Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1993 1992 1991 alle Jahre

Aufsätze in einem Tagungsband

 (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine Model, The Science of Making Torque from Wind (TORQUE 2016) München, 5.-7. October 2016

Dörbaum, M.; England, M.; Ponick, B. (2016): Analysis of Eddy Currents Influencing an Electromagnetic Tilting Actuator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Dörbaum, M.; Winkel, T.; Tappe, S.; Kotlarski, T.; Ortmaier; T. Ponick, B.  (2016): Torque Measurements on an Electromagnetic Tilting Actuator, actuator 2016, Bremen, Germany, 13.-15. June 2016

Dück, P., Ponick, B. (2016): A Novel Iron-Loss-Model for Permanent Magnet Synchronous Machines in Traction Applications., 4th International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road Vehicles & International Transportation Conference (ESARS ITEC), Toulouse, Frankreich

Dück, P.; Lesniewski, P.; Ponick, B.  (2016): Design and Analysis of Axial-Flux Permanent Magnet Synchronous Machines as Traction Drives for Electric Vehicles, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 376-381

Haschen, E. (2016): Verbesserte Vorausberechnung des Polstreuleitwerts von Schenkelpol-Synchronmaschinen , Symposium Elektromagnetismus, Technische Akademie Esslingen (TAE), Künzelsau, Germany

Heseding, J.; Mueller-Deile, F.; Mertens, A. (2016): Estimation of losses in permanent magnet synchronous machines caused by inverter voltage harmonics in driving cycle operation, 18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe

John, M.; Mertens, A.; Baruschka, L.; Alvarez, R.; Pieschel, M. (2016): Design and Evaluation of a Test Rig for Full-Size Grid Frequency Stabilizer Modules with Ultracapacitors, 18th European Conference on Power Electronics and Applications (EPE), Karlsruhe, Germany, 5-9 September 2016

Karwatzki, D.; Baruschka, L.; Dokus, M.; Kucka, J.; Mertens, A.  (2016): Branch Energy Balancing with a Generalised Control Concept for Modular Multilevel Topologies – Using the Example of the Modular Multilevel Converter, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5-9 September 2016

Karwatzki, D.; Mertens, A. (2016): Control Approach for a Class of Modular Multilevel Converter Topologies, IEEE Energy Conversion Congress & Exposition (ECCE 2016), Milwaukee, USA

Kauth, F.; Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Seume, J. R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation 2016, Brüssel, Belgien, 11.-13. Oktober 2016

Koupeny, J.; Lücke, S.; Mertens, A. (2016): Extended Observer-Based Simultaneous Online Parameter Estimation of Inverter-Fed Squirrel-Cage Induction Machines Considering the Influence of Current and Speed Measurement Errors, 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): Advanced Condition Monitoring System Based on On-Line Semiconductor Loss Measurements, IEEE Energy Conversion Congress and Exposition (ECCE 2016), Milwaukee, WI, USA, 18.-22. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): On-Line Semiconductor Switching Loss Measurement System for an Advanced Condition Monitoring Concept, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krupp, H.; Mertens, A.  (2016): DC Link RMS Current Estimation in Systems with Several Converters Connected to a Shared DC Link with Distributed Capacitors, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krupp, H.; Mertens, A. (2016): Semi-Analytical Loss Model for Rotary Transformers; European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

Kucka, J.; Karwatzki, D.; Mertens, A. (2016): AC/AC Modular Multilevel Converters in Wind Energy Applications: Design Considerations, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Kucka, J.; Mertens, A.  (2016): Control for Quasi Two-Level PWM Operation of Modular Multilevel Converter, IEEE International Symposium on Industrial Electronics (ISIE), Santa Clara, USA

Lammers, S.; Adam, G.; Schmid, H. J.; Mrozek, R.; Oberacker, R.; Hoffmann, M. J.; Quattrone, F.; Ponick, B. (2016): Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine, 6th International Electric Drives Production Conference (EDPC), Nuremberg, 2016

Lücke, S.; Koupeny, J.; Mertens, A.  (2016): Induction Machine Speed Tracking Based on Rotor Slot Harmonics Using a Modified PLL Approach , 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Mertens, A.; Steinbrink, J. (2016): Generator-Umrichter-Prüfstand zur Untersuchung elektrischer Energiewandler in Antriebssträngen, ETG Mitgliederinformationen 2/2016, pp. 4-5

