Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1993 1992 1991 alle Jahre

Aufsätze in einem Tagungsband

Dietz, R., Mertens, A.  (2015): Extended Power Control for Distributed Generation Units, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-9

Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T. ; Mertens, A.; Ponick, B.  (2015): Simulation and Measurement on a Novel Electromagnetic Tilting Actuator, VDI Mechatroniktagung 2015, Dortmund, Germany, 12.-13. März 2015

Dörbaum, M.; Weber, S.; Strempel, J.; Winkel, T.; Mertens, A.; Ponick, B. (2015): Comparison of two alternative power supply strategies for an electromagnetic tilting actuator, Innovative Small Drives and Micro-Motor Systems (IKMT), 10. ETG/GMM-Fachtagung, Koeln, Germany, 14.-15. September 2015, pp. 71-76

Dück, P.; Jürgens, J.; Ponick, B.  (2015): Calculation of Synchronous Reluctance Machines Used as Traction Drives, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-5

Guseva, A.; Hoffmann, M.; Unger, A.; Zulk, S.; Amien, M.; Sarradj, E.; Kupnik, M. (2015): Ultrasonic Transducer Characterization in Air Based on an Indirect Acoustic Radiation Pressure Measurement, IEEE International Ultrasonic Symposium (IUS), Taipei, Taiwan, 21.-24. Oktober 2015, pp. 1-4

Jürgens, J.; Winter, O.; Fricassè, A.; Ponick, B.  (2015): Influences of Iron Loss Coefficients Estimation on the Prediction of Iron Losses for Variable Speed Motors, IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Jürgens, J; Ponick, B.  (2015): Eignung von synchronen Reluktanzmaschinen und permanenterregten Synchronmaschinen ohne Seltenerdmagnete als Fahrzeugantriebe, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015

Kaczorowski, D.; Michalak, B.; Mertens, A.  (2015): A Novel Thermal Management Algorithm for Improved Lifetime and Overload Capabilities of Traction Converters, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Karwatzki, D.; Baruschka, L.; Kucka, J.; Mertens, A. (2015): Current Control and Branch Energy Balancing of the Modular Multilevel Converter, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 6360-6367

Karwatzki, D.; Baruschka, L.; Mertens, A.  (2015): Survey on the Hexverter topology — A modular multilevel AC/AC converter, 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp.1075-1082

Koupeny, J.; Lücke, S.; Mertens, A.  (2015): Observer-Based Online Parameter Estimation of Squirrel-Cage Induction Machines Based on the Gradient Descent Method, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Koupeny, J.; Siebrecht, M.; Lücke, S.; Mertens, A.  (2015): Observer-Based Online Parameter Estimation of Doubly Fed Induction Generators Based on the Gradient Descent Method, International ETG Congress 2015 - die Energiewende, Bonn, Germany, 17.-18. November 2015

Krone, T.; Xu, C.; Mertens, A. (2015): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 2715-2722

Krupp, H., Mertens, A. (2015): Rotary Transformer Design for Brushless Electrically Excited Synchronous Machines, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Kucka, J.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Improved Modular Multilevel Converter Topology with Magnetically Coupled Branch Inductors, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 3593-3600

Kucka, J.; Karwatzki, D.; Mertens, A. (2015): Optimised Operating Range of Modular Multilevel Converters for AC/AC Conversion with Failed Modules, European Conference on Power Electronics and Applications (EPE’2015 ECCE-Europe), Geneva, Switzerland

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Salient-Pole Synchronous Machine without Damper Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 10th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Guarda, Portugal, pp. 117-123

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Synchronous Machine with Unsymmetrical Stator Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 18th International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, pp. 306-311

Oelkers, F.; Krone, T.; Rosen, A.; Mertens, A.  (2015): Implementation and Test of a Fault-Tolerant Wheel Hub Drive System for an Electric Vehicle, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Oelkers, F.; Rosen, A.; Mertens, A. (2015): Model-based Approach for Sensor Fault-tolerant Drive Systems, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Quattrone, F.; Ponick, B.  (2015): Active Differential Inductance Control of Permanent Magnet, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-7

Quattrone, Francesco; Ponick, Bernd; Fricke, Torben (2015): Influence of punch edges on the self-sensing capabilities of permanent magnet synchronous machines with different rotor topologies, Electric Drives Production Conference (EDPC), Nuremberg, Germany, 15.-16. September 2015, pp.1-4

Rosen, A,; Groninger, M.; Mertens, A.  (2015): Modeling and optimized control of fault-tolerant H-bridge fed multiphase drives, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-6

Stübig, C.; Seibel, A.; Schleicher, K.; Haberjan, L.; Kloepzig, M.; Ponick, B. (2015): Electromagnetic Design of a 10 MW Permanent Magnet Synchronous Generator for Wind Turbine Application, IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Tappe, S.; Dörbaum, M.; Mertens, A.; Ponick, B.; Kotlarski, J.; Ortmaier, T. (2015): The Kinematic Synthesis of a Spatial, Hyper-Redundant System based on Binary Electromagnetic Actuators, 6th International Conference on Automation, Robotics and Applications (ICARA 2015), Queenstown, New Zealand,17.-19. Februar 2015, pp. 211-216

Weber, B.; Wiedmann, K.; Mertens, A.  (2015): Increased Signal-to-noise Ratio of sensorless control using current oversampling, 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp. 1129-1134

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Dynamic Behavior of the Doublegenerator System for Hydraulic Power Plants, Power Electronics for Distributed Generation Systems (PEDG), 2015 IEEE 6th International Symposium on, Aachen, Germany, 22.-25. Juni 2015, pp. 1-7

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Modeling of a Novel Speed Variable Generator System for Hydroelectric Power Plants, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe), Nürnberg, Germany, pp. 1-10

Zulk, S.; Mertens, A.  (2015): Characterization of Dead Time Effects for Common-Mode-Reducing Modulation Methods, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Aufsätze in Fachzeitschriften

Misir, O.; Dobbert, F.; Ponick, B. (2015): Analytisch-numerische Berechnung des magnetischen Luftspaltleitwerts für den Läufer einer Schenkelpolsynchronmaschine, e & i Elektrotechnik und Informationstechnik, Volume 132, Issue 1, pp. 33-38

Mustafa, R.; Küçükay, F.; Boseniuk, F.; Ponick, B.; Tang, T.; Köhler, J.; Ullrich, B.; Mertens, A.  (2015): Innovative Electric Vehicle Modelling for Energy Management Applications, International Journal of Vehicle Design, vol. 68, no. 4, pp. 265-284

S.H. Teichel, M. Dörbaum, O. Misir, A. Merkert, A. Mertens, J.R. Seume, B. Ponick (2015): Design considerations for the components of electrically powered active high-lift systems in civil aircraft, CEAS Aeronautical Journal, Volume 6, Number 1, pp. 49-67

Buchbeiträge

Braunisch, D.  (2015): Kombinierte analytisch-numerische Berechnung der Magnetgeräusche elektrischer Maschinen, Dissertation, TIB Hannover, Univ., Diss., Online-Ress. 2015, http://edok01.tib.uni-hannover.de/edoks/e01dh15/842127003.pdf

Garbe, E.  (2015): Beeinflussung des Geräuschs von Induktionsmaschinen durch innovative Ständer- und Läufergeometrien, Dissertation, TIB Hannover, Univ., Diss., Online-Ress. 2015, http://edok01.tib.uni-hannover.de/edoks/e01dh15/831947675.pdf