neues aktives Dämpfungskonzept für Motorspindeln, mav Oktober 2020, pp. 58-61
  • John, M.; Mertens, A. (2020): Frequency-Domain Modeling of Harmonic Interactions in Voltage-Source Inverters with Closed-Loop Control, egergies 2020, 13(21), 5823
  • Kucka, J.; Lin, S.; Friebe, J.; Mertens, A. (2020): Quasi-Two-Level PWM-Operated Modular Multilevel Converter With Nonlinear Branch Inductors, IEEE Transactions on Power Electronics, DOI: 10.1109/TPEL.2020.3042635
  • Kucka, J.; Mertens, A. (2020): Improved Current Control for a Quasi-Two-Level PWM-Operated Modular Multilevel Converter, IEEE Transactions on Power Electronics, Vol 35 No 7, pp. 6842-6853
  • Kucka, J.; Mertens, A. (2020): Designing a Passively Damped Quasi-Two-Level-Operated Modular Multilevel Converter for Drive Applications, IEEE Access, vol. 8, pp. 80218-80232
  • Meiswinkel, M.; Ebrahimi, A.: Wohlers, C.: Neschitsch, T. (2020): Transient Roebel Bar Force Calculation in Large Salient-Pole Synchronous Machines, IEEE Access Journal, vol. 8, 2020, Digital Object Identifier 10.1109/ACCESS.2020.3046789
  • Pfeiffer, J.; Küster, P.; Schulz, I. E. M.; Friebe, J.; Zacharias, P. (2020): Review of Flux Interaction of Differently Aligned Magnetic Fields in Inductors and Transformers, IEEE Access, DOI: 10.1109/ACCESS.2020.3047156
  • Schefer, H.; Fauth, L.; Kopp, T.; Mallwitz, R.; Friebe, J.; Kurrat, M. (2020): Discussion on Electric Power Supply Systems for All Electric Aircraft, IEEE Access, vol. 8, pp. 84188 - 84216
  • Schweigert, D.; Gerlach, M. E.; Hoffmann, A; Morhard, B.; Tripps, A.; Lohner, T.; Otto, M.; Ponick, B.; Stahl K. (2020): On the Impact of Maximum Speed on the Power Density of Electromechanical Powertrains, MDPI Vehicles, vol. 2(2), pp. 365-397
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the End-Winding Portion of the Winding-to-Rotor Capacitance for the Prediction of Bearing Voltage in Electrical Machines, Electrical Engineering (Archiv für Elektrotechnik), 102(4), pp.2481-2491, DOI: 10.1007/s00202-020-01046-y
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the Turn-to-Turn Capacitances for the Prediction of Voltage Peaks in a PWM-Fed Motor Winding, Electrical Engineering (Archiv für Elektrotechnik), 102(4), pp. 2381-2388, DOI: 10.1007/s00202-020-01036-0
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytical Determination of the Slot and the End-Winding Portion of the Winding-to-Rotor Capacitance for the Prediction of Shaft Voltage in Electrical Machines, Energies 2021 (MDPI), Band 14 Ausgabe 174, DOI: 10.3390/en14010174
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Stirnraumanteils der Wicklung-Stator-Kapazität in elektrischen Maschinen zur Vorausberechnung des hochfrequenten Common-Mode-Stroms, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 203-211, DOI: 10.1007/s00502-020-00803-y
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Nutschlitzanteils der Stator-Rotor-Kapazität zur Vorausberechnung und Reduzierung von Lagerspannungen in elektrischen Maschinen, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 212-217, DOI: 10.1007/s00502-020-00809-6
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung der Wicklung-Stator-Kapazität in elektrischen Maschinen zur Vorausberechnung des hochfrequenten Common-Mode-Stroms, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 196-202, DOI: 10.1007/s00502-020-00799-5
  • Stockbrügger, J.O.; Ponick, B. (2020): Analytische Ermittlung des Nutschlitzanteils der Wicklung-Rotor-Kapazität zur Vorausberechnung von Lagerspannungen in elektrischen Maschinen, e & i Elektrotechnik und Informationstechnik, Band 137 Ausgabe 4, pp. 188-195, DOI: 10.1007/s00502-020-00798-6
  • De Gennaro, M.; Jürgens, J.; Zanon, A.; Gragger, J.; Schlemmer, E.; Fricassè, A.; Marengo, L.; Ponick, B.; Trancho, E.; Kinder, J.; Cavallini, A.; Mancinelli, P.; Hernandez, M.; Messagie, M. (2019): Designing, Prototyping and Testing of a Ferrite Permanent Magnet Assisted Synchronous Reluctance Machine for Hybrid and Electric Vehicles Applications, Systainable Energy Technologies and Assessments, Vol. 31 (2019), pp. 86 - 101
  • Denkena, B.; Bergmann, B.; Teige, C.; Böhse, F.; Königsberg, J.; Klemme, H. (2019): Störfaktoren ausgeschlossen, NC-Fertigung Ausgabe 07-08 (2019), pp. 18-21
  • Denkena, B.; Bergmann, B.; Teige, C.; Ponick, B.; Königsberg, J. (2019): Hybride Spindel für vielfältigen Einsatz - Vorspannungsregelung von Spindeln mit Hilfe von Formgedächtnislegierungen, mav Dezember 2019, pp. 70-73
  • England, M.; Ponick, B. (2019): Automatisierter Entwurf von Haarnadelwicklungen anhand von tabellarischen Belegungsplänen, e & i - Elektrotechnik & Informationstechnik, Vol. 136 Issue 2 - April 2019, pp. 159 - 167
  • Kucka, J.; Mertens, A. (2019): Common-Mode Voltage Injection Techniques for Quasi-Two-Level PWM-Operated Modular Multilevel Converters, IEEJ Journal of Industry Applications, Vol. 8, Iss. 2, pp. 287-294
  • Raziee, S. M.; Misir, O.; Ponick, B. (2019): Multiple Multiphase Combined Star-Polygon Winding Analysis, IEEE Transactions on Industrial Electronics, vol. 66, no. 10, pp. 7468-7479
  • Sarstedt, M.; Dokus, M.; Gerster, J.; Himker, N.; Hofmann, L.; Lehnhoff, S.; Mertens, A. (2019): Standardized Evaluation of Multi-Level Grid Control Strategies for Future Converter-Dominated Electric Energy Systems, at-Automatisierungstechnik Vol. 67, Issue 11, pp. 936-957 , ,
  • Henke, M.; Narjes, G.; Hoffmann, J.; Wohlers, C.; Urbanek, S.; Heister, C.; Steinbrink, J.; Canders, W.-R.; Ponick, B. (2018): Challenges and Opportunities of Very Light High-Performance Electric Drives for Aviation MDPI Energies
  • Jan Karthaus, Markus Balluff, Michael Schröder, Martin Gerlach und Kay Hameyer (2018): Study on the Effects of Stator Segmentation on the Characteristics of an Electrical Vehicle Traction Drive, International Compumag Society, Vol. 25 No.1
  • John, M.; Mertens, A. (2018): Harmonic Domain Model of an Open-Loop Controlled PWM Converter, Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska (IAPGOS), Vol. 8, No. 2, pp. 25-29
  • Königsberg, J.; Reiners, J.; Ponick, B. ; Denkena, B.; Bergmann, B. (2018): Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction, International Journal of Automation Technology, Vol. 12, No. 5, pp. 669-677
  • Markus Balluff, Jan Karthaus, Michael Schröder, Martin Gerlach und Kay Hameyer (2018): Untersuchung der Auswirkungen der Statorsegmentierung auf die Eigenschaften eines elektrischen Kraftfahrzeugtraktionsantriebs, e & i Elektrotechnik und Informationstechnik, Heft 2.2018
  • Misir, O.; Raziee, S. M.; Spyridonidis, I.; Brand, J.; Bothmann, F.; Dreyer, M.; Ponick, B. (2018): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils, IEEE Transactions on Industry Applications, Vol. 54, No. 5, pp. 4315-4323, Sept.-Oct. 2018
  • Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J. R.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems MDPI Energies
  • Raziee, S. M.; Misir, O.; Ponick, B. (2018): Combined Star-Delta Winding Analysis IEEE Transactions on Energy Conversion, vol. 33, no. 1, pp. 383- 394, March 2018
  • Trancho E.; Ibarra, E.; Arias, A.; Kortabarria, I.; Juergens, J.; Marengo, L.; Fricassé, A.; Gragger, J. (2018): PM-Assisted Synchronous Reluctance Machine Flux Weakening Control for EV and HEV Applications IEEE Transactions on Industrial Electronics Vol.65, No.4 pp. 2986 - 2995
  • Wohlers, C.; Juris, P., Kabelac, S.; Ponick, B. (2018): Design and Direct Liquid Cooling of Tooth-Coil Windings, Electrical Engineering, Volume 100, Issue 4, pp. 2299–2308
  • Kanus, M.; Radosavac M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2017): Transferprojekt zum Thema Lineardirektantrieb für konventionelle Fördergurte, f + h fördern und heben, Ausgabe 10/2017, S. 56 - 59,
  • Kucka, J.; Karwatzki D.; Baruschka, L.; Mertens, A. (2017): Modular Multilevel Converter With Magnetically Coupled Branch Inductors, IEEE Transactions on Power Electronics , vol.32, no.9, pp. 6767-6777
  • Kucka, J.; Karwatzki, D.; Mertens, A. (2017): Enhancing the Reliability of Modular Multilevel Converters Using Neutral Shift, IEEE Transactions on Power Electronics, Vol. 32, No. 12, pp. 8953-8957
  • Misir, O.; Ponick, B. (2017): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering, Archiv für Elektrotechnik, Vol. 99, Issue 2, pp. 615-624
  • Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R.; Ponick, B. (2017): Prediction of Losses and Efficiency for Three-Phase Induction Machines Equipped with Combined Star-Delta Windings, IEEE Transactions on Industry Applications, Vol. 53, No. 4, pp. 3579 - 3587, July-Aug.
  • Raziee, S. M.; Misir, O; Ponick, B. (2017): Winding Function Approach for Winding Analysis, IEEE Transactions on Magnetics, Vol. 53, No. 10, October
  • Krone, T.; Xu, C.; Mertens, A. (2016): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Transactions on Industry Applications, DOI: 10.1109/TIA.2016.2618785
  • Mertens, A.; Kucka, J. (2016): Quasi Two-Level PWM Operation of an MMC Phase Leg With Reduced Module CapacitancePower Electronics, IEEE Transactions on , vol.21, no.10, pp.6765-6769
  • Misir, O.; Ponick, B. (2016): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering – Archiv für Elektrotechnik, Volume 98, Issue 4
  • Misir, O.; Dobbert, F.; Ponick, B. (2016): Analytical Method for the Air Gap Permeance Calculation of Salient Pole Synchronous Machinese & i Elektrotechnik und Informationstechnik, Volume 133, Issue 2, pp. 103-111
  • Misir, O.; Raziee, S. M.; Ponick, B. (2016): Determination of the Inductances of Salient Pole Synchronous Machines Based on the Voltage Equation of a Single Coil in the Stator Winding, IEEE Transactions on Industry Applications, Volume 52, No. 5, pp. 3792-3804
  • Quattrone, F.; Ponick, B. (2016): Maschinendesign für geberlos geregelte PMSM, e & i Elektrotechnik und Informationstechnik
  • Misir, O.; Dobbert, F.; Ponick, B. (2015): Analytisch-numerische Berechnung des magnetischen Luftspaltleitwerts für den Läufer einer Schenkelpolsynchronmaschinee & i Elektrotechnik und Informationstechnik, Volume 132, Issue 1, pp. 33-38
  • Mustafa, R.; Küçükay, F.; Boseniuk, F.; Ponick, B.; Tang, T.; Köhler, J.; Ullrich, B.; Mertens, A. (2015): Innovative Electric Vehicle Modelling for Energy Management ApplicationsInternational Journal of Vehicle Design, vol. 68, no. 4, pp. 265-284
  • S.H. Teichel, M. Dörbaum, O. Misir, A. Merkert, A. Mertens, J.R. Seume, B. Ponick (2015): Design considerations for the components of electrically powered active high-lift systems in civil aircraftCEAS Aeronautical Journal, Volume 6, Number 1, pp. 49-67
  • A. Merkert, T. Krone, A. Mertens (2014): Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-DevicesPower Electronics, IEEE Transactions on , vol.29, no.5, pp.2238,2245
  • Bostanci, E.; Neuschl, Z.; Plikat, R.; Ponick, B. (2014): No-Load Performance Analysis of Brushless DC Machines With Axially Displaceable RotorIndustrial Electronics, IEEE Transactions on, vol. 61, Issue 4, pp. 1692-1699
  • Ebrahimi, A. (2014): Auslegung eines EC-Motors für aktiv angetriebene Knieprothesen(Fachzeitschrift Orthopädie-Technik) 2014
  • Friebe, J.; Zacharias, P. (2014): Review of Magnetic Material Degradation Characteristics for the Design of Premagnetized InductorsIEEE Transactions on Magnetics, Vol. 50, No. 3, March 2014
  • Jürgens, J.; Brune, A.; Ponick, B. (2014): Weg von teuren PermanentmagnetenZeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (ZfAW), Heft 4/2014, pp. 49-55
  • M. Blank, M. Calabria, R. Dietz, F. Fuchs, T. Klingenberg, S. Lehnhoff, A. Mertens, W. Schumacher (2014): Agentenbasierte Vorhaltung und Erbringung von PrimärregelleistungAutomatisierungstechnik 2014, vol. 62, no. 5, pp. 347-363
  • R. Meyer, A. Zlotnik, A. Mertens (2014): Fault Ride-Through Control of Medium-Voltage Converters With LCL Filter in Distributed Generation SystemsIEEE Transactions on Industry Applications, vol. 50, no. 5, 2014, pp. 3448-3456
  • Baruschka, L.; Mertens, A. (2013): A New Three-Phase AC/AC Modular Multilevel Converter With Six Branches in Hexagonal Configuration IEEE Transactions on Industry Applications, Vol. 49
  • Braunisch, D.; Ponick, B; Bramerdorfer, G. (2013): Combined Analytical-Numerical Noise Calculation of Electrical Machines Considering Nonsinusoidal Mode ShapesIEEE Transactions on Magnetics, Vol. 49 , Issue 4, pp. 1407 - 1415
  • Dang L.; Kuhn H.; Mertens, A. (2013): Digital Adaptive Driving Strategies for High-Voltage IGBTsIEEE Transactions on Industry Applications, Volume 49, Nr. 4
  • Kampen, D.; Quattrone, F.; Ponick, B. (2013): Frequenzumrichterbedingte Lagerströme: was wirklich hilftAntriebstechnik 09/2013
  • Ponick, B.; Dück, P. (2013): Energieverbrauch von elektrischen Antrieben optimieren – Schnelle, vollständig automatisierbare Simulationsrechnungen, ti Technologie Informationen, 01/2013, p. 10
  • A. Mertens, F. Fuchs, L. Baruschka (2012): Wandler im MeerespulsErneuerbare Energien, 07/2012
  • B. Denkena, W. Bickel, J. Emmrich, B. Ponick (2012): Entwurf eines innovativen Spindelmotors zur Erhöhung der Prozessstabilität von FrässpindelnZeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2012, Seite 518-521, Carl Hanser Verlag
  • Ganesan, V., Wiedmann, K., Janssen, G., Ponick, B., Mertens, A. (2012): Development of Drive Systems Based on Electromagnetic MicroactuatorsIndustrial Electronics, IEEE Transactions on , vol.59, no.3, pp.1409-1417, March 2012
  • Stübig, C.; Ponick, B. (2012): Comparison of Calculation Methods for Hybrid Stepping MotorsIndustry Applications, IEEE Transactions on , vol.48, no.6, pp.2182,2189
  • A. Kampker, T. Vogels, C. Nowacki, Rainer Schmidt, M. Harding, Dirk Uwe Sauer, Madeleine Ecker, B. Ponick, A. Brune, Axel Mertens, B. Ullrich (2011): E-Antrieb.Net: Development- and production environment for electric drive trains in a SME focused network (Megatrend: electro mobility)1. WGPJahreskongress, Berlin
  • B. Denkena, W. Bickel, B. Ponick und J. Emmrich (2011): Dynamic analysis of a motor-integrated method for a higher milling stabilityProductionn Engineering, Volume 5, Number 6, pp. 691-699
  • Ponick, B. (2011): Miniaturisation of electrical machinesCOMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30 Iss: 4, pp.1139 - 1147
  • Ponick, B. (2010): Energieeffizienz - Welche Technologien bringen wirklich etwas?eta [energie] | Datei |
  • Raziee, S. M.; Meshgin Kelk, H.; Reza-Alikhani, H.-R.; Omati, A. (2010): Air-Gap Eccentricity Effects on Harmonic Contents of Field Current in Synchronous GeneratorsInternational Review of Electrical Engineering, vol. 5. n. 1, pp. 83-89
  • S.Tegeler; F. Quattrone; B. Ponick (2010): Windgeneratoren effizient berechnen - Kopplung analytischer und numerischer Berechnungsverfahren für doppelt gespeiste Asynchrongeneratoren.Antriebstechnik 11/2010
  • Hansen, S.; Janssen, G.; Ganesan, V.A.; Ponick, B.; Mertens, A.; Gatzen, H.H. (2009): Linearer skalierbarer Mikro-Reluktanzschrittmotor, 4. Kolloquium MikroproduktionBIAS Verlag Bremen
  • Helmer, R.; Garbe, E.; Steinbrink, J.; Ponick, B. (2009): Combined analytical-numerical calculation of electrical machines,Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic
  • Laczynski,T.; Mertens,A. (2009): Predictive Stator Current Control for Medium Voltage Drives With LC FiltersIEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 24, NO. 11, NOVEMBER 2009, pages (2427-2435)
  • Wiedmann, K.; Mertens, A. (2009): Analysis and comparison of sensorless control methods for permanent magnet machine drives at low speed,Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic
  • Demmig, S.; Gehrking, R.; Hahn, M.; Wiedmann, K.; Ponick, B.; Gatzen, H.-H.; Mertens, A. (2008): Technical progress in designing and controlling of active microsystems, Volume 14, Number 12, November 2008, Springer Berlin / Heidelberg
  • Ebrahimi, A.; Sandidzadeh, M. (2008): Fuzzy Logic control of regenerative braking in DC Electrical RailwayICASTOR journal of Engineering vol.2, No.1, 2008
  • Brune, K; Seinsch, H.O. (2006): Performance of three-phase motors after disconnecting damaged coilsElectrical Engineering, vol. 89, no. 4, pp. 271-283
  • Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design improvements for a linear hybrid step micro-actuator
  • Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2002): Linear Microactuator with Enhanced Design
  • Edler, J.; Stölting, H.-D.; Föhse, M.; Gatzen, H.H. (2002): A linear microactuator with enhanced design