Misir, O.; Görsdorf, J.; Ponick, B. (2016): Determination of the Inductances of a Salient Pole Synchronous Machine Based on the Voltage Equation of a Single Damper Loop, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 470-475

Misir, O.; Potoniec, A.; Ponick, B.  (2016): Calculation of the Damper Winding Inductances of a Synchronous Machine, The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), Glasgow, Scotland

Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R., Ponick, B. (2016): Calculation Method of Three-Phase Induction Machines equipped with Combined Star-Delta Windings, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, pp. 168-174

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Dependency of the Lifetime Estimation of Power Modules in Fully Rated Wind Turbine Converters on the Modelling Depth of the Overall System, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor Frequencies, TORQUE 2016, München, Germany, 5.-7. Oktober 2016

Movagharnejad, H.; Mertens, A. (2016): Design Optimization of Various Contactless Power Transformer Topologies for Wireless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September

Müller-Deile, F.; Heseding, H.; Ponick, B.; Mertens, A. (2016): Bezahlbare elektrische Reichweite durch Modularität,Deutsches Ingenieurblatt 5-2016, pp. 54-60

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles & International Transportation Electrification Conference, Toulouse, Frankreich, 02.-04. November 2016

Oelkers, F., Weber, B., Mertens, A.  (2016): Oversampling Based Approach for Open Circuit Fault Detection in PMSM Drive Systems, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Quattrone, F.; Ponick, B. (2016): Evaluation of a Permanent Magnet Synchronous Machine with a Rotor Coil for Improved Self-Sensing Performance at Low Speed, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, 2016

Tappe, S.; Dörbaum, M.; Kotlarski, T.; Ponick, B.; Ortmaier, T. (2016): Kinematics and Dynamics Identification of a Hyper-Redundant, Electromagnetically Actuated Manipulator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Ullrich, B.; Mertens, A. (2016): Temperature estimation for wire bondings in power semiconductor devices, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

von Hofen, M.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2016): Hybrid offshore HVDC converter with diode rectifier and Modular Multilevel Converter, 2016 IEEE 7th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Vancouver, BC, 2016, pp. 1-7.

Zulk, S.; Köneke, T.; Mertens, A. (2016): Analytical Modeling of Plate Fin Heat Sinks for Natural Convection Cooling in Power Electronics, IEEE 13th Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, 17-.-20. Oktober 2016

Aufsätze in Fachzeitschriften

Krone, T.; Xu, C.; Mertens, A. (2016): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Transactions on Industry Applications, DOI: 10.1109/TIA.2016.2618785

Mertens, A.; Kucka, J. (2016): Quasi Two-Level PWM Operation of an MMC Phase Leg With Reduced Module Capacitance, Power Electronics, IEEE Transactions on , vol.21, no.10, pp.6765-6769

Misir, O.; Ponick, B. (2016): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering – Archiv für Elektrotechnik, Volume 98, Issue 4

Misir, O.; Dobbert, F.; Ponick, B. (2016): Analytical Method for the Air Gap Permeance Calculation of Salient Pole Synchronous Machines, e & i Elektrotechnik und Informationstechnik, Volume 133, Issue 2, pp. 103-111

Misir, O.; Raziee, S. M.; Ponick, B.  (2016): Determination of the Inductances of Salient Pole Synchronous Machines Based on the Voltage Equation of a Single Coil in the Stator Winding, IEEE Transactions on Industry Applications, Volume 52, No. 5, pp. 3792-3804

Quattrone, F.; Ponick, B. (2016): Maschinendesign für geberlos geregelte PMSM, e & i Elektrotechnik und Informationstechnik

Buchbeiträge

Junginger, C. (2016): Untersuchung der Stromverdrängung im Ständer hoch ausgenutzter Elektrischer Maschinen, Dissertation, Springer Verlag, AutoUni-Schriftenreihe, ISBN 978-3-658-17006-6

Tegeler, S. (2016): Erweiterung von analytischen Verfahren zur Berechnung von Ummagnetisierungsverlusten in Drehfeldmaschinen, Dissertation