Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1993 1992 1991 alle Jahre

Aufsätze in einem Tagungsband

C. Sommer, A. Merkert, A. Mertens (2014): A New Control Method for Minimizing the DC-Link Capacitor Current of HEV Inverter Systems, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp.1188-1193

D. Karwatzki, L. Baruschka, J. Kucka, M. von Hofen, A. Mertens (2014): Improved Hexverter Topology with Magnetically Coupled Branch Inductors, EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Optimised Operation Mode for the Hexverter Topology Based on Adjacent Compensating Power, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5399-5406

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Branch Energy Control for the Modular Multilevel Converter Hexverter, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp.1613-1622

D. Karwatzki, M. von Hofen, L. Baruschka, A. Mertens (2014): Operation of Modular Multilevel Matrix Converters with Failed Branches, 40th Annual Conference of IEEE Industrial Electronics Society (IECON 2014), Dallas, TX, USA, pp. 1650-1656

Emmrich, K.  (2014): Energieeffizienz - im System ggf. ganz anders, als es die Komponente verspricht, 13. Technischer Tag der VEM-Gruppe, Wernigerode, Germany, 30. September 2014

F. Boseniuk and B. Ponick (2014): Parameterization of transient thermal models for permanent magnet synchronous machines exclusively based on measurements, Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on. IEEE, pp. 295-301

F. Fuchs and A. Mertens (2014): Prediction and Avoidance of Grid-Connected Converter's Instability caused by Wind Park Typical, Load-Varying Grid Resonance, Energy Conversion Congress and Exposition (ECCE), IEEE 14-18 Sept., Pittsburgh, PA, USA, pp. 2633-2640

F. Fuchs, R. Dietz, S. Garske, T. Breithaupt, A. Mertens, L. Hofmann (2014): Challenges of grid integration of distributed generation in the interdisciplinary research project Smart Nord, IEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), pp. 1-7

Groninger, M.; Horch, F.; Kock, A,; Jakob, M.; Ponick, B (2014): Cast Coils for Electrical Machines and their Application in Automotive and Industrial Drive Systems, 4th International Electric Drives Production Conference (EDPC 2014), Nürnberg, Germany, 30. September - 1. October, pp. 1-7

J. Jürgens, A. Brune, B. Ponick (2014): Electromagnetic design and analysis of a salient-pole synchronous machine with tooth-coil windings for use as a wheel hub motor in an electric vehicle, XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 744-750

John, M.; Mendoza-Araya, P.A.; Venkataramanan, G. (2014): Small signal impedance measurement in droop controlled AC microgrids, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 702-709

K. Emmrich, A. Brune, B. Ponick  (2014): Evaluation of an analytical, efficiency-optimized torque-speed characteristic of induction machines coupled with a thermal-electromagnetic energy consumption calculation, XXIth International Conference on Electrical Machines (ICEM), Berlin, pp. 762-767

Kock, A.; Gröninger, M.; Mertens, A. (2014): Modeling and Optimized Control of Fault-tolerant Drive Topologies for Electric Vehicle Applications, XXIst International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 2372-2379

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2014): Universelles Werkzeug zur Steigerung der Energieeffizinz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik, SIMPEP-Kongress Koblenz, 17.-19. September 2014

Koupeny, J.; Mertens, A.  (2014): Offline and Online Parameter Estimation of Controlled Electric Drives, Symposium with the Institute of Thermomechanics of the Academy of Sciences, Prague, Czech Republic, Sept. 2014

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): A New Modular Multilevel AC/DC Converter Topology Applied to a Modular Multilevel DC/DC Converter, EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): Low-speed Drive Operation of the Modular Multilevel Converter Hexverter Down to Zero Frequency, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5407-5414

M. Wehner and B. Ponick (2014): Search coil systems for early fault detection in wind turbine generators, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Ischia, Italy, 18.-20. Juni 2014, pp. 273-278

Misir O.; Ponick B. (2014): Analysis of Three-Phase Induction Machines with Combined Star-Delta Windings, IEEE 23rd International Symposium on Industrial Electronics (ISIE), Istanbul, Turkey, 1.-4. Juni 2014, pp. 756-761

O. Korolova, P. Dück, A. Brune, J. Jürgens, B. Ponick (2014): Prediction of Efficiency-optimized Salient-pole Synchronous Machines’ Operating Range Using a Coupled Numerical-Analytical Method, XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 871-876

T. Krone, T. Koneke, A. Mertens (2014): System design for junction temperatures up to 200°C, 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), Lappeenranta, Finland, 26.-28. August 2014, pp. 2238-2245

Weber, S.; Merkert, A.; Mertens, A.  (2014): Gate driver for safe operation of depletion mode SiC JFETs, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 5716-5722

Aufsätze in Fachzeitschriften

A. Merkert, T. Krone, A. Mertens (2014): Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices, Power Electronics, IEEE Transactions on , vol.29, no.5, pp.2238,2245

Bostanci, E.; Neuschl, Z.; Plikat, R.; Ponick, B. (2014): No-Load Performance Analysis of Brushless DC Machines With Axially Displaceable Rotor, Industrial Electronics, IEEE Transactions on, vol. 61, Issue 4, pp. 1692-1699

Jürgens, J.; Brune, A.; Ponick, B.  (2014): Weg von teuren Permanentmagneten, Zeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (ZfAW), Heft 4/2014, pp. 49-55

M. Blank, M. Calabria, R. Dietz, F. Fuchs, T. Klingenberg, S. Lehnhoff, A. Mertens, W. Schumacher (2014): Agentenbasierte Vorhaltung und Erbringung von Primärregelleistung, Automatisierungstechnik 2014, vol. 62, no. 5, pp. 347-363

R. Meyer, A. Zlotnik, A. Mertens (2014): Fault Ride-Through Control of Medium-Voltage Converters With LCL Filter in Distributed Generation Systems, IEEE Transactions on Industry Applications, vol. 50, no. 5, 2014, pp. 3448-3456

Buchbeiträge

Bostanci, E.  (2014): Performance Analysis of Brushless DC Machines with Axially Displaceable Rotor, Dissertation, AutoUni-Schriftenreihe, Band 64, Logos Verlag Berlin GmbH

Jastrzembski, J.-P.  (2014): Synchrone Linear-Direktantriebe für Förderbänder, Dissertation, VDI-Fortschrittsbericht Nr. 412, Reihe 21, Elektrotechnik, VDI-Verlag

Robert Meyer (2014): Fault-Ride-Through-Regelung von Windenergieanlagen mit Vollumrichter und LCL-Netzfilter, Dissertation, Leibniz Universität Hannover, TIB Hannover, Univ., Diss., Online-Ress. 2014, http://edok01.tib.uni-hannover.de/edoks/e01dh14/812759397.pdf