  • de Wit, B.; Kleiner, F.; Ponick, B. (2001): Choosing Electric Turbocompressor Drivers
  • Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2001): Elektromagnetischer Mikrolinearantrieb
  • Jacob, A. (2001): Magnetischer Leitwert zweiseitig genuteter Anordnung
  • Jacob, A.; Seinsch, H.O. (2001): Einfluß magnetischer Nutenverschlusskeile auf den magnetisch wirksamen Luftspalt und die Nutstreuung
  • Ponick, B. (2001): Pendelmomentanregungen bei Asynchronmaschinen mit Schleifringläufer
  • Hausberg, V.; Seinsch, H.O. (2000): Kapazitive Lagerspannungen und -ströme bei umrichtergespeisten InduktionsmaschinenElectrical Engineering, vol. 82, pp. 153-162
  • Kleen, S.; Ehrfeld, W.; Michel, F.; Nienhaus, M.; Stölting, H.-D. (2000): Ultraflache Motoren im Pfennigformat
  • Ponick, B. (2000): Einfluß der Nutschrägung auf die axiale Verteilung des Luftspaltfelds elektischer Maschinen
  • Eckardt, R.; Ponick, B. (1999): Förderhilfe – Kompressoren mit magnetgelagerten Motoren unterstützen Erdgasförderung (deutsche Ausgabe) Smart Compression – Compressors with magnetic-bearing motors are used to pump natural gas (englische Ausgabe)
  • Mertens, A.; Eckardt, D. (1998): Voltage and Current Sensing in Power Electronic Converters using Sigma-Delta A/D Conversion
  • Ponick, B. (1998): Das Luftspaltmoment elektrischer Maschinen unter Berücksichtigung parametrischer Effekte
  • Ponick, B. (1997): Meßspulen zur Analyse des Luftspaltfelds elektrischer Maschinen
  • Mertens, A. (1994): Performance Analysis of Three-Phase Inverters Controlled by Synchronous Delta-Modulation Systems
  • Mertens, A.; Skudelny, H.-Ch.; Caldeira, P.P.A.; Lipo, T. (1994): Characterization of GTO's under different Modes of Zero Current Switching
  • Ponick, B. (1993): Über den Einfluß der Hauptfeldsättigung auf Ausgleichsvorgänge bei elektrischen Antrieben und eine einfache Methode zu ihrer Berücksichtigung
  • Mertens, A. (1992): Harmonic Distortion in Three-Phase Inverters Controlled by Synchronous Sigma-Delta-Modulation
  • Mertens, A. (1992): Analyse des Oberschwingungsverhaltens von taktsynchronen Delta- Modulationsverfahren zur Steuerung von Pulsstromrichtern bei hoher Taktzahl (Dissertationsschrift)
  • Mertens, A.; Skudelny, H.-Ch. (1991): Switching Losses in a GTO Inverter for Induction Heating

Aufsätze in einem Tagungsband

  • Behrendt, C.; Dittmann, J.; Ponick, B. (2023): Sensitivity of the Common-Mode Characteristics of a Stator Winding Regarding the Assumed Hairpin Position in a Slot, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society
  • Blanken, N.; Boe,V.; Ponick,B. (2023): Rapid Electromagnetic Scaling Methodology for the Electric Propulsion of a Hybrid-Electric Aircraft, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023
  • Brinker, T.; Hoffmann, L.; Friebe, J. (2023): Non-Coupled Inductors for Dual-Buck and Differential-Buck Single-Phase Inverters, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2078-2085
  • Cao, Y.; Fauth, L.; Keuter, R.; Sanwongwanich, A.; Novak, M:, Blaabjerg, F.; Ponick, B.; Mertens, A.; (2023): Inverter Design for Future Electrified Aircraft Propulsion Systems under Consideration of Wear-Out Failure and Random Failure, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 
  • De Barros, A.; Ridder, A.; Ebrahimi, A.; Schwarz, B. (2023): Estimation of the Damper Winding Pole-to-Pole Impedance in Hydro Generators, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023
  • Dittmann, J.; Ponick, B. (2023): Comparison of the Measured and Simulated Potential Distributions in an Inverter-Fed Hairpin Stator Winding, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society
  • Ebersberger, J.; Keuter, R.J.; Ponick, B.; Mertens, A. (2023): Power Distribution and Propulsion System for an All-Electric Regional Aircraft, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023
  • Fauth, L.; Ebersberger, J.; Cao, Y.; Friebe, J. (2023): Advantages of a Variable Board Supply Voltage in All-Electric Aircraft With Regard to Cosmic Radiation Induced Failures, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023
  • Fauth, L.; Friebe, J. (2023): Overview on the Effects of Mission Profiles on Radiation Induced Failures in All-Electric Aircraft, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023
  • Hagedorn, M.; Rettner, C.; Korn, M.; Mertens, A. (2023): Comparison of Modeling Methods for Inverter and Battery Loss Calculations in EV Traction Drives, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society
  • Heide, D.; Ponick, B. (2023): Acoustic Noise Analysis of an External Rotor Ferrite Permanent Magnet Airborne Wind Generator, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023
  • Henkenjohann, J.; Zhang, D.; Mertens, A. (2023): Compensation of Radial and Tangential Mode 0 Vibration of a Dual Three-Phase Synchronous Machine by Injecting a Leakage Flux, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society
  • Himker, N.; Lindemann, G.; Mertens, A. (2023): Comparison of Different Compensation Methods of the Mutual Inductance for Self-Sensing Control, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023
  • Himker, N.; Mertens, A. (2023): Using the Flux Increment over a Pulse-Width Modulation Period for Anisotropy-Based Self-Sensing Control, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 
  • Hoffmann, L.; Brinker, T.; Friebe, J. (2023): Power Loss Analysis of a Single-Phase Differential Buck Inverter with Power Decoupling Utilizing Energy Stored in Output Capacitors, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2163-2168
  • Höltje, P.; Jünemann, L.; Knebusch, B.; Euler-Rolle, N.; Zeiler, A.; Mertens, A.; Ponick, B. (2023): Prediction and Measurement of Bearing Currents in an Electric Traction Drive System, International Conference on Power Electronics (ICPE 2023-ECCE Asia), Jeju, Korea, 22-25.Mai 2023
  • Hullmann, M.; Krotsch, J.; Ponick, B. (2023): Eddy Current Losses in Permanent Magnets of Inverter-Driven Synchronous Machines, VDE Antriebssysteme 2023
  • Hullmann, M.; Ponick, B. (2023): Calculation of Eddy Current Loss in Permanent Magnets of a Linear Hybrid Stepper Motor for a Conveyor System, 2023 14th International Symposium on Linear Drivers for Industry Applications (LDIA)
  • Keuter, R.J.; Melo, S. P.; Jois, P. K.; Cerdas, F.; Hermann, C. ; Ponick, B. (2023): Investigation of Electric Motors For All-Electric Aircraft with Different Material Combinations from an Environmental Perspective, Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference, Venedig, 28.-31. März 2023
  • Krüger, E. C.; Kalla, M.; Ponick, B. (2023): Transient Model for Synchronous Machines with Respect to Saturation of Ferromagnetic Materials, IEEE International Electric Machines & Drives Conference (IEMDC)
  • Lorenz, M.; Laumann, J.; Mertens, A. (2023): Adding a Modular Multilevel Branch to a Conventional Converter to Enable the Quasi-Three-Level Operation Mode, IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society
  • Lorenz, M.; Mertens, A. (2023): Experimental Validation of the Quasi-Three-Level Operation Mode for a Hybrid Modular Multilevel Converter with Series-Connected Clamping Switches, ICPE ECCE Asia 2023, Jeju, 22.-25. May
  • Manthey, T.; Brinker, T.; Friebe, J. (2023): System Optimized Electronic Design for Photovoltaic Module Integrated Micro-Inverters, 2023 11th International Conference on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 2475-2480
  • Mirzadeh, M.; Mertens, A. (2023): A Decentralized Coordination of Inverter-Based Generation Units for a Bottom-up Black Start without Communication, ICPE ECCE Asia 2023, Jeju, 22.-25. May
  • Mirzadeh, M.; Mertens, A. (2023): Inverter-based Tone Burst Signals for Decentralized Communication-less Blackout Detection, 2023 International Conference on Energy Technologies for Future Grids (ETFG 2023), Wollongong, Australia, 3.-6. Dec. 2023
  • Mirzadeh, M.; Strunk, R.; Mertens, A. (2023): Parameterization of a Decentralized Bottom-up Black Start Sequence in Inverter-Dominated Grids, IEEE Workshop on the Electronic Grid (eGRID), Karlsruhe, 16.-19.Oct 2023
  • Ridder, A.; De Barros, A.; Emmrich D.; Ebrahimi, A.; Schwarz, B. (2023): Effect of the Damper Winding Pole-to-Pole Connection on the Subtransient Reactance and Steady-State Damper Current in Hydro Generators, International Electric Machines and Drives Conference (IEMDC), San Francisco, 15.-18.Mai 2023
  • Schepe, C.; Ponick, B. (2023): Evaluation of an Induction Machine’s Differential High Frequency Inductance for Self-Sensing Control Considering Iron Saturation, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023
  • Schuchard, L.; Bien, M.; Ziaja, K.; Blanken, N.; Göing, J.; Friedrichs, J.; di Mare, F.; Ponick, B.; Mailach, R. (2023): A Study on Quantities Driving Maintenance, Repair and Overhaul for Hybrid-Electric Aeroengines, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, Boston, MA, 2023
  • Strunk, R.; Mertens, A. (2023): Impedance-Based Stability Analysis of Droop-Controlled AC Microgrids with the Generalized Nyquist Criterion, The 25th European Conference on Power Electronics and Applications (EPE 2023), Aalborg, Denmark, 2023 
  • Strunk, R.; Reus, L.; Hofmann, L.; Mertens, A. (2023): Fixed-Frequency Operation of an Island Grid with Multiple Grid-Forming Inverters and GPS-Based Synchronisation, 7th International Hybrid Power Plants & Systems Workshop (HYB 2023), pp. 30 – 36
  • Wiesemann, J.; Friebe, J.; Mertens, A. (2023): Comparison of Wide Bandgap Semiconductors for Electric Vehicle Drivetrains, E-MOTIVE by FVA, Schweinfurt, Deutschland, 2023
  • Willich, V.; Mertens, A. (2023): Self-Sensing Control of a PMSM used for an Automotive Application with a novel Rotor Position Estimator based on the Back-Electromotive Force, The 11th International Symposium on Sensorless Control for Electrical Drives (SLED 2023), Seoul, Republic of Korea, 2023
  • Zhu, X.; Ponick, B. (2023): Hybrid Analytical-Numerical Calculation of Equivalent Circuit Parameters and Steady-State Performance of DFIG, 2023 26th International Conference on Electrical Machines and Systems (ICEMS), Zhuhai, China, 2023, pp. 903-910
  • Ali, M.; Bushra, R.; Friebe, J.; Mertens, A. (2022): Improvement of EMI Filter Attenuation Using Shielding, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Ali, M.; Bushra, R.; Friebe, J.; Mertens, A. (2022): Design and Potential of EMI CM Chokes with Integrated DM Inductance, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Ali, M.; Bushra, R.; Magdowski, M.; Vick, R.; Friebe, J.; Mertens, A. (2022): Prediction of Stray Capacitance of CM Chokes and its Influence on EMI Filters, PCIM 2022, Nürnberg, Germany, 10.-12.05.2022
  • Ali, M.; Friebe, J.; Mertens, A. (2022): Design and Comparison of Output Filter Configurations for SiC-MOSFET-Based Automotive DC-AC Inverters, ECCE 2020, Detroit, Michigan, USA, 09.-13.10.2022
  • Apte, P.; Fräger, L.; Friebe, J. (2022): Configurable ISOP-IPOP DC-DC Converter for Universal Solid-State Transformer, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Araújo Gomes, L. V.; Manthey, T.; Friebe, J. (2022): Investigation of an Interleaved Current-Fed Single Active Bridge DC-DC Converter for PV Applications, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Bagaber, B.; Heide, D.; Ponick, B.; Mertens, A. (2022): Efficiency and Lifetime Analysis of Several Airborne Wind Energy Electrical Drive Concepts, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Bagaber, B.; Mertens, A. (2022): Energy Storage Systems for Airborne Wind Generators, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Beckemeier, C.; Friebe, J. (2022): Novel Current Balancing Method for HF Interleaved Converters with Reduced Control Effort, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Behrendt, C.; Dittmann, J.; Knebusch, B.; Ponick, B. (2022): Common-Mode Impedance Prediction of a High-Frequency Hairpin Stator Winding Based on FEM and Modified Nodal Analysis, SPEEDAM 2022, Sorrento, Italy, 22.-24.06.2022
  • Behrendt, C.; Dittmann, J.; Knebusch, B.; Ponick, B. (2022): An Investigation Into the Trade-Off Between Full Machine and Single-Slot FEM Simulations for Electrical Machine Modeling at High Frequencies With Respect to Inter-Wire Couplings, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Bezerra, V. F.; Manthey, T.; Friebe, J. (2022): Design of Planar Coupled Inductor Applied to Zero Current Switching Clamped-Current Converter, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Bien, M.; Göing, J.; Friedrichs, J.; Ziaja, K.; Mare, F.; Blanken, N.; Cao, Y.; Mertens, A.; Ponick, B.; Schuchard, L.; Voigt, M.; Mailach, R.; (2022): Modelling Degradation Mechanisms in Hybrid-Electric Aircraft Propulsion Systems, ISABE 2022, Ottawa, Canada, 25-30.09.2022
  • Blanken, N; Bieber, M.; Ponick, B. (2022): Design of Axial End Region of Additively Manufactured Rotors of Synchronous Machines to Reduce the Axial Magnetic Stator Flux Density, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Brinker, T.; Gräber, H.; Friebe, J. (2022): GaN HEMT and SiC Diode Commutation Cell based Dual-Buck Single-Phase Inverter with Premagnetized Inductors and Negative Gate Driver Turn-off Voltage, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Brinker, T.; Mand, P.; Friebe, J. (2022): Impact of GaN-HEMT Combinations with Different Die-Size on the Efficiency of a Single-Phase Photovoltaic Differential Buck Inverter, ECCE USA 2022, Detroit, USA, 09.-13.10.2022
  • Cao, Y.; Fauth, L.; Friebe, J.; Mertens, A. (2022): Potentials to Improve the Post-Fault Performance of a Fault-Tolerant Inverter System in Electrified Aircraft Propulsion System, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • De Barros, A.; Gerlach, M.E.; Huang, X.; Langfermann, M.; Ponick, B.; Ebrahimi, A. (2022): Calculation of Electric Machines Vibration Using an Analytical Beam Element Model, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Dierks, R.; Mertens, A. (2022): Novel Operation Mode of the Modular Multilevel Matrix Converter based on a Dimensioning Algorithm, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Dittmann, J.; Behrendt, C.; Ponick, B. (2022): Prediction of the Voltage Distribution in a Inverter-Fed Hairpin Stator Winding, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022
  • England, M.; Helmer, R.; Ponick, B. (2022): Reduction of Torque Ripple and Vibration of Permanent Magnet Synchronous Machines with Sinusoidal Cavities, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022
  • Fauth, L.; Willer, F.; Friebe, J. (2022): A Compact Solid State Transformer for Replacing Conventional Medium Power Transformer in Weight-Critical Applications, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Fricke, T.; Pickert, P.; Schwarz, B.; Ponick, B. (2022): Combining Schwarz-Christoffel Mappings and Biot-Savart Law to Calculate the High-Frequency Current Distribution Inside a Single Slot, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Gerlach, M.E.; Bender, T.; Ponick, B. (2022): Influence of Round Wire Winding and Insulation on the Vibration Behavior of Electric Machines, SPEEDAM 2022, Sorrento, Italy, 22.-24.06.2022
  • Gerlach, M.E.; Hoffmann, A.; Ponick, B. (2022): Design of High Speed Electric Machine for an Automotive Powertrain, E-MOTIVE Expert Forum 21.-22.09.2022, Wolfsburg
  • Gerlach, M.E.; Langfermann M.; Ponick, B. (2022): Influence of Conecentrated Winding and Insulation on the Vibration Behavior of Electric Machines, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022
  • Gerlach, M.E.; Weber S.; Ponick, B. (2022): Influence of Hairpin Winding and Insulation on the Vibration Behavior of Electric Machines, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Hagedorn, M.; Lorenz, M.; Mertens, A. (2022): Cascaded H-Bridge Converter Designs for Future Short-Range All-Electric Aircraft Propulsion, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Henkenjohann, J.; Andresen, J.; Mertens, A. (2022): Comparison of Magnetic Noise Compensation Techniques for Dual Three-Phase Electrically Excited Synchronous Machines, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Himker, N.; Krümpelmann, M.; Mertens, A. (2022): Low Phase Shift Filter for Current Sensing based on the Difference between AC Machine Models with and without Iron Losses, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Hoffmann, L.; Brinker, T.; Teichert, T.; Zimmermann, L.; Hanemann, M.; Manthey, T.; Friebe, J. (2022): Design of a PV-Micro Inverter with Universal Three-Phase and Single-Phase Output Configurations, IEEE PESS & PELSS 2022, Kassel, Germany, 02.-04.11.2022
