Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Antriebssysteme und Leistungselektronik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1993 1992 1991 alle Jahre

Aufsätze in einem Tagungsband

A. Brune, P. Dück, A. Kock, M. Gröninger and B. Ponick (2012): Evaluation of an Efficiency-optimized Calculation of PM Synchronous Machines’ Operating Range Using Time-saving Numerical and Analytical Coupling, Vehicle Power and Propulsion Conference (VPPC), Seoul, Südkorea

Fuchs, F.; Mertens, A. (2012): Dynamic modeling of a 2 MW wind turbine for converter issues : part 1, Power Electronics and Motion Control (EPE PEMC 2011 ECCE Europe), Proceedings of the 2012-15th International Conference and Expositon on, Novi Sad, Serbia

Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick (2012): Design of an Integrated Electromagnetic Actuator for High Frequency Damping Forces, XXth International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Kriese, M.; Wittek, E.; Gattermann, S.; Tischmacher, H.; Poll, G.; Ponick, B. (2012): Influence of bearing currents on the bearing lifetime for converter driven machines, XXth International Conference on Electrical Machines (ICEM), pp. 1735-1739

Merkert, A.; Krone, T.; Mertens, A. (2012): Characterization and Scalable Modelling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices, IEEE Vehicle Power and Propulsion Conference (VPPC 2012), Seoul, Korea

Meyer, R.; Mertens, A. (2012): Design and Optimization of LCL Filters for Grid-Connected Converters, 15th International Power Electronics and Motion Control Conference (EPE-PEMC ECCE Europe), Novi Sad, Serbia

Meyer, R.; Mertens, A. (2012): Design of LCL Filters in Consideration of Parameter Variations for Grid-Connected Converters, IEEE Energy Conversion Congress & Exposition (ECCE), Raleigh, NC, USA

P. Juris, A. Brune and B. Ponick (2012): A Coupled Thermal-Electromagnetic Energy Consumption Calculation for an Electric Vehicle with Wheel Hub Drive Considering Different Driving Cycles, Vehicle Power and Propulsion Conference (VPPC)

Quattrone, F.; Lorenz, R.D (2012): Dynamic modeling of losses in electrical machines for active loss control, Energy Conversion Congress and Exposition (ECCE), pp.47-52

Sonnenschein, M.; Appelrath, H.-J.; Hofmann, L.; Kurrat, M.; Lehnhoff, S.; Mayer, C.; Mertens, A.; Uslar, M.; Nieße, A.; Tröschel, M. (2012): Dezentrale und selbstorganisierte Koordination in Smart Grids , VDE-Kongress 2012 Smart Grid Intelligente Energieversorgung der Zukunft

Stuebig, C.; Ponick, B. (2012): Practical Experiment for Students: Winding an Induction Machine, 20th International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines for the Entire Speed Range with Reduced Computational Effort based on a Novel MRAS Approach, Power Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on

Wiedmann, K; Mertens, A (2012): Novel MRAS Approach for Online Identification of Key Parameters for Self-Sensing Control of PM Synchronous Machines, 15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines Including Online System Identification Based on a Novel MRAS Approach, 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI

Wittek, E.; Kriese, M.; Tischmacher, H.; Gattermann, S.; Ponick, B.; Poll, G. (2012): Capacitance of bearings for electric motors at variable mechanical loads, XXth International Conference on Electrical Machines (ICEM), pp. 1602-1607

Aufsätze in Fachzeitschriften

A. Mertens, F. Fuchs, L. Baruschka (2012): Wandler im Meerespuls, Erneuerbare Energien, 07/2012

B. Denkena, W. Bickel, J. Emmrich, B. Ponick (2012): Entwurf eines innovativen Spindelmotors zur Erhöhung der Prozessstabilität von Frässpindeln, Zeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2012, Seite 518-521, Carl Hanser Verlag

Ganesan, V., Wiedmann, K., Janssen, G., Ponick, B., Mertens, A. (2012): Development of Drive Systems Based on Electromagnetic Microactuators, Industrial Electronics, IEEE Transactions on , vol.59, no.3, pp.1409-1417, March 2012

Stübig, C.; Ponick, B. (2012): Comparison of Calculation Methods for Hybrid Stepping Motors, Industry Applications, IEEE Transactions on , vol.48, no.6, pp.2182,2189

Buchbeiträge

Cornelia Stübig (2012): Effiziente Berechnungsverfahren für Hybridschrittmotoren, Dissertation, VDI-Fortschrittsbericht Nr. 400, Reihe 21, Elektrotechnik, VDI-Verlag

Rüger, N. (2012): Zur Anwendung eines bandseparierenden Modulationsverfahrens mit niedrigen Taktzahlen in der Leistungselektronik, Dissertation, VDI-Fortschrittsbericht Nr. 402, Reihe 21, Elektrotechnik, VDI-Verlag

Wiedmann, K. (2012): Positionsgeberloser Betrieb von permanentmagneterregten Synchronmaschinen, Dissertation