  • Hullmann, M.; Ponick, B. (2022): General Analytical Description of the Effects of Segmentation on Eddy Current Losses in Rectangular Magnets, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Kalla, M.; Ponick, B. (2022): Validation of a Transient Model for Induction Machines Considering Saturation and Current Displacement using Transient FEM, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022
  • Knebusch, B.; Jünemann, L.; Höltje, P.; Mertens, A.; Ponick, B. (2022): Measurement Principle for Measuring High Frequency Bearing Currents in Electric Machines and Drive Systems, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Kostka, B.; Mertens, A. (2022): Practical Implementation of a Concept for In-Situ Detection of Humidity-Related Degradation of IGBT Modules, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Lengsfeld, S.; Grundmann, J.; Oomen, M.; Vargas-L.; Ponick, B.; Jung, M. (2022): Comparing Armature Windings for a 10 MW Fully Superconducting Synchronous Wind Turbine Generator, 12th CPEEE2022 (virtuell), 25.-27.02.2022, Shiga, Japan
  • Lichtenstein, T.; Fröhling, S.; Tegtmeier, B.; Fischer, K. (2022): Climatically Induced Insulation Degradation in Power Semiconductor Modules of Wind Turbines, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Lindemann, G.; Willich, V.; Mertens, A. (2022): Novel Quasi-Direct Rotor Position Estimator for Permanent Magnet Synchronous Machines based on the Back-Electromotive Force using Current Oversampling, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Manthey, T.; Khader, M.; Friebe, J. (2022): Transformer Design Optimization and Comparison for a DC-DC Converter used in PV Micro-Inverters, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Manthey, T.; Ranft, P.; Friebe, J. (2022): Cooling Concept and Molding Packaging for PV Module Integrated Micro-Inverters, CIPS 2022, Berlin, Germany, 15.-17.03.2022
  • Mirzadeh, M.; Mertens, A. (2022): Measurement-Based Component-Level Load Modeling for Evaluation of a Current-Suppressing Loading Scenario for Microgrid Black Start Events, ISGT 2022 North America (virtuell), 24.-28.04.2022, New Orleans, USA
  • Mirzadeh, M.; Strunk, R.; Erckrath, T.; Mertens, A. (2022): Power Hardware-in-the-Loop Verification of a Cold Load Pickup Scenario for a Bottom-up Black Start of an Inverter-dominated Microgrid, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Mirzadeh, M.; Strunk, R.; Matter, S.; Bekker, I.; Munderloh, M.; Erckrath, T.; Hofmann, L.; Mertens, A. (2022): A Rule-Based Concept for a Bottom-up Multi-Master Black Start of an Inverter-Dominated Low-Voltage Cell, PEDG 2022, Kiel, Germany, 26.-29.06.2022
  • Movagharnejad, H.; Knebusch, B.; Mertens, A.; Ponick, B. (2022): Design Interactions of AC- and DC-Side Filters for Traction Drives with SiC Inverters, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Schubert, M.; Wohlers, C.; Ponick, B. (2022): Efficient Determination of the Behavior of Permanent Magnet Synchronous Machines using Magnetic Equivalent Circuits, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Stallmann, F.; Fräger, L.; Mertens, A. (2022): Design of a Robust Voltage Control for Inverters with LC Filter based on the Internal Model Control, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Stallmann, F.; Liebchen, G.; Mertens, A. (2022): Initial Start and Synchronization Algorithm for Droop-Controlled Inverters Considering the Inner Voltage Control Loop, APPEEC 2022, Melbourne, Australia (hybrid), 20. - 23.11.2022
  • Stallmann, F.; Mertens, A. (2022): Frequency-Supporting Control of a Solid-State Transformer, COMPEL 2022, Tel Aviv, Israel, 20. -23.06.2022
  • Suchan, A.; Ponick, B. (2022): Time Efficient Calculation of Current Harmonics in Inverter-Fed Permanent Magnet Excited Synchronous Machines, ICEM 2022, Valencia, Spain, 05.-08.09.2022
  • Suchan, A.; Ponick, B. (2022): Time Efficient Calculation of Current Harmonics in Inverter-Fed Electrically Excited Synchronous Machines, ICEMS 2022, Chiang Mai, Thailand, 29.11.-02.12.2022
  • Wiesemann, J.; Dumtzlaff, J.; Mertens, A. (2022): Control of an Active Gate Driver for an Electric Vehicle Traction Inverter Using Artificial Neural Networks, EPE 2022, Hannover, Germany, 05.-09.09.2022
  • Wiesemann, J.; Mertens, A. (2022): Experimental Comparison of an Active Gate Driver and a dv/dt Filter to Reduce the Output dv/dt of a SiC EV Drive Inverter, IECON 2022, Brüssel, Belgium, 17.-20.10.2022
  • Ali, M.; Brinker, T.; Friebe, J.; Mertens, A. (2021): Analysis of EMI Filter Attenuation under the Influence of Parasitic Elements of Components and their Mutual Couplings, EPE’21 ECCE Europe (virtuell) 06.-10.09.2021
  • Ali, M.; Friebe, J.; Mertens, A. (2021): 3-D Electromagnetic Modeling and Analysis of Electromagnetic Field Couplings of EMI Filter Capacitors, ECCE Asia 2021
  • Ali, M.; Friebe, J.; Mertens, A. (2021): Design and Optimization of Input and Output EMI Filters under the Influence of Parasitic Couplings, EPE’21 ECCE Europe (virtuell) 06.-10.09.2021
  • Apte, P.; Lin, S.; Fraeger, L.; Friebe, J. (2021): Design Considerations for a 50 kW Dual Bridge Series Resonant DC/DC Converter with Wide-Input Voltage Range for Solid-State Transformers, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021
  • Bagaber, B.; Mertens, A. (2021): Fault Ride-Through Performance of Pumping-Cycle Airborne Wind Energy Generators with the Support of Optimally Sized Energy Storage System, ECCE Asia 2021 (Virtual), Singapore, 24-27.05.2021
  • Brinker, T.; Gehl, A.; Priefer, F.; Graue, J.; Sawang, F.; Wicht, B.; Friebe, J. (2021): Design of a Photovoltaic Power Supply for Nanosatellites, PCIM Europe digital days 2021, 03.– 07.05.2021, pp. 1317-1324
  • Brinker, T.; Hoffmann, L.; Friebe, J. (2021): Comparison of Modulation Techniques for a Single-Phase Full-Bridge Photovoltaic Micro-Inverter Considering Reactive Power Capability, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021, pp. 1-8
  • Cao, Y.; Fauth, L.; Mertens, A.; Friebe, J. (2021): Comparison and Analysis of Multi-State Reliability of Fault-Tolerant Inverter Topologies for the Electric Aircraft Propulsion System, 24th International Conference on Electrical Machines and Systems (ICEMS 2021), Gyeongju, Korea, 02.11.2021
  • Dierks, R.; Mertens A. (2021): Validation of an Extended Loss-Optimised Branch Energy Control for Modular Multilevel Converters under Unbalanced Grid Conditions, IECON 2021, Toronto, Canada (virtuell), 13.-16.10.2021
  • Ehlert, M.; Kalla, M. ; Michael, J.; Henke,C.; Traechtler, A.; Bagaber, B.; Ponick,B.; Dornaus, M. ; Demeisi, M. (2021): Tool-Independent Simulation of Electric Drive Systems with the E-Workbench, E-MOTIVE Expert Forum (virtuell) 21.-23.09.2021
  • Ehlert, M.; Michael, J.; Henke,C.; Traechtler, A.; Kalla, M.; Bagaber, B.; Ponick, B.; Mertens, A. (2021): Connecting Energy Storages from Tool Independent, Signal-flow Oriented FMUs, SMACD / PRIME 2021 | 19.-22.07.2021, Online Event
  • England, M.; Dotz, B.; Ponick, B. (2021): Evaluation of Winding Symmetry and Circulating Currents of Hairpin Windings, IEMDC 2021, (Virtual) Connecticut, USA, 17.-20.05.2021
  • Fauth, L.; Beckemeier, C.; Friebe, J. (2021): A Hybrid Active Neutral Point Clamped Converter consisting of Si IGBTs and GaN HEMTs for Auxiliary Systems of Electric Aircraft, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021
  • Fauth, L.; Mand, P.; Friebe, J. (2021): Selection of Test Site Locations for Long-Term Cosmic Radiation Tests, PCIM Europe digital days 2021, 03.– 07.05.2021, pp. 778-782
  • Fräger, L.; Ibrahim, M.; Langfermann, S.; Owzareck, M.; Friebe, J. (2021): AFE: Control Strategies under Unbalanced Grid Conditions, PCIM Europe digital days 2021, 03.– 07.05.2021
  • Fröhling, S.; Herwig, D.; Mertens, A. (2021): Contact-Integrated Temperature Measurement for Power Modules, EPE’21 ECCE Europe (virtual) 06.-10.09.2021
  • Hayes, J. G.; Cao, Y.; Yuan, X.; Suda, J. L.; Yang, X.; Friebe, J.; Ogashawara, O.; Renie, J. P.; Goodarzi, G.A. (2021): Global Perspectives on Electric Vehicle Education: Part I, EESD 2021 - Building Flourishing Communities, University College Cork, Ireland
  • Hayes, J. G.; Cao, Y.; Yuan, X.; Suda, J. L.; Yang, X.; Friebe, J.; Ogashawara, O.; Renie, J. P.; Goodarzi, G.A. (2021): Global Perspectives on Electric Vehicle Education: Part II, EESD 2021 - Building Flourishing Communities, University College Cork, Ireland
  • Heide, D.; Knebusch, B.; Ebrahimi, A.; Ponick, B. (2021): Measurement of Parasitic High-Frequency Currents in Inverter-Fed Low Speed Electrical Machines Using Rogowski Current Sensor, EPE’21 ECCE Europe (virtual) 06.-10.09.2021
  • Hoffmann, A.; Knebusch, B.; Stockbrügger, J.O.; Dittmann, J.; Ponick, B. (2021): High-Frequency Analysis of Electrical Machines Using Probability Density Functions for an Automated Conductor Placement of Random-Wound Windings, IEMDC 2021, Connecticut, USA, 17.-20.05.2021
  • Kifel, D.; Urbanek, S.; Ponick, B. (2021): Design Study on Additive Manufacturing Technologies in Permanent Magnet Synchronous Machines for Electric Aircraft, WEMDCD 2021 (virtuell), Modena, Italy, 08.-09.04.2021, pp. 325-330
  • Lin, S.; Ebrahimi, A.; Friebe, J. (2021): Impact of Electric Field on Magnetic Flux Distribution in Electrical Machines with Very Large Size, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021
  • Lorenz, M.; Kucka, J.; Mertens, A. (2021): A Modular Multilevel Converter with a Clamping Switch for Quasi-Three-Level Operation, 2021 22nd IEEE International Conference on Industrial Technology (ICIT), pp. 260-265
  • Manthey, T.; Brinker, T.; Friebe, J. (2021): Design of an Isolated DC-DC Converter for PV Micro-Inverters with Planar Transformer and PCB Integrated Winding, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021, pp. 554-560
  • Movagharnejad, H.; Knebusch, B.; Mertens, A.; Ponick, B. (2021): Traction Drives with SiC Inverters: Optimized Modelling and Design / Electrical Machines and Filter Configurations, E-MOTIVE Expert Forum (virtual) 21.-23.09.2021
  • Movagharnejad, H.; Mertens, A. (2021): Design Methodology for Dimensioning EMI Filters for Traction Drives with SiC Inverters, EPE’21 ECCE Europe (virtual) 06.-10.09.2021
  • Roche, J-P.; Friebe, J.; Niggemann, O. (2021): Neural Network Modeling of Nonlinear Filters for EMC Simulation in Discrete Time Domain, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society
  • Souza, L.; Acevedo-Bueno, D.; Vitorino, M.; Da Silva, E.; Friebe, J.; Lima, A. (2021): Single-Stage Isolated Half-Bridge/Full-Bridge Converter for DC/AC Applications, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021
  • Stallmann, F.; Mertens, A. (2021): Stability Assessment of Pω and PV Droop Controls in Highly Resistive Microgrids using Analytical Impedance Models, PEDG 2021, Virtual Conference 28.06.-01.07.2021
  • Strunk, R.; Sarstedt, M.; Mertens, A. (2021): Voltage Sensitivity Estimation Based on Measurements of Distributed PV Inverters, PEDG 2021, Virtual Conference 28.06.-01.07.2021
  • Tatusch, D.; Gorodnichev, A.; Haake, D.; Schnabel, F.; Friebe, J.; Jung, M. (2021): Hardware and Control Design Considerations for a Mobile 1 MW Input-Series Output-Parallel (ISOP) DC-DC Converter in Medium Voltage Range, ECCE USA 2021, Vancouver, Canada (virtuell), 10.-14.10.2021
  • Urbanek, S.; Frey, P.; Magerkohl, S.; Zimmer, D.; Tasche, L.; Schaper, M.; Ponick, B. (2021): Design and Experimental Investigation of an Additively Manufactured PMSM Rotor, IEMDC 2021, (Virtual) Connecticut, USA, 17.-20.05.2021
  • Wiesemann, J.; Mertens, A. (2021): An Isolated Variable-Resistance Active Gate Driver for Use in SiC-Driven Inverters, IECON 2021, Toronto, Canada (virtuell), 13.-16.10.2021
  • Zhu, X.; Wohlers, C.; Ponick, B. (2021): Improved Analytical Calculation for 2D Current Displacement in Rectangular Conductors, ICECCME 2021, Mauritius (virtuell), 07.-08.10.2021, pp. 1-8
  • Ali, M.; Friebe, J.; Mertens, A. (2020): Simplified Calculation of Parasitic Elements and Mutual Couplings of Wide-Bandgap Power Semiconductor Modules, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020
  • Ali, M.; Müller, J.-K.; Friebe, J.; Mertens, A. (2020): Analysis of Switching Performance and EMI Emission of SiC Inverters under the Influence of Parasitic Elements and Mutual Couplings of the Power Modules, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020
  • Andresen, J.; Vip, S.; Mertens, A.; Paulus, S. (2020): Compensation of the Radial and Circumferential Mode 0 Vibration of a Permanent Magnet Electric Machine based on an Experimental Characterisation, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020
  • Andresen, J.; Vip, S.; Mertens, A.; Paulus, S. (2020): Theory of Influencing the Breathing Mode and Torque Pulsations of Permanent Magnet Electric Machines with Harmonic Currents, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020
  • Berweiler, B.; Ponick, B. (2020): Current and Average Temperature Calculation for Electrically Excited Synchronous Machines in Case of Contactless Energy Supply, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Brinker, T.; Willer, F.; Heeren, H.; Fauth, L.; Friebe, J. (2020): Design of a Hybrid Two-Stage GaN-Si Inverter for BLDC Motors, ICEMS 2020 (virtuell) 24.-27.11.2020
  • Dierks, R.; Kucka J.; Mertens A. (2020): Using Both the Circulating Currents and the Common-Mode Voltage for the Branch Energy Control of Modular Multilevel Converters, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020
  • Dokus, M.; Mertens, A. (2020): Sequence Impedance Characteristics of Grid-Forming Converter Controls, PEDG 2020 (virtuell) 28.09.2020
  • Dokus, M.; Mertens, A. (2020): Sequence Impedance Characteristics of Grid-Feeding Converters, ECCE Asia 2020 (virtuell) 29.11.-02.12.2020
  • Dokus, M.; Sarstedt, M.; Mertens, A. (2020): On the Stability of Converter-Dominated Power Systems: Impedance-Based Analysis, SGES 2020 (virtuell) 23.-26.11.2020
  • Dokus, M.; Stallmann, F.; Mertens, A. (2020): Sequence Impedance-Based Stability Analysis of AC Microgrids Controlled by Virtual Synchronous Generator Control Methods, IFAC 2020 13.07, (virtuell)
  • Ebersberger, J.; Müller, J.-K.; Mertens, A. (2020): Dynamic Characterization of a SiC-MOSFET Half Bridge in Hard- and Soft-Switching and Investigation of Current Sensing Technologies, EPE’20 ECCE Europe(virtuell )07.–11. 09.2020
  • Fauth, L.; Jusko, S.; Friebe, J.; Mertens, A. (2020): GaN HEMT Based Inverter for Driving Ultrasonic Transducers, ICEMS 2020 (virtuell) 24.-27.11.2020
  • Fricke, T.; Schwarz, B.; Ponick, B. (2020): A Magnetic Equivalent Circuit to Account for Gaps Between Clamping Plate Segments in Large Synchronous Machines, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Fricke, T.; Schwarz, B.; Ponick, B. (2020): Single Equation Clamping Plate Loss Model for Large Synchronous Machines, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Friebe, J.; Fauth, L. (2020): Efficiency Optimization for Partial Load Operation of Interleaved Converters, ICEMS 2020 (virtuell) 24.-27.11.2020
  • Gerlach, M.E.; Ponick, B. (2020): Influence of the Stator Winding and Forming of the End Winding on the Vibration Behavior of Electric Machine’s Stator Core, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg, pp.1171-1177
  • Gerlach, M.E.; Zajonc, M.; Ponick, B. (2020): Methodology to Evaluate the Mechanical Stress in High Speed Electric Machines with Buried Magnets, SPEEDAM 2020 (virtuell) 24.06.2020, Sorrento, pp. 84-91
  • Haschen, E.; Ponick, B. (2020): Calculation of Slot Leakage Flux Using Equivalent Magnetic Circuits, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Helmholdt-Zhu, T.; Knebusch, B.; Borcherding H. (2020): High-Frequency Models for the Prediction of Transient Effects in Motor Windings Under Fast Rising Impulse Voltages, PCIM 2020 (virtuell), 07.07.2020, Nürnberg
  • Herwig, D.; Brockhage, T.; Mertens, A. (2020): Combining Multiple Temperature-Sensitive Electrical Parameters Using Artificial Neural Networks, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020
  • Herwig, D.; Brockhage, T.; Mertens, A. (2020): Impact of Parasitics in Power Modules and Gate Drivers on TSEP-based Temperature Estimations, ICEMS 2020 (virtuell) 24.-27.11.2020
  • Himker, N.; Strunk, R.; Mertens, A. (2020): Grid Impedance Estimation with Oversampling for Grid-Connected Converters, EPE’20 ECCE Europe (virtuell) 07.–11.09.2020
  • Himker, N.; Wächter, M.; Peinke, J.; Mertens, A. (2020): Dynamic Behaviour and Modelling of Variable-Speed Wind Turbines, PEDG 2020 (virtuell) 28.09.2020
  • Hoffmann, A.; Ponick, B. (2020): Statistical Deviation of High-Frequency Lumped Model Parameters for Stator Windings in Three-Phase Electrical Machines, SPEEDAM 2020 (virtuell) 24.06.2020, Sorrento, pp. 92-97
  • Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2020): Linear Direct Drive for Light Conveyor Belts to Reduce Tensile Forces, International Conference on Cyber-Physical Systems and Control (CPS&C'2019), pp. 398-406, https://www.springer.com/gp/book/9783030349820, DOI 978-3-030-34983-7_38
  • Lorenz, M.; Kucka, J; Mertens, A. (2020): Active Current and Energy Control for the Quasi-Three-Level Operation Mode of an Extended Modular Multilevel Converter Topology, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020
  • Mertens, A.; Movagharnejad, H.; Ali, M.; Mueller, J.-K.; Friebe, J. (2020): Design and Comparison of Filter Configurations for SiC Inverters, E-MOTIVE Expert Forum (virtual) 15.-17.09.2020
  • Roche, J.P.; Friebe, J.; Niggemann, O. (2020): Machine Learning for Grey Box Modelling of Electrical Components for Circuit- and EMC-Simulation, PCIM 2020 (virtuell), 07.07.2020, Nürnberg
  • Sarstedt, M.; Kluß, L.; Dokus, M.; Gerster, J.; Hofmann, L. (2020): Simulation of Hierarchical Multi-Level Grid Control Strategies, SGES 2020 (virtuell) 23.-26.11.2020
  • Stallmann, F.; Mertens, A. (2020): Sequence Impedance Modeling of the Matching Control and Comparison with Virtual Synchronous Generator, PEDG 2020 (virtuell) 28.09.2020
  • Suchan, A.; Ponick, B. (2020): Brush Dynamics in Electrically Excited Synchronous Machines and their Influence on the Field Winding, IECON 2020 (virtuell) 18.-21.10.2020, Singapur
  • Urbanek, S.; Keuter, R.; Peter, E.; Ponick, B. (2020): Effects of Continuous Rotor Skewing in Additively Manufactured Permanent Magnet Rotors, SPEEDAM 2020 (virtuell), 24.06.2020, Sorrento
  • Vip, S.-A.; Andresen, J.; Dräger, F.; Ponick, B. (2020): NVH-Simulation of Permanent Magnet Synchronous Traction Drives Including Torsional Mode Shapes, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Wankhede, Y.; Fauth, L.; Friebe, J. (2020): Design and Control of a Virtual DC-Link for a full GaN-based Single PhaseConverter with High Power Density, EPE’20 ECCE Europe(virtuell) 07.–11. 09.2020
  • Wohlers, C.; Ponick, B. (2020): First Estimations of Stator Dimensions for Permanent Magnet Synchronous Machines with Tooth-Coil Windings and Direct Liquid Cooling, ICEM 2020 (virtuell) 23.-26.08.2020, Göteborg
  • Wohlers, C.; Ponick, B. (2020): A Novel Method for the Fast Calculation of the Characteristics of PM Synchronous Machines, IECON 2020 (virtuell) 18.-21.10.2020, Singapur, pp. 832-837
  • Zhang, D.; Ebrahimi, A.; Wohlers, C.; Redlich, J. ; Ponick, B (2020): On the Analytical Calculation of Eddy-Current Losses in Permanent Magnets of Electrical Machines, IECON 2020 (virtuell) 18.-21.10.2020, Singapur
  • Andresen, J.; Ponick, B.; Mertens, A. (2019): Direct Radial and Circumferential Analytical Air-Gap Field Calculation for Electrical Machines, ACEMP-OPTIM 2019 27.-29.8.19, Istanbul
  • Brinker, T.; Fauth, L.; Lin, S.; Friebe, J. (2019): Impact of Passive Common Mode Cancellation on the Efficiency and Switching Performance of Power Converters, EPE’19 ECCE Europe, 02.-05.09.2019, Genova
  • Buchali, T.; Stallmann, F.; Mertens, A. (2019): "New Control Concept for a Safety-Critical Actuator in Highly Automated or Autonomous Cars", EPE’19 ECCE Europe, 02.-05.09.19
  • Dierks, R.; Kucka, J.; Mertens, A. (2019): Optimization of the Low-Frequency Mode for Modular Multilevel Converters Based On Frequency Domain Analysis Converters Based On Frequency Domain Analysis, EPE’19 ECCE Europe 02.-05.09.19, Genova
  • Dokus, M.; Mertens, A. (2019): Sequence Impedance-Based Stability Analysis of Droop-Controlled AC Microgrids, PEDG 03.-06.06.2019, Xian
  • Ebrahimi, A. (2019): Challenges of Developing a Digital Twin Model of Renewable Energy Generators, IEEE ISIE 2019, Vancouver, Canada, 12-14.06.2019
  • Ebrahimi, A.; Meiswinkel M. (2019): Modeling of Radial and Tangential Roebel Bar Force Distributions in Large Electrical Machines Considering Longitudinal Transposition, EEMODS 2019, Tokyo Japan, 17.-19.09.2019
  • Fauth, L.; Brinker, T.; Lin, S.; Friebe, J. (2019): Asymmetric Half-Bridge Configurations in Power Electronics Converters, EPE’19 ECCE Europe, 02.-05.09.2019, Genova
  • Fricke, T.; Schwarz, B.; Ponick, B. (2019): Schwarz-Christoffel-Based Open-Circuit Clamping Plate Field Calculation in Hydro Generators, IEEE IEMDC 12.-15. 05.2019 San Diego
  • Fricke, T.; Schwarz, B.; Ponick, B. (2019): A Novel Surface Impedance Based Clamping Plate Loss Model for Large Synchronous Generators, ACEMP-OPTIM 2019, 27.8-29.8.19, Istanbul
  • Friebe, J.; Lin, S.; Fauth, L.; Brinker, T. (2019): Premagnetized Inductors in Single Phase DC-AC and AC-DC- Converters, COBEP SPEC 2019, Santos, Brazil, 01.-05.12.19
  • Himker, N.; Lindemann G.; Mertens, A. (2019): Iterative Tracker for Anisotropy-Based Self-Sensing Control of PMSM, IEEE SLED 2019, Turin, Italien 09.-10.09.2019
  • Hoffmann, A.; Gerlach, M.; Lindemann, G.; Reitmeier, D.; Wiesemann J.; Mertens, A.; Ponick, B.; (2019): Hyper High-Speed for the Electrified Automotive Powertrain for Maximum Range, E-MOTIVE Expert Forum Schweinfurt 4.-5.09.2019
  • Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B. (2019): Design of an Integrated Linear Flux Modulating Motor for a Direct-Drive Belt Conveyor, IKMT2019, 10.-11.09.2019, Würzburg,
  • Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B. (2019): Operation Analysis of an Integrated Linear Flux Modulating Motor for a Direct-driven Belt Conveyor, EEMODS 2019, Tokyo Japan, 17.-19.09.2019,
  • Hullmann, M; Urbanek, S.; Ponick, B. (2019): Surface Eddy Current Suppression on Additively Manufactured Solid Rotor Active Parts, EEMODS 2019, Tokyo Japan, 17.-19.09.2019
  • Kalla, M.; Korolova, O.; Neufeld, A.; Hofmann, L.; Ponick, B. (2019): Calculating Frequency Responses of Synchronous Machines Using MIMO Transfer Functions, ACEMP-OPTIM 2019 27.8-29.8.19, Istanbul
  • Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2019): Linear Direct Drive for Light Conveyor Belts to Reduce Tensile Forces, AST 2019, St. Petersburg, Russia, 10.-12.06.2019
  • Kanus, M.; Hoffmann, A.; Overmeyer, L.; Ponick, B. (2019): Lineardirektantrieb für biegeschlaffe Transportbänder zur Reduzierung der Gurtzugkraft, 15. Fachkolloquium der WGTL in Rostock 11.+12.09.2019
  • Kucka, J.; Lin, S.; Friebe, J.; Mertens, A. (2019): Quasi-Two-Level PWM-Operated Modular Multilevel Converter With Non-Linear Branch Inductors, EPE’19 ECCE Europe 02.-05.09.19, Genova
  • Lin, S.; Brinker, T.; Fauth, L.; Friebe, J. (2019): Review of Dimensional Resonance Effect for High Frequency Magnetic Components, EPE’19 ECCE Europe, 02.-05.09.2019, Genova
  • Lin, S.; Friebe, J.; Langfermann, S.; Owzareck, M. (2019): Premagnetization of High-Power Low-Frequency DC-Inductors in Power Electronic Applications, PCIM 2019, Nürnberg
  • Lindemann G.; Himker, N.; Mertens, A. (2019): Enhanced Observer with Adaptive Reference Frame for Self-Sensing Control of PMSM, IEEE SLED 2019, Turin, Italien 09.-10.09.2019
  • Mirzadeh, M., Narjes, G., Ponick, B. (2019): Evaluation of High-Tech Electrical Steel in a High-Speed Permanent Magnet Synchronous Machine for an Aircraft Application, EEMODS 2019, Tokyo Japan, 17.-19.09.2019
  • Mueller, J.-K.; Manthey,T.; Han D.; Sarlioglu, B.; Friebe,J.; Mertens, A. (2019): Output Sine-Wave Filter Design and Characterization for a 10 kW SiC Inverter, ECCE USA, 29.09.19-03.10.19, Baltimore
  • Rehfeldt, A.; Fricke, T.; Emmrich, D.; Ponick, B. (2019): Semi-Analytical Calculation of Field Distribution in Yoke/Tooth Transition in Electrical Machines, IEEE IEMDC 12.-15.05.2019, San Diego
  • Rehfeldt, A.; Fricke, T.; Schwarz, B.; Ebrahimi, A.; Ponick, B. (2019): Semi-Analytical Calculation of Field and Loss Distribution in the Tooth Tips of Electrical Machines, EEMODS 2019, Tokyo Japan, 17.-19.09.2019
  • Trinh, N.; Atallah, A.; Sharma, K.; Kuhn, G.; Juretzek, U.; Rosendahl, J.; Bagaber, B.; Mertens, A. (2019): DFIG-Based Power Plant: System Description and Performance, IEEE PESGM 2019, 04.08.-08.08.2019, Atlanta
  • Urbanek, S.; Heide, D.; Bagaber, B.; Lohss, M.; Specht, B.; Paulig, X.; Mertens, A.; Ponick, B. (2019): Analysis of External Rotor Electric Drives for an All-Automatic Airborne Wind Energy System, IEEE IEMDC 2019, San Diego
  • Wiesemann, J.; Sommer, C.; Mertens, A. (2019): Switching Characteristics of a 1.2 kV SiC MOSFET Module using a Controllable Current-Sourced Gate Driver, PCIM 2019, Nürnberg, pp. 1466-1471
  • Zulk, S.; Mertens, A. (2019): Optimization of Air-Cooled On-Board Battery Chargers for Electric Vehicles Using WBG Devices, PCIM 2019, Nürnberg, 07.05.-09.05., pp .253-260
  • Berweiler, B.; Frey, P.; Ponick, B. (2018): Calculation of Continuous Power Curves for Electrically Excited Synchronous Machines with Air Cooling, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018
  • Denkena, B.; Bergmann, B.; Mücke, M.; Königsberg, J.; Ponick, B. (2018): Hybrid Spindle – An approach for a milling machine tool spindle with extended working range for HSC and HPC4th International Conference on System-Integrated Intelligence, Garbsen, Germany, 19 - 20.06.2018
  • Ebrahimi, A. (2018): Design Optimization of Permanent Magnet Synchronous Motors using Multilevel Ant Algorithm, 14th IEEE International Conference on Power Electronics, CIEP, Mexico 2018
  • Ebrahimi, A. (2018): A Novel Harmonic Current Control Algorithm for Torque Ripple Reduction of Permanent Magnet Synchronous Motors for Traction Application, 5th International Conference on Electrical Systems, IEEE ESARS, England, 2018
  • Ebrahimi, A. (2018): Characterization of a Large Electrical Machine Test Bench for Advanced Investigations on Wind and Hydro Generators, 4th IEEE Southern Power Electronics Conference, Singapore 2018
  • Fricke, T.; Rehfeldt, A.; Schwarz, B.; Bresemann, E.; Ponick, B. (2018): Analytical and Numerical Calculation of Sub-Conductor Circulationg Currents in Roebel Bars of Hydro Generators, IEEE ICEM 2018, Alexandroupoli Griechenland, 3-6. September 2018
  • Friebe, J.; Prior, O.; Kacki, M. (2018): High-Side Driver Supply with Reduced Coupling Capacitance, Power Conversion and Intelligent Motion (PCIM 2018), Nürnberg, 05.-07.06.2018
  • Gerlach, M.; Hoffmann, A.; Lindemann, G.; Reitmeier, D.; Sommer, S. (2018): Hochdrehzahl-Konzept für den elektrifizierten automobilen Antriebsstrang, Tag der Energieforschung 15.05.2018 Hannover
  • John, M.; Mertens, A. (2018): Frequency-Domain Model of Voltage-Source Inverters with Closed-Loop Current Control IEEE Workshop on Control and Modeling for Power Electronics (COMPEL), Padova, Italy, 25.-28.06.2018
  • Juergens, J.; Redlich, J.; Ponick, B. (2018): Comparison of Direct and Axle Drives with Electrically Excited Synchronous Machines for Traction Applications, IEEE Transportation and Electrification Conference and Expo (ITEC 2018), Long Beach, USA, 13.-15.06.2018
  • Königsberg, J.; Ponick, B. (2018): Operating Characteristics of Actively Damped Motor Spindles, Symposium on Automated Systems and Technologies, (AST) Hannover, 27.-28.09.2018
  • Königsberg, J.; Reiners, J.; Böhse, F.; Bergmann, B.; Denkena, B.; Ponick, B. (2018): Stator-Integrated Damping of Chatter Vibrations for Induction Motor Spindles, 2018 International Conference on Electrical Machines and Systems (ICEMS 2018) Jeju, Korea, 07.-10.10.2018
  • Kucka, J.; Mertens, A. (2018): Improved Current Control of a Quasi-Two-Level PWM-Operated Modular Multilevel Converter, IEEE Energy Conversion Congress & Exposition (ECCE 2018), Portland, USA, pp. 2948-2955
  • Kucka, J.; Mertens, A. (2018): Common-Mode Injection Techniques for Quasi Two-Level PWM-Operated Modular Multilevel Converters, International Power Electronics Conference (IPEC 2018), Niigata, Japan, 20.-24.05.2018, pp. 1904-1911
  • Lindemann G.; Weber B.; Mertens A. (2018): Reducing the Low-Speed Limit for Back-EMF Based Self-Sensing Speed Control by Using an FPGA-Operated Dead-Time Compensation, 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives (SLED) 13.-14.09.2018
  • Müller, J.; Brinker, T.; Friebe, J.; Mertens, A. (2018): Output dv/dt Filter Design and Characterization for a 10 kW SiC Inverter, IEEE IECON 2018, Washington D.C., USA, 21-23.10.2018
  • Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J. R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift System, AIAA / IEEE Electronic Aircraft Technology Symposium (EATS 2018), Cincinatti, USA, 12.-13.07.2018
  • Narjes, G.; Ponick, B. (2018): Novel Method for the Determination of Eddy Current Losses in the Permanent Magnets of a High-Speed Synchronous Machine, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018
  • Rehfeldt, A.; Fricke, T.; Schwarz, B.; Bresemann, E.; Ponick, B. (2018): Measurement of Sub-Conductor Circulating Currents in Roebel Bars of a Hydro Generator, IEEE ICEM 2018, Alexandroupoli Griechenland, 3-6. September 2018
  • Sewdien, V. N.; van der Meijden, M..; Breithaupt, T.; Hofmann, L.; Herwig, D.; Mertens, A.; Tuinema, B.; Rueda Torres, J. (2018): Effects of Increasing Power Electronics on System Stability: Results from MIGRATE Questionnaire, IEEE PES ICUE, Phuket, Thailand, 24 - 26 Oct. 2018
  • Urbanek, S.; Ponick, B. (2018): Surface Eddy Current Loss Reduction in Additively Manufactured Permanent Magnet Rotor Active Parts, IEEE International Conference on Electrical Machines (ICEM 2018) Alexandropolis, Greece, 03.-06.09.2018
  • Urbanek, S.; Ponick, B.; Taube, A.; Hoyer, K.-P.; Schaper, M.; Lammers, S.; Lieneke, T.; Zimmer, D. (2018): Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine, IEEE Transportation and Electrification Conference and Expo (ITEC 2018), Long Beach, USA, 13.-15.06.2018
  • Ebrahimi, A. (2017): Stuttgart Exo-Jacket: an Exoskeleton for Industrial Upper Body ApplicationsInternational Conference on Human System Interaction, HIS2017, Republic of Korea, 2017, pp. 258-263
  • Ebrahimi, A. (2017): Analytical Modeling of Permanent Magnetic Synchronous Motors Considering Spatial HarmonicsBrazilian Power Electronic Conference, COBEP 2017, Brazil, 2017
  • Ebrahimi, A.; Gröninger, D.; Singer, R.; Schneider, U. (2017): Control Parameter Optimization of the Actively Powerd Upper Body Exoskeleton Using Subjective FeedbacksThe 3rd International Conference on Control, Automation and Robotics, ICCAR, Japan, 2017, pp. 432-437
  • John, M.; Mertens, A. (2017): Harmonic Domain Model of an Open-Loop Controlled PWM Converter, XIX International Symposium on Theoretical Electrical Engineering, Ilmenau, Germany, 16.-19.07.2017
  • John, M.; Mertens, A.; Popp, M.; Mathis, W. (2017): Model Order Reduction for a Full Scale Grid Converter for Grid Simulations, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017
  • Karwatzki, D.; Dokus, M.; Mertens, A. (2017): Control of a Three-Phase to Five-Phase Modular Multilevel Matrix Converter Based on a Generalized Control ConceptEuropean Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017
  • Kauth, F.; Narjes, G.; Müller, J.; Seume, J. (2017): Progress in Efficient High-Lift AIAA Aviation and Aeronautics Forum and Exposition, 5.-9. Juni 2017, Denver, Colorado, USA
  • Korolova, O.; de la Torre, J.; Ponick B. (2017): Transient modeling of AC machines considering second order effectsXIX International Symposium on Theoretical Electrical Engineering, Ilmenau, Germany, 16.-19.07.2017
  • Korolova, O.; Popp, M.; Mathis, W.; Ponick B. (2017): Performance of Runge-Kutta family numerical solvers for calculation of transient processes in AC machines20th International Conference on Electrical Machines and Systems (ICEMS)
  • Krone, T.; Mertens A. (2017): Optimized Design of the Electric Power Train for Wheel Hub Drive Systems Without Friction Brakes European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017
  • Luecke, S.; Mertens, A. (2017): Self-sensing control of induction machines using an additional short-circuited rotor coilIEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, Italien, Sep.
  • Meinzer, C.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J. (2017): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine Shafts, Proceedings of the Global Power & Propulsion Society Zurich Forum, 16.-18.01.2017
  • Misir, O.; Brand, J.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part II: Analytical Steady-State Solution Method, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017
  • Misir, O.; Spyridonidis, I.; Bothmann, F.; Dreyer, M.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part I: Numerical Integration, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017
  • Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. (2017): Impact of Individual Pitch Control on Pitch Actuators in Megawatt Wind Turbines, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017
  • Movagharnejad, H.; Mertens, A. (2017): Design Metrics of Compensation Methods for Contactless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe), Warsaw, Poland, 11.-14.09.2017
  • Müller, J.; Mertens, A. (2017): Power Electronics Design for a direct-driven Turbo Compressor Used as Advanced High-Lift System in Future Aircraft, IEEE Industrial Electronics Society IECON17, Peking, China, 29.10-01.11.2017
  • Popp, M.; Mathis, W.; John, M.; Korolova, O.; Mertens, A.; Ponick, B; (2017): A Modified CCM Approach for Simulating Hierarchical Interconnected Dynamical SystemsProc. International Symposium on Circuits and Systems, ISCAS , Baltimore, US, pp. 1262–1265
  • Popp, M.; Mathis, W.; Korolova O.; Ponick B. (2017): Modeling and simulation of electrical machines within a CCM frameworkIEEE International Electric Machines and Drives Conference (IEMDC)
  • Redlich, J.; Juergens, J.; Brune, K.; Ponick, B. (2017): Synchronous Machines with Very High Torque Density for Automotive Traction Applications, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017
  • Sommer, C.; Kortazar, I.; Larrazabal, I.; Mertens, A. (2017): Design of SiC-based DC-DC Converters for Future Offshore Wind Power Applications International Conference on Silicon Carbide and Related Materials (ICSCRM), Washington, DC, 17.-22.09.2017
  • Urbanek, S.; Quattrone, F.; Ponick, B. (2017): Implementation and Validation of a New Analytic-Numeric Method for Dynamic Core Loss Calculation, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017
  • Weber, B.; Lindemann, G.; Mertens, A. (2017): Reduced observer for anisotropy-based position estimation of PM synchronous machines using current oversamplingIEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, Italien
  • Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J. (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine Model, The Science of Making Torque from Wind (TORQUE 2016) München, 5.-7. October 2016
  • Dörbaum, M.; England, M.; Ponick, B. (2016): Analysis of Eddy Currents Influencing an Electromagnetic Tilting Actuator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016
  • Dörbaum, M.; Winkel, T.; Tappe, S.; Kotlarski, T.; Ortmaier; T. Ponick, B. (2016): Torque Measurements on an Electromagnetic Tilting Actuator, actuator 2016, Bremen, Germany, 13.-15. June 2016
  • Dück, P., Ponick, B. (2016): A Novel Iron-Loss-Model for Permanent Magnet Synchronous Machines in Traction Applications., 4th International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road Vehicles & International Transportation Conference (ESARS ITEC), Toulouse, Frankreich
  • Dück, P.; Lesniewski, P.; Ponick, B. (2016): Design and Analysis of Axial-Flux Permanent Magnet Synchronous Machines as Traction Drives for Electric Vehicles, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 376-381
  • Gragger, J.; Zanon, A.; De Gennaro, M.; Juergens, J.; Fricassè, A.; Marengo, L.; Echevarria, I. O.; Kinder, J. (2016): Design features of an innovative synchronous reluctance machine for battery electric vehicles applicationSAE World Congress and Exhibition, Detroit, USA, 12.-14. April 2016
  • Haschen, E.; Korolova, O.; Ponick, B. (2016): Verbesserte Vorausberechnung des Polstreuleitwerts von Schenkelpol-Synchronmaschinen , Symposium Elektromagnetismus, Technische Akademie Esslingen (TAE), Künzelsau, Germany
  • Heseding, J.; Mueller-Deile, F.; Mertens, A. (2016): Estimation of losses in permanent magnet synchronous machines caused by inverter voltage harmonics in driving cycle operation, 18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe
  • John, M.; Mertens, A.; Baruschka, L.; Alvarez, R.; Pieschel, M. (2016): Design and Evaluation of a Test Rig for Full-Size Grid Frequency Stabilizer Modules with Ultracapacitors, 18th European Conference on Power Electronics and Applications (EPE), Karlsruhe, Germany, 5-9 September 2016
  • Juergens, J.; Fricassè, A.; Marengo, L.; Gragger, J.; De Gennaro, M.; Ponick,B. (2016): Innovative Design of an Air Cooled Ferrite Permanent Magnet Assisted Synchronous Reluctance Machine for Automotive Traction ApplicationInternational Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016
  • Karwatzki, D.; Baruschka, L.; Dokus, M.; Kucka, J.; Mertens, A. (2016): Branch Energy Balancing with a Generalised Control Concept for Multilevel Topologies - Using the Example of the Modular Multilevel Converter European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016
  • Karwatzki, D.; Mertens, A. (2016): Control Approach for a Class of Modular Multilevel Converter Topologies, IEEE Energy Conversion Congress & Exposition (ECCE 2016), Milwaukee, USA
  • Kauth, F.; Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Seume, J. R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation 2016, Brüssel, Belgien, 11.-13. Oktober 2016
  • Koupeny, J.; Lücke, S.; Mertens, A. (2016): Extended Observer-Based Simultaneous Online Parameter Estimation of Inverter-Fed Squirrel-Cage Induction Machines Considering the Influence of Current and Speed Measurement Errors, 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016
  • Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): On-Line Semiconductor Switching Loss Measurement System for an Advanced Condition Monitoring Concept, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016
  • Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): Advanced Condition Monitoring System Based on On-Line Semiconductor Loss Measurements, IEEE Energy Conversion Congress and Exposition (ECCE 2016), Milwaukee, WI, USA, 18.-22. September 2016
  • Krone, T.; Mertens, A. (2016): DC Link RMS Current Estimation in Systems with Several Converters Connected to a Shared DC Link with Distributed Capacitors, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016
  • Krupp, H.; Mertens, A. (2016): Semi-Analytical Loss Model for Rotary Transformers; European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016
  • Kucka, J.; Karwatzki, D.; Mertens, A. (2016): AC/AC Modular Multilevel Converters in Wind Energy Applications: Design Considerations, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016
  • Kucka, J.; Mertens, A. (2016): Control for Quasi Two-Level PWM Operation of Modular Multilevel Converter, IEEE International Symposium on Industrial Electronics (ISIE), Santa Clara, USA
  • Lammers, S.; Adam, G.; Schmid, H. J.; Mrozek, R.; Oberacker, R.; Hoffmann, M. J.; Quattrone, F.; Ponick, B. (2016): Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine, 6th International Electric Drives Production Conference (EDPC), Nuremberg, 2016
  • Lücke, S.; Koupeny, J.; Mertens, A. (2016): Induction Machine Speed Tracking Based on Rotor Slot Harmonics Using a Modified PLL Approach , 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016
  • Mertens, A.; Steinbrink, J. (2016): Generator-Umrichter-Prüfstand zur Untersuchung elektrischer Energiewandler in Antriebssträngen, ETG Mitgliederinformationen 2/2016, pp. 4-5
  • Misir, O.; Görsdorf, J.; Ponick, B. (2016): Determination of the Inductances of a Salient Pole Synchronous Machine Based on the Voltage Equation of a Single Damper Loop23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 470-475
  • Misir, O.; Potoniec, A.; Ponick, B. (2016): Calculation of the Damper Winding Inductances of a Synchronous Machine, The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), Glasgow, Scotland
  • Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R., Ponick, B. (2016): Calculation Method of Three-Phase Induction Machines equipped with Combined Star-Delta Windings, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, pp. 168-174
  • Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Dependency of the Lifetime Estimation of Power Modules in Fully Rated Wind Turbine Converters on the Modelling Depth of the Overall System, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016
  • Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor Frequencies, TORQUE 2016, München, Germany, 5.-7. Oktober 2016
  • Movagharnejad, H.; Mertens, A. (2016): Design Optimization of Various Contactless Power Transformer Topologies for Wireless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September
  • Müller-Deile, F.; Heseding, H.; Ponick, B.; Mertens, A. (2016): Bezahlbare elektrische Reichweite durch Modularität,Deutsches Ingenieurblatt 5-2016, pp. 54-60
  • Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles & International Transportation Electrification Conference, Toulouse, Frankreich, 02.-04. November 2016
  • Oelkers, F., Weber, B., Mertens, A. (2016): Oversampling Based Approach for Open Circuit Fault Detection in PMSM Drive Systems, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016
  • Quattrone, F.; Ponick, B. (2016): Evaluation of a Permanent Magnet Synchronous Machine with a Rotor Coil for Improved Self-Sensing Performance at Low Speed, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, 2016
  • Rogge, T.; Daub, U.; Ebrahimi, A.; Schneider, U. (2016): Der interdisziplinäre Entwicklungsprozess von aktiv angetriebenen, körpergetragenen Exoskeletten für die oberen Extremitäten am Beispiel des Stuttgart Exo-JacketZweite interdisziplinäre Konferenz zum Thema „Technische Unterstützungssysteme, die die Menschen wirklich wollen“, Hamburg, 2016
  • Sommer, C.; Kortazar, I.; Larrazabal, I.; Mertens, A. (2016): Analytical Investigation of the Three-Phase Single Active Bridge for Offshore Applications 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe)
  • Tappe, S.; Dörbaum, M.; Kotlarski, T.; Ponick, B.; Ortmaier, T. (2016): Kinematics and Dynamics Identification of a Hyper-Redundant, Electromagnetically Actuated Manipulator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016
  • Ullrich, B.; Mertens, A. (2016): Temperature estimation for wire bondings in power semiconductor devices, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016
  • Vip , S.-A. ; Weber, J.-N., Rehfeldt, A. ; Ponick, B. (2016): Rotary Transformer with Ferrite Core for Brushless Excitation of Synchronous Machines International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016
  • von Hofen, M.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2016): Hybrid offshore HVDC converter with diode rectifier and Modular Multilevel Converter, 2016 IEEE 7th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Vancouver, BC, 2016, pp. 1-7.
  • Weber, B.; Brandt, T.; Mertens, A. (2016): Compensation of switching dead-time effects in voltage-fed PWM inverters using FPGA-based current oversamplingApplied Power Electronics Conference and Exposition (APEC)
  • Weber, J.-N., Rehfeldt, A. ; Vip , S.-A. ; Ponick, B. (2016): Rotary Transformer with Electrical Steel Core for Brushless Excitation of Synchronous Machines International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 04.-07. September 2016
  • Zulk, S.; Köneke, T.; Mertens, A. (2016): Analytical Modeling of Plate Fin Heat Sinks for Natural Convection Cooling in Power Electronics, IEEE 13th Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, 17-.-20. Oktober 2016
  • Dietz, R., Mertens, A.  (2015): Extended Power Control for Distributed Generation Units17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-9
  • Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T. ; Mertens, A.; Ponick, B. (2015): Simulation and Measurement on a Novel Electromagnetic Tilting ActuatorVDI Mechatroniktagung 2015, Dortmund, Germany, 12.-13. März 2015
  • Dörbaum, M.; Weber, S.; Strempel, J.; Winkel, T.; Mertens, A.; Ponick, B. (2015): Comparison of two alternative power supply strategies for an electromagnetic tilting actuatorInnovative Small Drives and Micro-Motor Systems (IKMT), 10. ETG/GMM-Fachtagung, Koeln, Germany, 14.-15. September 2015, pp. 71-76
  • Dück, P.; Jürgens, J.; Ponick, B. (2015): Calculation of Synchronous Reluctance Machines Used as Traction DrivesIEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-5
  • Friebe, J.; Meinhardt, M. (2015): Future Challenges of Power Electronics for PV-InvertersPCIM 2015, Nürnberg, Germany, 19.-21.05.2015
  • Guseva, A.; Hoffmann, M.; Unger, A.; Zulk, S.; Amien, M.; Sarradj, E.; Kupnik, M. (2015): Ultrasonic Transducer Characterization in Air Based on an Indirect Acoustic Radiation Pressure MeasurementIEEE International Ultrasonic Symposium (IUS), Taipei, Taiwan, 21.-24. Oktober 2015, pp. 1-4
  • Jürgens, J.; Winter, O.; Fricassè, A.; Ponick, B. (2015): Influences of Iron Loss Coefficients Estimation on the Prediction of Iron Losses for Variable Speed MotorsIEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015
  • Jürgens, J; Ponick, B. (2015): Eignung von synchronen Reluktanzmaschinen und permanenterregten Synchronmaschinen ohne Seltenerdmagnete als Fahrzeugantriebe17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015
  • Kaczorowski, D.; Michalak, B.; Mertens, A.  (2015): A Novel Thermal Management Algorithm for Improved Lifetime and Overload Capabilities of Traction Converters17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10
  • Karwatzki, D.; Baruschka, L.; Kucka, J.; Mertens, A. (2015): Current Control and Branch Energy Balancing of the Modular Multilevel Matrix Converter IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015
  • Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Survey on the Hexverter topology — A modular multilevel AC/AC converter9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp.1075-1082
  • Koupeny, J.; Lücke, S.; Mertens, A. (2015): Observer-Based Online Parameter Estimation of Squirrel-Cage Induction Machines Based on the Gradient Descent Method17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10
  • Koupeny, J.; Siebrecht, M.; Lücke, S.; Mertens, A. (2015): Observer-Based Online Parameter Estimation of Doubly Fed Induction Generators Based on the Gradient Descent MethodInternational ETG Congress 2015 - die Energiewende, Bonn, Germany, 17.-18. November 2015
  • Krone, T.; Xu, C.; Mertens, A. (2015): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power SemiconductorsIEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 2715-2722
  • Krupp, H., Mertens, A. (2015): Rotary Transformer Design for Brushless Electrically Excited Synchronous MachinesIEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6
  • Kucka, J.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Improved Modular Multilevel Converter Topology with Magnetically Coupled Branch InductorsIEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 3593-3600
  • Kucka, J.; Karwatzki, D.; Mertens, A. (2015): Optimised Operating Range of Modular Multilevel Converters for AC/AC Conversion with Failed ModulesEuropean Conference on Power Electronics and Applications (EPE’2015 ECCE-Europe), Geneva, Switzerland
  • Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Salient-Pole Synchronous Machine without Damper Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 10th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Guarda, Portugalpp. 117-123
  • Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Synchronous Machine with Unsymmetrical Stator Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 18th International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, SlovakiaInternational Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, pp. 306-311
  • Oelkers, F.; Krone, T.; Rosen, A.; Mertens, A. (2015): Implementation and Test of a Fault-Tolerant Wheel Hub Drive System for an Electric VehicleIEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6
  • Oelkers, F.; Rosen, A.; Mertens, A. (2015): Model-based Approach for Sensor Fault-tolerant Drive Systems17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10
  • Quattrone, F.; Ponick, B.  (2015): Active Differential Inductance Control of Permanent MagnetIEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-7
  • Quattrone, Francesco; Ponick, Bernd; Fricke, Torben (2015): Influence of punch edges on the self-sensing capabilities of permanent magnet synchronous machines with different rotor topologiesElectric Drives Production Conference (EDPC), Nuremberg, Germany, 15.-16. September 2015, pp.1-4
  • Rosen, A,; Groninger, M.; Mertens, A. (2015): Modeling and optimized control of fault-tolerant H-bridge fed multiphase drives17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-6
  • Stübig, C.; Seibel, A.; Schleicher, K.; Haberjan, L.; Kloepzig, M.; Ponick, B. (2015): Electromagnetic Design of a 10 MW Permanent Magnet Synchronous Generator for Wind Turbine ApplicationIEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015
  • Tappe, S.; Dörbaum, M.; Mertens, A.; Ponick, B.; Kotlarski, J.; Ortmaier, T. (2015): The Kinematic Synthesis of a Spatial, Hyper-Redundant System based on Binary Electromagnetic Actuators6th International Conference on Automation, Robotics and Applications (ICARA 2015), Queenstown, New Zealand,17.-19. Februar 2015, pp. 211-216
  • Weber, B.; Wiedmann, K.; Mertens, A. (2015): Increased Signal-to-noise Ratio of sensorless control using current oversampling9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp. 1129-1134
  • Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Dynamic Behavior of the Doublegenerator System for Hydraulic Power PlantsPower Electronics for Distributed Generation Systems (PEDG), 2015 IEEE 6th International Symposium on, Aachen, Germany, 22.-25. Juni 2015, pp. 1-7
  • Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Modeling of a Novel Speed Variable Generator System for Hydroelectric Power PlantsInternational Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe), Nürnberg, Germany, pp. 1-10
  • Zulk, S.; Mertens, A. (2015): Characterization of Dead Time Effects for Common-Mode-Reducing Modulation MethodsIEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6
  • C. Sommer, A. Merkert, A. Mertens (2014): A New Control Method for Minimizing the DC-Link Capacitor Current of HEV Inverter SystemsIEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp.1188-1193
  • D. Karwatzki, L. Baruschka, J. Kucka, M. von Hofen, A. Mertens (2014): Improved Hexverter Topology with Magnetically Coupled Branch InductorsEPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10
  • D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Branch Energy Control for the Modular Multilevel Converter HexverterEnergy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp.1613-1622
  • D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Optimised Operation Mode for the Hexverter Topology Based on Adjacent Compensating PowerEnergy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5399-5406
  • D. Karwatzki, M. von Hofen, L. Baruschka, A. Mertens (2014): Operation of Modular Multilevel Matrix Converters with Failed Branches40th Annual Conference of IEEE Industrial Electronics Society (IECON 2014), Dallas, TX, USA, pp. 1650-1656
  • Ebrahimi, A.; Fabian, M. (2014): Verification of electrical drives and validation of their dynamic performance in rehabilitation equipmentInternational Conference on Orthopädie and REHA, Leipzig, Germany, 2014
  • Ebrahimi, A.; Minzenmay, D.; Budaker, B.; Schneider, U. (2014): Bionic Upper Orthotics with integrated EMG sensory23rd IEEE International Symposium on Robot and Human interactive Communication, Edinburgh, Scotland, 2014
  • Emmrich, K. (2014): Energieeffizienz - im System ggf. ganz anders, als es die Komponente verspricht13. Technischer Tag der VEM-Gruppe, Wernigerode, Germany, 30. September 2014
  • F. Boseniuk and B. Ponick (2014): Parameterization of transient thermal models for permanent magnet synchronous machines exclusively based on measurementsPower Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on. IEEE, pp. 295-301
  • F. Fuchs and A. Mertens (2014): Prediction and Avoidance of Grid-Connected Converter's Instability caused by Wind Park Typical, Load-Varying Grid ResonanceEnergy Conversion Congress and Exposition (ECCE), IEEE 14-18 Sept., Pittsburgh, PA, USA, pp. 2633-2640
  • F. Fuchs, R. Dietz, S. Garske, T. Breithaupt, A. Mertens, L. Hofmann (2014): Challenges of grid integration of distributed generation in the interdisciplinary research project Smart NordIEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), pp. 1-7
  • Groninger, M.; Horch, F.; Kock, A,; Jakob, M.; Ponick, B (2014): Cast Coils for Electrical Machines and their Application in Automotive and Industrial Drive Systems4th International Electric Drives Production Conference (EDPC 2014), Nürnberg, Germany, 30. September - 1. October, pp. 1-7
  • Hinze, J.; Zacharias, P.; Araujo, S.; Friebe, J.; Leifert, T. (2014): Power Semiconductor Packaging in PV Inverters up to 30kW power, a difficult choiceCIPS 2014, Nürnberg, Germany, 25.-27.02.2014
  • J. Jürgens, A. Brune, B. Ponick (2014): Electromagnetic design and analysis of a salient-pole synchronous machine with tooth-coil windings for use as a wheel hub motor in an electric vehicle XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 744-750
  • John, M.; Mendoza-Araya, P.A.; Venkataramanan, G. (2014): Small signal impedance measurement in droop controlled AC microgridsIEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 702-709
  • K. Emmrich, A. Brune, B. Ponick (2014): Evaluation of an analytical, efficiency-optimized torque-speed characteristic of induction machines coupled with a thermal-electromagnetic energy consumption calculationXXIth International Conference on Electrical Machines (ICEM), Berlin, pp. 762-767
  • Kock, A.; Gröninger, M.; Mertens, A. (2014): Modeling and Optimized Control of Fault-tolerant Drive Topologies for Electric Vehicle ApplicationsXXIst International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 2372-2379
  • Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2014): Universelles Werkzeug zur Steigerung der Energieeffizinz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer AntriebstechnikSIMPEP-Kongress Koblenz, 17.-19. September 2014
  • Koupeny, J.; Mertens, A. (2014): Offline and Online Parameter Estimation of Controlled Electric DrivesSymposium with the Institute of Thermomechanics of the Academy of Sciences, Prague, Czech Republic, Sept. 2014
  • L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): A New Modular Multilevel AC/DC Converter Topology Applied to a Modular Multilevel DC/DC ConverterEPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10
  • L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): Low-speed Drive Operation of the Modular Multilevel Converter Hexverter Down to Zero FrequencyEnergy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5407-5414
  • M. Wehner and B. Ponick (2014): Search coil systems for early fault detection in wind turbine generators2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Ischia, Italy, 18.-20. Juni 2014, pp. 273-278
  • Misir O.; Ponick B. (2014): Analysis of Three-Phase Induction Machines with Combined Star-Delta WindingsIEEE 23rd International Symposium on Industrial Electronics (ISIE), Istanbul, Turkey, 1.-4. Juni 2014, pp. 756-761
  • O. Korolova, P. Dück, A. Brune, J. Jürgens, B. Ponick (2014): Prediction of Efficiency-optimized Salient-pole Synchronous Machines’ Operating Range Using a Coupled Numerical-Analytical MethodXXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 871-876
  • T. Krone, T. Koneke, A. Mertens (2014): System design for junction temperatures up to 200°C16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), Lappeenranta, Finland, 26.-28. August 2014, pp. 2238-2245
  • Weber, S.; Merkert, A.; Mertens, A. (2014): Gate driver for safe operation of depletion mode SiC JFETsIEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 5716-5722
  • Budaker, B.; Ebrahimi, A. (2013): Electric motors in wearable rehabilitation devices3rd International Electric Drives Production Conference, Nuremberg, Germany, 2013
  • Dörbaum, M.; Juris, P.; Stübig, C.; Ponick, B. (2013): Design of High-Speed Motors with a High Power Range for Use in Future AircraftsPCIM Europe 2013, Nuremberg, Germany, pp. 89-96
  • Dreher, F.; Ebrahimi, A.; Parspour, N. (2013): Balancing torque loss and cogging reduction at PM transverse flux machines segmented stator phasesInternational Conference on power conversion and intelligent motion, PCIM, Nuremberg, Germany, 2013
  • Dück, P.; Ponick, B. (2013): Einfluss unterschiedlicher Regelungsstrategien auf das Betriebsverhalten und den Wirkungsgrad von permanentmagneterregten SynchronmaschinenETG Kongress, Berlin, Deutschland
  • Ebrahimi, A.; Dreher, F.; Parspour, N. (2013): Sensorless direct torque control of transverse flux machines with hybrid flux conductionInternational Conference on power conversion und intelligent motion, PCIM, Nuremberg, Germany, 2013
  • Ebrahimi, A.; Maier, M.; Parspour, N. (2013): Analysis of Torque Behavior of Permanent Magnet Synchronous Motor in Field-Weakening OperationPower and Energy Conference at Illinois (PECI), IEEE Conference Publications, USA, 2013, 120-124
  • Ebrahimi, A.; Parspour N. (2013): Modified Analytical Modeling of Surface Mounted Permanent Magnet Synchronous Motor- Design and Prototype TestsInternational Conference on power engineering, energy and electrical drives, IEEE Conference Publications, Istanbul, Turkey, 2013
  • Ebrahimi, A.; Parspour, N.; Fabian, M. (2013): Design and Qualitative Thermographic Comparison of Different Power Inverter Packaging4th International conference on power engineering, energy and drives, IEEE Conference Publications, Istanbul, Turkey, 2013.
  • Emmrich, J.; Ponick, B.; Bickel, W.; Denkena, B. (2013): Analysis of an integrated electromagnetic actuator prototypeInnovative Klein- und Mikroantriebstechnik (GMM-FB 76), Nürnberg
  • Fuchs, F.; Pham, D.V.; Mertens, A (2013): Einfluss der Netzimpedanz auf die Dynamik der netzseitigen Stromregelung am Beispiel einer WindenergieanlageETG Kongress, Berlin
  • Fuchs, F.; Pham, D.V.; Mertens, A. (2013): Stabilität der Stromregelung eines Netzpulsstromrichters für Vollumrichterwindenergieanlagen in Abhängigkeit der WindparkkonfigurationETG Kongress
  • Fuchs, F; Pham, D.V.; Mertens, A. (2013): Analysis of Grid Current Control in Consideration of Voltage Feedforward and Cable Capacitance Demonstrated on a Fully Sized Wind Turbine Installed in a Wind ParkIEEE Energy Conversion Congress & Expo, Denver, Colorado, USA
  • Hofen, M. v.; Baruschka, L.; Karwatzki, D.; Mertens, A. (2013): Comparison of Modular Multilevel Converters for the Grid Connection of Large-Scale Wind TurbinesWind Integration Workshop, London
  • Hofmann, K.; Herold, C.; Beier, M.; Lutz, J.; Friebe, J. (2013): Reliability of discrete power semiconductor packages and systems – D²Pak and CanPAK in comparisonEPE 2013, Lille, France, 03.-05.09.2013
  • Karimi, R.; Koeneke T.; Kaczorowski, D.; Werner, T.; Mertens, A. (2013): Low Voltage and High Power DC-AC Inverter Topologies for Electric VehiclesECCE 2013, Denver, Colorado, USA
  • Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer AntriebssystemeETG Kongress, Berlin
  • Meyer, R.; Zlotnik, A.; Mertens, A. (2013): Fault Ride Through Control of Medium-Voltage Converters with LCL Filter in Distributed Generation SystemsIEEE Energy Conversion Congress and Exposition (ECCE), Denver, CO, United States
  • P. Juris, A. Brune, S. Tegeler, B. Ponick (2013): Einfluss der Magnetmaterialien auf die Energieeffizienz elektrischer Fahrzeugantriebe für verschiedene FahrzyklenETG Kongress, Berlin
  • Tegeler, S.; Ponick, B. (2013): Einfluss der Schrägung auf die Ummagnetisierungsverluste bei DrehfeldmaschinenETG Kongress
  • Teichel, S.; Dörbaum M.; Ponick, B.; Seume, J. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations, SFB 880 - Fundamentals of high-lift for future commercial aircraftBiennial Report - Forschungsbericht 2013-03, TU Braunschweig, pp. 122-134
  • Wöhrmann, M.; Dörbaum, M.; Ponick, B.; Mertens, A. (2013): Design of a Fully Actuated Electromagnetic Bending Actuator for Endoscopic Applications9. GMM/ETG-Fachtagung Innovative Small Drives and Micro-Motor Systems (IKMT), Nuremberg, pp. 152-157
  • Yavuz, S.; Parspour, N.; Ebrahimi, A. (2013): Design of a Switched Reluctance Machine as a Near-Wheel Motor for Electric VehiclesInternational Conference on power conversion und intelligent motion, PCIM, Nuremberg, Germany, 2013
  • A. Brune, P. Dück, A. Kock, M. Gröninger and B. Ponick (2012): Evaluation of an Efficiency-optimized Calculation of PM Synchronous Machines’ Operating Range Using Time-saving Numerical and Analytical CouplingVehicle Power and Propulsion Conference (VPPC), Seoul, Südkorea
  • Dreher, F.; Ebrahimi, A.; Parspour, N. (2012): Optimizing the control behavior of Transverse Flux Machines by the use of hybrid flux conductionInternational Conference and Exposition on Electrical and Power Engineering (EPE), IEEE Conference Publications, Romania, 2012
  • Ebrahimi, A..; Budaker, B.; Parspour, N. (2012): Adaption of an EC‐ motor for actively controlled knee“International Conference on Orthotics and Prosthetics, Leipzig, Germany, 2012
  • Fuchs, F.; Mertens, A. (2012): Dynamic modeling of a 2 MW wind turbine for converter issues : part 1Power Electronics and Motion Control (EPE PEMC 2011 ECCE Europe), Proceedings of the 2012-15th International Conference and Expositon on, Novi Sad, Serbia
  • Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick (2012): Design of an Integrated Electromagnetic Actuator for High Frequency Damping ForcesXXth International Conference on Electrical Machines (ICEM), Marseille, Frankreich
  • Kriese, M.; Wittek, E.; Gattermann, S.; Tischmacher, H.; Poll, G.; Ponick, B. (2012): Influence of bearing currents on the bearing lifetime for converter driven machinesXXth International Conference on Electrical Machines (ICEM), pp. 1735-1739
  • Merkert, A.; Krone, T.; Mertens, A. (2012): Characterization and Scalable Modelling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-DevicesIEEE Vehicle Power and Propulsion Conference (VPPC 2012), Seoul, Korea
  • Meyer, R.; Mertens, A. (2012): Design of LCL Filters in Consideration of Parameter Variations for Grid-Connected ConvertersIEEE Energy Conversion Congress & Exposition (ECCE), Raleigh, NC, USA
  • Meyer, R.; Mertens, A. (2012): Design and Optimization of LCL Filters for Grid-Connected Converters15th International Power Electronics and Motion Control Conference (EPE-PEMC ECCE Europe), Novi Sad, Serbia
  • P. Juris, A. Brune and B. Ponick (2012): A Coupled Thermal-Electromagnetic Energy Consumption Calculation for an Electric Vehicle with Wheel Hub Drive Considering Different Driving CyclesVehicle Power and Propulsion Conference (VPPC)
  • Quattrone, F.; Lorenz, R.D (2012): Dynamic modeling of losses in electrical machines for active loss controlEnergy Conversion Congress and Exposition (ECCE), pp.47-52
  • Sonnenschein, M.; Appelrath, H.-J.; Hofmann, L.; Kurrat, M.; Lehnhoff, S.; Mayer, C.; Mertens, A.; Uslar, M.; Nieße, A.; Tröschel, M. (2012): Dezentrale und selbstorganisierte Koordination in Smart Grids VDE-Kongress 2012 Smart Grid Intelligente Energieversorgung der Zukunft
  • Stuebig, C.; Ponick, B. (2012): Practical Experiment for Students: Winding an Induction Machine20th International Conference on Electrical Machines (ICEM), Marseille, Frankreich
  • Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines for the Entire Speed Range with Reduced Computational Effort based on a Novel MRAS ApproachPower Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on
  • Wiedmann, K; Mertens, A (2012): Novel MRAS Approach for Online Identification of Key Parameters for Self-Sensing Control of PM Synchronous Machines15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe
  • Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines Including Online System Identification Based on a Novel MRAS Approach3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI
  • Wittek, E.; Kriese, M.; Tischmacher, H.; Gattermann, S.; Ponick, B.; Poll, G. (2012): Capacitance of bearings for electric motors at variable mechanical loadsXXth International Conference on Electrical Machines (ICEM), pp. 1602-1607
  • Yanhui, X.; Vollmer, U.; Ebrahimi, A.; Parspour, N. (2012): Online estimation of the stator resistances of a PMSM with consideration of magnetic saturationInternational Conference and Exposition on Electrical and Power Engineering (EPE), IEEE Conference Publications, Romania, 2012
  • Al Nahlaoui, Braunisch, Eichinger, Kulig, Ponick (2011): Calculation Methods for Electromagnetically Exited Noise in Induction MotorsEDPC2011
  • Baruschka, L.: Mertens, A. (2011): A New 3-Phase Direct Modular Multilevel Converter, EPE European Conference on Power Electronics and Applications(EPE 2011), Birmingham, UK, 2011
  • Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge and Modular Multilevel Converters for BESS ApplicationIEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA
  • Baruschka, L.; Mertens, A. (2011): Untersuchung Modularer Multilevel-Topologien zur Netzanbindung von BatteriespeichernETG-Kongress 2011, Würzburg
  • Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge Converters and Modular Multilevel Converters for the use in Medium Voltage Grid Connected Battery Energy Storage SystemsThe 21st International Conference and Exhibition on Electricity Distribution (CIRED 2011), Frankfurt/Main
  • Baruschka, L.; Mertens, A. (2011): A New 3-Phase AC/AC Modular Multilevel Converter with Six Branches in Hexagonal ConfigurationIEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA
  • Brune, E.; Stübig, C.; Tegeler, S.; Wehner, M.; Ponick, B. (2011): Kopplung numerischer und analytischer Verfahren zur Berechnung von permanenterregten Synchronmaschinen mit AnlaufkäfigETG Würzburg
  • Dang, L.; Kuhn, H.; Mertens, A. (2011): Digital Adaptive Driving Strategies for High-Voltage IGBTsIEEE Energy Conversion Congress and Exposition, (ECCE 2011), Phoenix, AZ, USA
  • Fuchs,F.; Mertens, A. (2011): Steady State Lifetime Estimation of the Power Semiconductors in the Rotor Side Converter of a 2 MW DFIG Wind Turbine via Power Cycling Capability Analysis14th European Conference on Power Electronics and Applications 2011, EPE 2011, September 2011, Birmingham, United Kingdom
  • Gröninger, M., Horch, F., Kock, A., Pleteit, H., Ponick, B., Schmidt, D., Wöstmann, F.-J. (2011): Casting Production of Coils for electrical MachinesElectric Drives Production Conference Nürnberg
  • Jae Suk Lee; Wei Xu; Hurst, Z.; Bradley, B.; Quattrone, F.; Lorenz, R.D. (2011): Time optimal torque control and loss minimization in AC machines using deadbeat direct torque and flux controlElectrical Machines and Systems (ICEMS), pp.1-6
  • Janssen, G., Wiedmann, K., M. v. Hofen, Mertens, A., Ponick, B. (2011): Entwicklung von Antriebssystemen basierend auf elektromagnetische MikromotorenKolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11.-12. Oktober 2011 in Karlsruhe
  • Jastrzembski, Ponick (2011): Design of a Conveyor Directly Driven by a Hybrid Linear Motor following FEM and Reluctance Network ApproachLDIA 2011, Eindhoven (Holland)
  • Köneke T., Mertens A., Domes D., Kanschat P (2011): Highly Efficient 12kVA Inverter with Natural Convection Cooling Using SiC SwitchesPCIM Europe 2011, Nuremberg, Germany
  • Meyer, R.; Mertens, A. (2011): Auslegung eines LCL Filters für Umrichter mit niedriger Schaltfrequenz in dezentralen ErzeugungsanlagenETG Kongress 2011, Würzburg
  • Radosavac, Froböse, Overmeyer, Jastrzembski, Ponick (2011): Lineardirektantrieb für TransportbänderWGTL Kolloqium 2011, Hannover
  • Averberg, A.; Tran, H. N. ; Nguyen, C. Q. ; Mertens A. (2010): Two-Stage Interleaved Power Conditioner for Connecting a 5 kW el. SOFC with a 750 V DC Link The 2010 International Power Electronics Conference - ECCE Asia (IPEC 2010), Sapporo, Japan
  • Brune A., Dempewolf K.-H., Ponick B. (2010): Modelling and FE Parameter Identification of Permanent Magnet Synchronous Machines in Consideration of Spatial HarmonicsXIX International Conference on Electrical Machines ICEM 2010, Rom
  • E. Wittek, M. Kriese, H. Tischmacher, S. Gattermann, B. Ponick, G. Poll (2010): Capacitances and lubricant film thicknesses of motor bearings under different operating conditions ICEM 2010 (Rom)
  • Fuchs, F. Dannehl, J. Fuchs, F. W. (2010): Discrete Sliding Mode Current Control of Grid-Connected Three-Phase PWM Converters with LCL FilterIEEE International Symposium on Industrial Electronics 2010 - 04-07 July, Bari, Italien
  • Janssen, G., Waldschik, A., Büttgenbach, S., Ponick, B. (2010): Entwurf und Simulation eines rotatorischen Mikroreluktanzschrittmotors, Innovative Klein- und Mikroantriebstechnik124, 8.ETG/GMM-Fachtagung am 23. September in Würzburg, VDE Verlag GmbH Berlin, ISBN 978-3-8007-3301-9, 2010, S.93-98
  • Jastrzembski, Ponick (2010): Different Methods for Reducing Detent Force in a Permanent Magnet Linear Synchronous MotorIECON 2010, Phoenix, Arizona (USA)
  • Jastrzembski, Ponick (2010): Diffrent Methods for Reducing Detent Force in a Permanent Magnet Linear Synchronous MotorIECON 2010, Phoenix, Arizona (USA)
  • Köneke, T.; Merkert, A.; Mertens, A. (2010): System based optimization of the chip size and the thermal path for Si and SiC semiconductors 6th International Conference on Integrated Power Electronic Systems, Nürnberg
  • Kriese, Wittek, Tischmacher, Gattermann (2010): Prediction of Motor Bearing Currents for Converter OperationICEM 2010, Rome (Italy)
  • R. Helmer, P. Dück, B. Ponick (2010): Determination of Transient Reactances of Salient Pole Synchronous Machines with Analytical and Numerical Methods. Speedam 2010, Pisa, Italy
  • Rüger, Schnick, Mertens, Mathis (2010): Novel PWM Modulation Strategy for 3-phase Inverters with Reduced Distortion at Low Switching FrequencyIECON 2010, Phoenix, Arizona (USA)
  • Stübig, C. ; Ponick, B. (2010): Berechnung von Hybridschrittmotoren8. ETG/GMM-Fachtagung Innovative Klein- und Mikroantriebstechnik, Würzburg, 23. September 2010
  • Tischmacher, Gattermann, Kriese, Wittek (2010): Bearing Wear Caused by Converter-Induced Bearing Currents IECON 2010, Phoenix, Arizona (USA)
  • Averberg, A.; Meyer, K.R.; Mertens, A. (2009): Design Considerations of a Current-fed DC-DC Converter with High Voltage Gain for Fuel Cell Applications,EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009
  • Froböse, Jastrzembski, Overmeyer, Ponick (2009): Modellierung eines Lineardirektantriebes für TransportbänderWGTL-Kolloqium 2009, Illmenau
  • Jastrzembski, Froböse, Ponick, Overmeyer (2009): Direktantrieb eines Förderbandes durch einen permanentmagnet erregten Synchron-Linear-MotorETG-Kongress 2009, Düsseldorf
  • Jastrzembski, Ponick (2009): Design of a Novel Direct Driven Conveyor by a Linear Synchronous MotorIECON 2009, Porto, Portugal
  • Kuhn, H.; Mertens, A. (2009): On-line Junction Temperature Measurement of IGBTs based on Temperature Sensitive Electrical Parameters,EPE 13th European Conference on Power Elektronics and Applications (EPE2009), Barcelona, Spain, 08.-10.09.2009
  • Ponick, B (2009): Miniaturisation of Electrical MachinesISTET'09, Lübeck, pp. 1-4
  • Ponick, B.; Jastrzembski, J.-P. (2009): Neuartiger Linear-Direktantrieb für Transportbänder,8. Technischer Tag der VEM-Gruppe, Wernigerode
  • Tegeler, S.; Helmer, R.; Ponick, B. (2009): Saturation Behaviour of Doubly-fed Induction Generators, European Wind Energy Conference & Exhibition 2009, Parc Chanot, Marseille, France 16 – 19 March 2009
  • Waldschik, A.; Feldmann, M.; Wiedmann, K.; Janssen, G.; Ponick, B.; Mertens, A.; Büttgenbach, S. (2009): Funktionelle Komponenten für einen linearen Reluktanzschrittmotor,Mikrosystemtechnik-Kongress 2009, Berlin, 2009
  • Wiedmann, K.; Wallrapp, F.; Mertens, A. (2009): Analysis of Inverter Nonlinearity Effects on Sensorless Control for Permanent Magnet Machine Drives based on High-Frequency Signal Injection,EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009
  • Averberg, A.; Mertens, A. (2008): Characteristics of the Single Active Bridge Converter with Voltage Doubler
  • Averberg, A.; Meyer, K.R.; Mertens, A. (2008): Current-fed Full Bridge Converter for Fuel Cell Systems
  • Averberg, A.; Meyer, K.R.; Nguyen, C.Q., Mertens, A. (2008): A Survey of Converter Topologies for Fuel Cells in the kW Range
  • Garbe, E.; Helmer, R.; Ponick, B. (2008): Modelling and fast calculating the characteristics of synchronous machines with the finite element method
  • Helmer, R.; Wang, D.; Ponick, B. (2008): Investigation of Part Winding Start Used in Cage Induction Motors
  • Janssen, G., Traisigkhachol, O., Gatzen, H.H., Ponick, M.: (2008): Design and Fabrication of a Rotary Micro Synchronous MotorProc. Actuator 2008, Bremen, Germany, pp. 457-460
  • Kuhn, H.; Koneke, T.; Mertens, A. (2008): Potential of digital gate units in high power applications IEEE Power Electronics and Motion Control Conference (EPE-PEMC 2008), Poznan, Poland, 2008, page(s): 1458-1464
  • Kuhn, H.; Köneke, T.; Mertens, A. (2008): Considerations for a Digital Gate Unit in High Power Applications
  • Laczynski, T.; Mertens, A. (2008): Predictive stator current control for three-level voltage-source inverters with output LC-filters;EPE-PEMC 2008, Poznan, Polen, Page(s):569-575
  • Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulation Error Control for Medium Voltage Drives with LC-Filters and Synchronous Optimal Pulse Width ModulationIAS 2008, Edmonton, Kanada, Page(s): 1-7
  • Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulationsfehlerregelung für Mittelspannungsantriebe mit LC-Filtern und offline optimierter Pulsdauermodulation
  • Laczynski, T.; Werner, T.; Mertens, A. (2008): Energy-based modulation error control for high-power drives with output LC-filters and synchronous optimal pulse width modulation
  • Laczynski, T.; Werner, T.; Mertens, A. (2008): Active Damping of LC-Filters for High Power Drives using Synchronous Optimal Pulsewidth Modulation
  • Mertens, A.; Skudelny, H.-Ch. (2008): Switching Losses in a GTO Inverter for Induction Heating
  • Rüger, N.E.; Schnick, O.; Mathis, W.; Mertens, A. (2008): New Modulation Strategy with Low Switching Frequency and Minimum Baseband Distortion
  • Schnick, O. ; Rüger, N. E. ; Mertens, A. ; Mathis, W. (2008): New Modulation Strategy for Controlled Power Electronic Applications with Low Switching Frequencies
  • Stuebig, C.; Ponick, B. (2008): Determination of Air Gap Permeances of Hybrid Stepping Motors for Calculation of Motor Behaviour 18th International Conference on Electrical Machines (ICEM), Vilamoura, Portugal, 06.-09.09.2008
  • Zacharias, P.; Menezes, L.M.; Friebe, J. (2008): 2 New Topologies for Transformerless Grid Connected PV-Systems with Minimum Switch NumberPCIM 2008, Nürnberg, Germany, 27.-29.05.2008
  • Averberg, A.; Mertens, A. (2007): Design Considerations of a Voltage-fed Full Bridge DC-DC Converter with High Voltage Gain for Fuel Cell Applications
  • Averberg, A.; Mertens, A. (2007): Analysis of a Voltage-fed Full Bridge DC-DC Converter in Fuel Cell Systems
  • Demmig, S.; Gehrking R.; Wiedmann, K.; Ponick, B.; Mertens A. (2007): Positionsregelung eines elektromagnetischen Mikrolinearmotors
  • Demmig, S.; Gehrking, R.; Wiedmann, K.; Mertens, A.; Ponick, B. (2007): Design and Control of a Micro Linear Motor with Integrated Magnetic Guidance
  • Dempewolf, K.-H.; Getschmann, T.; Rüger, N.E.; Ganesan, V.A.; Mertens, A.; Ponick, B. (2007): Transiente Simulation eines Antriebssystems zur Bestimmung der frequenzabhängigen Verluste in schnelllaufenden permanentmagneterregten Synchronmaschinen
  • Dempewolf, K.-H.; Ponick, B. (2007): Modelling of Permanent Magnet Synchronous Machines for Simulations of Transient Phenomena
  • Gehrking R.; Demmig S.; Feldmann M.; Waldschi A.; Büttgenbach S.; Ponick B. (2007): Charakterisierung eines elektromagnetischen Mikrolinearmotors mit integrierter magnetischer Führung
  • Gehrking, R.; Demmig, S.; Mertens, A.; Ponick, B. (2007): Investigations on a Micro Linear Stepping Motor Supplied by a DC-DC Converter
  • Kuhn, H.; Rüger, N.E.; Mertens, A. (2007): Control Strategy for Multilevel Inverter with Non-ideal DC Sources
  • Laczynski, T.; Mertens, A. (2007): New Current Controller for Inverter Fed Medium Voltage Drives with LC Filter
  • Laczynski, T.; Mertens, A. (2007): Predictive Current Controller for Inverter Fed Medium Voltage Drives with LC FilterPEDS 2007, Bangkok, Thailand, Page(s): 1496-1501
  • Rüger, N.E.; Kuhn, H.; Mertens, A. (2007): Harmonic Distortion of Multicarrier PWM Strategies in Cascaded Multilevel Converters with Unequal DC Sources
  • Wiedmann, K; Demmig, S.; Mertens, A. (2007): Modified Sliding Mode Controller for Positioning of Micro Linear Motors
  • Demmig, S.; Gehrking, R.; Feldmann, M.; Büttgenbach, S.; Ponick, B. (2006): Specific Design Rules for Micro Linear Motors
  • Gatzen, H.H.; Hahn, M.; Bedenbecker, M.; Ponick, B.; Gehrking, R.; Demmig, S. (2006): Advances in the Development of a Linear Hybrid Micro Actuator
  • Gehrking, R.; Demmig, S.; Ponick, B.; Feldmann, M.; Büttgenbach, S. (2006): A Micro Linear Motor with Integrated Passive Magnetic Guidance
  • Pöhler, S.; Mertens, A.; Sommer, R. (2006): Optimisation of Output Filters for Inverter Fed Drives
  • Ruffert C.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2006): Magnetic Levitation Assisted Guide for a Linear Microactuator
  • Demmig, S.; Gehrking, R.; Mertens, A.; Ponick, B. (2005): Simulation of the magnetic and dynamical characteristics of micro linear motors
  • Gehrking, R.; Ruffert, C.; Demmig, S.; Gatzen, H.H.; Ponick, B. (2005): Entwicklung einer magnetischen Führung für Mikroaktoren
  • Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Auslegung aktiver Mikrosysteme
  • Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design of active micro systems
  • Jacobs, J.; Averberg, A.; De Doncker, R. (2005): Multi-Phase Series Resonant DC-to-DC Converters: Stationary Investigations
  • Jacobs, J.; Averberg, A.; Schröder, S.; De Doncker, R. (2005): Multi-Phase Series Resonant DC-to-DC Converters: Transient Investigations
  • Mertens, A.; Ganesan, V. (2005): Three-Phase Sigma-Delta Modulation using Zero-Sequencs Components
  • Bartram, M.; Schrey, M.; Kuhn, H.; De Doncker, R.W. (2004): A new approach to optimize IGBT-heatspreader-combinations allows "real-time" simulation of IGBT-chip-temperature
  • Budde, T.; Hahn, M.; Föhse, M.; Edler, J., Stölting, H.-D.; Gatzen, H.H. (2004): Design, Fabrication and Characterization of a Hybrid Linear Micro Step Motor
  • Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2004): Design and Simulation of essential Parts of active Microsystems
  • Gatzen, H.H; Stölting, H.-D.; Ponick, B. (2004): Alternatives for Micro-Machined Linear Actuators
  • Jacobs, J.; Averberg, A.; De Doncker, R. (2004): A novel three-phase DC/DC converter for high-power applications
  • Stölting, H-D.; Hesselbach, J.; Becker, O.; Berardinelli, A.; Rathmann S. (2004): Robuste modellbasierte Regelung von Mikro-Reluktanzmotoren
  • Brune, K.; Seinsch, H.O.; Steinbrink, J. (2003): Conducted emission of synchronous generators and its dependence on design featuresElectrical Engineering, vol. 85, pp. 71-81
  • Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2003): Entwurf und Simulation aktiver Mikrosysteme
  • Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2003): A Batch Fabricated Linear Synchronous Motor
  • Klug, R.-D.; Mertens, A. (2003): Reliability of Megawatt Drive Concepts
  • Seidemann, V.; Edler, J.; Büttgenbach, S.; Stölting, H.-D. (2003): Linear Variable Reluctance (VR) Micro Motor with Horizontal Flux Guidance
  • Altenbernd, G. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design
  • Altenbernd, G.; Wähner, L. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design
  • Edler, J.; Föhse, M.; Gatzen, H.H.; Stölting, H.-D. (2002): Ein Antriebsteil für aktive Mikrosysteme
  • Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Design, Fabrication, and Characterization of a Miniature Linear Induction Motor
  • Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Investigations on the Pole Geometry Optimization of a Variable Reluctance Microactuator
  • Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): A Batch Fabricated Linear Synchronous Motor
  • Altenbernd, G. (2001): Kleine Asynchron-/Synchronmaschinen in der Kfz-Technik
  • Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H. H. (2001): A Linear Microactuator with Enhanced Design
  • Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H (2001): Elektromagnetischer Mikrolinearmotor
  • Jacob, A. (2001): Hybridmotor: Anwendung, Aufbau, Wirkungsweise und Berechnung
  • Mertens, A.; Sommer, R.; Schmitt, B.P. (2001): “Retrofit of fixed speed induction motors with medium voltage drive converters using NPC three-level inverter high-voltage IGBT based topology
  • Seinsch, H.O. (2001): Maßnahmen zur Unterdrückung von Lagerströmen in umrichtergespeisten Induktionsmotoren
  • Seinsch, H.O. (2001): Methoden der Motordiagnose
  • Stölting, H.-D. (2001): Mechatronik, der Motor für Innovationen in der Klein- und Mikroantriebstechnik
  • Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Present Stage of Development of the Vector Controlled Crankshaft Starter-Generator for Motor-Vehicle
  • Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Vector Controlled Crankshaft Starter-Generator for Motor Vehicle
  • Gatzen, H. H.; Stölting, H.-D.; Büttgenbach, S.; Dimigen, H. (2000): A Novel Variable Reluctance Micromotor for Linear Actuation
  • Hausberg, V.; Seinsch, H.O. (2000): Wellenspannungen und zirkulierende Lagerströme bei umrichtergespeisten InduktionsmaschinenElectrical Engineering, vol. 82, pp. 313-326
  • Hausberg, V.; Seinsch, H.O. (2000): Schutzmaßnahmen gegen Lagerschäden umrichtergespeister MotorenElectrical Engineering, vol. 82, no. 6, pp. 339-345
  • Kleen, S.; Ehrfeld, W.; Michel, F.; Stölting, H.-D. (2000): Penny-Motor: A Family of Novel Ultraflat Electromagnetic Micromotors
  • Mertens, A.; Sommer, R.; Brunotte, C. (2000): Applications of Medium Voltage Drives with IGBT Three-Level Inverters
  • Sommer, R.; Mertens, A.; Brunotte, C.; Trauth, G. (2000): Medium Voltage Drive System with NPC Three-Level Inverter using IGBTs
  • Sommer, R.; Mertens, A.; Klaassen, N. (2000): Three-level Medium Voltage Inverter using IGBTs
  • Stölting, H.D. (2000): Small Electromagnetic Disk Drives
  • de Wit, B.; Kleiner, F.; Ponick, B. (1999): PCIC 1999 (General Session) und IEEE IAS 2000
  • Mertens, A.; Bruckmann, M.; Sommer, R. (1999): Medium Voltage Inverter using High Voltage IGBTs
  • Sommer, R.; Mertens, A.; Griggs, M.; Conraths, H.-J.; Bruckmann, M.; Greif, T. (1999): New Medium Voltage Drive Systems using Three-Level Neutral Point Clamped Inverter with High Voltage IGBT
  • Bakran, M.; Marquardt, R.; Mertens, A.; Winternheimer, S. (1997): A Novel System for Current and Voltage Sensing in Traction Converters
  • Mertens, A.; Eckardt, D. (1996): Voltage and Current Sensing in Power Electronic Converters using Sigma-Delta A/D Conversion
  • Mödl, S.; Mertens, A.; Eckardt, D.; Hauer, H. (1996): 14 bit Sigma Delta Modulator with Mulit Bit Feedback
  • Mertens, A. (1992): Performance Analysis of Three Phase Inverters controlled by Synchronous Delta-Modulation Systems
  • Mertens, A. (1991): Design of a 20 kVA Resonant DC Link IGBT Inverter on the Base of Experimental Device Evaluation
  • Mertens, A.; Skudelny, H.-Ch. (1991): Calculations on the Spectral Performance of Discrete Pulse Modulation Strategies
  • Mertens, A.; Skudelny, H.-Ch.; Caldeira, P.; Lipo, T. A. (1991): Characterization of GTOs under different Modes of Zero Current Switching
  • Venkataramanan, G.; Mertens, A.; Skudelny, H.-Ch.; Grüning, H. (1991): Switching Characteristics of Field Controlled Thyristors
  • Mertens, A.; Divan, D.M. (1990): A High Frequency Resonant DC Link Inverter using IGBTs
  • Mertens, A.; Skudelny, H.-Ch. (1989): Operation and Control Requirements for a GTO used in a Parallel Resonant Inverter for Induction Heating
  • Mertens, A.; Skudelny, H.-Ch. (1989): Switching Losses in a GTO Inverter for Induction Heating

Patentschriften

  • Helmer, R.; Ponick, B.; Steinbrink, J.; England, M. (2022): Rotor mit Kavitäten, Elektromaschine und Kraftfahrzeug, Patent Nr. DE102020214207A1
  • Lorenz, M.; Kucka J.; Mertens, A (2021): Modularer Multilevel-Umrichter, Verfahren zum Betrieb von modularen Multilevel-Umrichtern und Computerprogramm, Nummer DE102020108034B3
  • Lorenz, M.; Kucka J.; Mertens, A (2021): Modularer Multilevel-Umrichter, Verfahren zum Betrieb von modularen Multilevel-Umrichtern und Computerprogramm, Nummer DE102020108035B3
  • Friebe, J.; Buchhold, S.; Söderberg, T.; Möser, E.; Wappler, T.; Kotthaus, M. (2020): Wechselrichter mit mindestens zwei Gleichspannungsquellen, DE102018127130A1
  • Friebe, J.; Buchhold, S.; Söderberg, T.; Möser, E.; Wappler, T.; Kotthaus, M. (2020): Wechselrichter mit mindestens zwei Gleichspannungswandlern und Verwendung eines solchen Wechselrichters in einer Photovoltaikanlage, DE102018127132A1
  • Buchhold, S.; Friebe, J.; Kotthaus, M.; Möser, E.; Söderberg, T.; Wappler, T. (2019): Photovoltaic System and Inverter having a Communication Interface, WO2019/110717A1
  • Buchhold, S.; Soederberg, T.; Friebe, J.; Kotthaus, M.; Wappler, T.; Moeser, E. (2019): Wechselrichter, WO2019/115403A1
  • Friebe, J. (2019): Wechselrichter und Verfahren zum Betreiben eines Wechselrichters, DE102017123815A1
  • Friebe, J. (2019): LC-Filteranordnung und elektrisches oder elektronisches Gerät mit einer derartigen LC-Filteranordnung, DE 10 2017 131 045 A1
  • Friebe, J.; Prior, O. (2019): Vorrichtung mit einer elektrischen Einrichtung, leistungselektronischer Wandler und Verfahren zur Verbesserung einer elektromagnetischen Verträglichkeit einer elektrischen Einrichtung, DE102017131295A1
  • Friebe, J.; Prior, O.; Wappler, T. (2019): Schaltungsanordnung und leistungselektronische Wandlerschaltung, DE102017125548A1
  • Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B.; Wittenstein SE (2019): Linearer Antrieb für ein Förderband, 20 2019 104 718.6
  • Brune, A.; Brune, K.; Ponick, B. ; Selke, C. ; Steinbrink, J. ; Weber, J.-N. (2018): Energieübertragungseinrichtung, Verfahren zum Herstellen einer Energieübertragungseinrichtung sowie elektrische MaschineDE102016008590A1
  • Friebe, J. (2018): Coil and Electrical or Electronic Device having such a Coil, WO2018228736A1
  • Friebe, J.; Müller, B.; Putz, M. (2018): Wechselrichter mit Netztrennstelle und Isolationswiderstandsmessung sowie Verfahren zur Messung eines Isolationswiderstandes, EP3394948
  • Breuninger J.; Ebrahimi A.; Hochberg C.; Lefint J.; Riehs Ch.; Rogge T. (2017): Vorrichtung zur Bewegungsunterstützung eines menschlichen SchultergelenkesWO002017093298A1
  • Feisel, M.; Friebe, J.; Rigbers, K. (2017): Shuntstrommessung für Multistringgeräte und InterleavingwandlerDE102012100477C5
  • Friebe, J.; Lahnor, P.; Prior, O. (2017): Potentialverschiebende Halbbrücke, Polwender und blindleistungsfähiger Wechselrichter sowie PolwendeverfahrenDE102015113071A1
  • Friebe, J.; Lahnor, P.; Prior, O. (2017): Polwender und blindleistungsfähiger Wechselrichter sowie PolwendeverfahrenWO002017025490A1
  • Friebe, J.; Mallwitz, R.; Zacharias, P. (2017): Wechselrichter in Brückenschaltung mit langsam und schnell getakteten SchalternEP000002136465B1
  • Friebe, J.; Mueller, B.; Putz, M. (2017): Wechselrichter mit Netztrennstelle und Isolationswiderstandsmessung sowie Verfahren zur Messung eines IsolationswiderstandesDE102015122636B4
  • Friebe, J.; Prior, O.; Wappler, T. (2017): Wechselrichter und Steuerverfahren für einen WechselrichterDE102017106224A1
  • Mertens, A. (2017): Verfahren zum Betrieb eines modularen Multilevel-Stromrichters, modularer Multilevel-Stromrichter sowie ComputerprogrammDE102015116271A1
  • Brune, K.; Possen, M.; Brune, A.; Steinbrink, J.; Weber, J.-N.; Selke, C.; Ponick, B. (2016): EnergieübertragungseinrichtungDE102015007586A1
  • Denkana, B.; Ponick, B. (2016): Arbeitsspindel und Verfahren zum Betreiben einer ArbeitsspindelDE102006042539C5
  • Bieniek, S.; Friebe, J. (2015): Sicherheitseinrichtung für eine Photovoltaikanlage und Verfahren zum Betreiben einer Sicherheitseinrichtung für eine PhotovoltaikanlageDE102011053524B4
  • Friebe, J.; Leifert, T. (2015): Photovoltaische Anlagenkomponente und Verfahren zur Veränderung eines Betriebszustandes derselbenDE102013107606A1
  • Friebe, J.; Leifert, T.; Müller, B. (2015): Bidirektionaler Wandler mit Vorzugsrichtung und blindleistungsfähige Wechselrichter mit diesem WandlerDE102014113306A1
  • Friebe, J.; Leifert, T.; Oldenkamp, H. (2015): Wechselrichter sowie Verfahren zum Betrieb eines WechselrichtersDE102014101571B4
  • Brune, A. ; Gröninger, M. ; Horch, F. ; Juris, P. ; Kock, A. ; Pleteit, H.; Ponick, B. ; Schmidt, D. ; Wöstmann, F.-J. (2014): Spule und Verfahren zur Herstellung einer SpuleDE102013204047A1
  • Friebe, J. (2014): Verfahren und Vorrichtung zur Überwachung und Strommessung an einer magnetisch vorgespannten DrosselDE102013104402A1
  • Friebe, J.; Lederer, S.; Rigbers, K. (2014): Gleichspannungswandler und Verfahren zum Betreiben eines Gleichspannungswandlers und Wechselrichter mit einem WO002014019946A2
  • Friebe, J.; Leifert, T. (2014): Wechselrichter, insbesondere für PhotovoltaikanlagenDE202014100379U1
  • Friebe, J.; Prior, O. (2014): Verfahren zum Betreiben eines blindleistungsfähigen Wechselrichters mit Polwender und blindleistungsfähiger Wechselrichter mit PolwenderDE102014102000B3
  • Friebe, J.; Rigbers, K.; Viotto, M.; Zacharias, P. (2014): Drossel mit dynamischer VormagnetisierungDE102011000980B4
  • Friebe, J.; Söderberg, T. (2014): Elektronische BaugruppeDE102012106615A1
  • Blanz, J.; Friebe, J.; Stevens, S.; Wachenfeld, V. (2013): Bereitstellung von Regelleistung mit einer PhotovoltaikanlageDE102011054971A1
  • Busse, C,; Daur, P.-C.; Mertens, A.; Werner, T. (2013): Verfahren und Vorrichtung zur Bestimmung einer Sperrschichttemperatur eines HalbleiterbauelementsDE102012006009A1
  • Friebe, J.; Müller, B. (2013): Brückenschaltungsanordnung und Betriebsverfahren für einen Spannungswandler und SpannungswandlerDE102011051482A1
  • Friebe, J.; Nöding, C.; Rigbers, K.; Sahan, B.; Scarpa, V.; Vasconcelos Araújo, S.; Zacharias, P. (2013): WechselrichterschaltungDE102012107122A1
  • Hopf, M.; Friebe, J. (2013): Schutzeinrichtung für eine Photovoltaikanlage, Photovoltaikmodul mit einer solchen Schutzeinrichtung sowie Betriebsverfahren für eine solche SchutzeinrichtungDE102011000737B4
  • Friebe, J. (2012): Leistungszirkulation in InterleavingwandlernDE102012100494A1
  • Friebe, J.; Rigbers, K. (2012): Leistungselektronische WandlerstufePatentschrift: DE102010060687A1
  • Friebe, J; Prior, O.; Zacharias, P. (2012): Vormagnetisierte AC-Drossel mit PolwenderDE102011001147A1
  • Froböse, T. ; Jastrzembski, J.-P. ; Overmeyer, L.; Ponick, B. (2012): Antrieb eines Förderers durch einen LinearmotorDE102011016039A1
  • Mertens, A.; Ponick, B.; Tegeler, S.; Wiedmann, K. (2012): Biegeaktor und Endoskop mit einem BiegeaktorDE102010012417B4
  • Ponick, B.; Rauch, H.; Utecht, M. (2012): Großer Synchronmotor mit veränderbarer DrehzahlDE000019731313B4
  • Baruschka, L.; Mertens, A. (2011): Transformatorloser DirektumrichterDE102010013862A1
  • Froböse, T.; Jastrzembski, J.-P.; Overmeyer, L.; Ponick, B. (2011): Antrieb eines Förderers durch einen LinearmotorDE 1020 110 16 039 A1
  • Ponick, B. (2011): Elektrische Maschine und Verfahren zur Herstellung einer elektrischen MaschineDE102009038761A1
  • Friebe, J.; Prior, O. (2010): Elektrische Schaltung mit selbstleitendem Halbleiterschalter EP000002202884B1
  • Friebe, J.; Prior, O. (2010): Wandler mit mindestens einem selbtsleitenden SchalterWO002010034785A1
  • Blumenstein, F.; Friebe, J.; Gerlach, A.-K.; Scheuermann, J.; Zacharias, P.; Zinn, M. (2009): WechselrichterDE102007038960A1
  • Mertens, A.; Neeser, G. (2009): Verfahren zum Erkennen eines Störfalles "Rotating Stall" bei einem umrichtergespeisten VerdichterDE102007035712B4
  • Kern, U.; Pöhler, S.; Seinsch, H.O. (2008): Verfahren zur Wiederzuschaltung eines Drehstrommotors und elektrische Schaltung zur Durchführung des VerfahrensDE102007011510A1
  • Kuhn, H. ; Mertens, A.; Rüger, N. (2008): Mehrstufiger Spannungsumrichter und Verfahren zu Ansteuerung hierzuDE102007014597A1
  • Mertens, A.; Neeser, G. (2008): Ausgangsfilter für einen gepulsten StromrichterDE102005019215B4
  • Klug, R.-D.; Mertens, A. (2007): Hybrides FilterDE102006009046A1
  • Kahlen, K.; Mertens, A; Schierling, H. (2006): AntriebssystemDE102005004141A1
  • Mertens, A; Neeser, G. (2006): Verfahren zum Betrieb eines stromrichtergespeisten VerdichtersDE102004060206B3
  • Lange, J. ; Möhle, A. ; Ponick, B. ; Vogel, R. (2004): Elektrische Maschine bzw. SchiffsantriebssystemDE000010304276A1
  • Hofmann H.; Kutzner R.; Steinbrink J. (2001): Method for Limiting an Electric Current Passing through an Electrical Component and Limiting DeviceR102001074905A
  • Hofmann H.; Kutzner R.; Steinbrink J. (2000): Verfahren zur Begrenzung eines elektrischen Stroms durch ein elektrisches Bauteil und BegrenzungsvorrichtungWO002000013304A1
  • Ponick, B. ; Rauch, H. ; Utecht, M. (2000): Zweipolige elektrische Synchronmaschine mit liegendem Rotor und Verfahren zur Einstellung der Amplituden von Resonanzschwingungen doppelter Drehfrequenz an einer solchen SynchronmaschineDE000019832708C2
  • Steinbrink J. (2000): Leiteranordnung mit einer Mehrzahl von elektrischen Leitern zur Stromzuführung und zur Stromabführung zu einer WicklungsanordnungWO002000033442A1
  • Eckardt D.; Mertens A. (1998): Integrierender Analog-Digital-UmsetzerEP000000675604B1
  • Bakran, M.-M.; Marquardt, R.; Mertens, A. (1997): Digitales DatenübertragungssystemDE000019548099A1
  • Bruckmann M.; Mertebs A. (1997): Verlustarmer Leistungs-WechselrichterDE000019536470A1
  • Seinsch, H.O. (1990): Elektrische MeßeinrichtungDE000003600814C2
  • Seinsch, H.O. (1986): Gleichstrom-durchflossene Ringwicklung für einen AsynchrongeneratorDE000003316833C2
  • Seinsch, H.O. (1982): Verfahren zur meßtechnischen Erfassung und Überwachung von elektrischen Läuferunsymmetrien in Induktionsmaschinen mit KäfigläufernDE000002921724C2
  • Seinsch, H.O. (1977): Schallschutzhaube fuer elektrische Maschinen Mit OberflaechenkuehlungDE000002000236B2
  • Huhn J.; Juergen D.; Seinsch H.O. (1970): Einrichtung zur Geraeuschminderung roehrengekuehlter elektrischer MaschinenDE000001638183A

Sonstige Publikationen

  • Heide, D.; Bagaber, B.; Mertens, A.; Ponick, B. (2023): Abschlussbericht SkyPower100 - Pilotanlage zur Energieerzeugung aus Höhenwind, TIB
  • Denkena, B.; Teige, C.; Königsberg, J.; Ponick, B. (2021): Hybride Spindel: Prozessabhängige Einstellung der Spindeldynamik zur Produktivitätssteigerung in der spanenden Bearbeitung, AiF / FGW, https://www.fgw.de/wp-content/uploads/IGF_19590N_HSP_Internetveroeffentlichung_Hybride_Spindel.pdf
  • Heide, D. (2021): Electrical Machine Design for an All-Automatic Ground Generator Airborne Wind Energy System, WESC 2021 (Wind Energy Science Conference), 25.–28. Mai 2021, Hannover
  • Fauth, L.; Schefer, H.; Kopp, T.; Mallwitz, R.; Friebe, J.; Kurrat, M. (2020): Power Supply Systems for All Electric Aircraft, Deutscher Luft- und Raumfahrtkongress 2020 (virtuell), 01.-03.09.2020
  • Knebusch, B. (2020): Elektrische Lagerbelastung - Lagerströme durch Betrieb am Frequenzumrichter, BENNING Fachtagung, 12.03.2020, Bocholt
  • Narjes, G.; Müller, J.K.; Kalla, M.; Mertens, A.; Ponick, B. (2020): Optimization of Integrated Compressor Drives for Electrically Powered High-Lift Systems, Buchtitel: Fundamentals of High Lift for Future Civil Aircraft (Springer-Verlag), Contributions to the Final Symposium of the Collaborative Research Center 880, 17.-18.12.2019, Braunschweig
  • Friebe, J. (2019): Freiheitsgrade und Forschungsaspekte in der Elektrifizierung von Flugzeugen, EFZN-Forschungstag, 19.02.2019, Braunschweig
  • Friebe, J.; Fauth, L.; Knebusch, B. (2019): Spannungsbelastung magnetischer Bauelemente durch WBG-Leistungshalbleiter, ZVEI Jahrestagung 2019 der Fachverbände Transformatoren & Stromversorgungen sowie Electrical Winding & Insulation Systems, 26.03.-27.03.2019, Nürnberg-Boxdorf
  • Friebe, J.; Mertens, A. (2019): Power Electronics in Decentralized Systems and Microgrids, Segundo seminaro - Sistemas Energeticos de Pequena Escala, Universidad de Chile, Santiago, Chile, 13.12.2019
  • Rüberg, S.; Sewdien, V.; Rueda Torres, J. L.; Rakhshani, E.; Wang, D.; Tuinema, B.; Farrokhseresht, N.; Gusain, D.; Perilla, A.; Mola Jimenez, J. ; Longas Viejo, C.; Breithaupt, T.; Goudarzi, F.; Meyer, R.; Stallmann, F.; Herrmann, M.; Hofmann, L.; Mertens, A.; Hennig, T.; Val Escudero, M.; Kilter, J.; Prevost, T.; Denis, G. (2019): "Demonstration of Mitigation Measures and Clarification of Unclear Grid Code Requirements, Projekt: Massive Integration of Power Electronic Devices "
  • Bartschat, A.; Broer, C.; Coronado, D.; Fischer, K.; Kucka, J.; Mertens, A.; Meyer, R.; Moriße, M.; Pelka, K.; Tegtmeier, B.; Weber, S.; Wenske, J. (2018): Zuverlässige Leistungselektronik für Windenergieanlagen, Projektbericht, 144 Seiten, ISBN: 978-3-8396-1326-9 (2018)
  • Friebe, J.; Führer, O. (2017): Optimierte Aufbau- und Verbindungstechnik für Photovoltaik-Wechselrichter – TeilvorhabenHochfrequenz-Kompaktwechselrichter für vollautomatisierte Fertigungsprozesse, Niestetal, Germany, Mai 2017
  • Friebe, J.; Lahnor, P. (2017): AC-Solarmodule - ganz einfachS Print Prior Art Journal 2017 #17, Pages: 255-261, August 2017
  • Merkert, A.; Müller, J.; Mertens. A. (2017): Design eines SiC-Wechselrichters mit DC-DC-Wandler für Hybridfahrzeuge. E-MOTIVE Expertenforum Hannover 2017
  • Mertens. A.; Ponick, B. (2017): Elektroantriebe für Fahrzeuge - Aktuelle Forschung und Trends. E-MOTIVE Expertenforum Hannover 2017
  • Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger Verkehrsflugzeuge, E-MOTIVE Expertenforum Hannover, 2017
  • Steinbrink, J. (2017): Ausnutzungssteigerung von PMSM durch Nutzung von orientierungsprofilierten Magneten25. Kleinmaschinenkolloquium, 16.-17.03.2017, Ilmenau
  • Steinbrink, J.; Weickhmann, J. M. (2017): Optimisation of Magnets for Motor Design Using Field ShapingUK Magnetics Society, 4.-5. 10. 2017, Hanau
  • Breithaupt, T.; Herwig, D.; Hofmann, L.; Mertens, A.; Meyer, R.; Farrokhseresht, N.; Sewdien, V.; Tuinema, B.; Wang, D.; Rueda Torres, J.; Rüberg, S. (2016): Report on Systemic Issues Projekt: Massive Integration of Power Electronic Devices
  • Friebe, J.; Rigbers, K. (2016): GaN-Transistoren – Potentiale und Anforderungen am Beispiel von PV-WechselrichternETG-Workshop Schaltungstechnik für GaN-Bauelemente in der Leistungselektronik, Nürnberg, Germany, 07.03.2016
  • Ebrahimi, A. (2014): Antriebstechnik in der Medizin- und RehabilitationstechnikIn: Verl, Alexander (Hrsg.) u.a.; Stuttgarter Produktionsakademie: Antriebstechnik in der Medizin- und Rehabilitationstechnik: Seminar, 2014
  • Friebe, J. (2014): Stand der Technik und Trends bei Leistungselektronik für PV-WechselrichterVortrag im Rahmen der Vortragsreihe der SRT-Freunde Darmstadt, Germany, 24.10.2014
  • Janssen, G., Gehrking, R.,Edler, J., Ponick, B.,Stölting, H.D. (2011): Electromagnetic Design of Microactuators, Design and Manufacturing of Active MicrosystemsSpringer Verlag Heidelberg Dordrecht London New York, ISBN978-3-642-12902-5, Part 1, 11-28
  • Janssen, G., Ponick, B. (2011): Kleine Motoren, große Möglichkeiten, Nano- und QuantenengineeringUnimagazin 01/02, H12467,Zeitschrift der Leibniz Universität Hannover, S.32-34
  • R. Helmer; K. Reichert (2008): Dimensionierung von PM-Maschinen, Allgemeines und mit FEMAG
  • Harms, H.-F., Schoon, J., Janssen, G. (2006): Störspannungen an Betriebsempfangsantennenanlagen – Suche nach einer StörquelleInternationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 7.-9. März 2006 in Düsseldorf, VDE Verlag GmbH, Berlin Offenbach, S.735-742
  • Janssen, G. (2006): Mikroaktoren in großer VielfaltJahresbericht, Institut für Antriebssysteme und Leistungselektronik, Hannover, S.10-11
  • Steinbrink, J. (2006): Kraftwirlungen in permanentmagneterregten Maschinen