Logo Leibniz Universität Hannover
Logo: Institute for Drive Systems and Power Electronics/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institute for Drive Systems and Power Electronics/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
search
in all authortitledescription
category
year
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1993 1992 1991 all years

Conference Proceedings

John, M.; Mertens, A. (2017): Harmonic Domain Model of an Open-Loop Controlled PWM Converter, XIX International Symposium on Theoretical Electrical Engineering, Ilmenau, Germany, 16.-19.07.2017

John, M.; Mertens, A.; Popp, M.; Mathis, W. (2017): Model Order Reduction for a Full Scale Grid Converter for Grid Simulations, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Luecke, S.; Mertens, A.  (2017): Self-sensing control of induction machines using an additional short-circuited rotor coil, IEEE International Symposium on Sensorless Control for Electrical Drives (SLED), Catania, Italien, Sep.

Misir, O.; Brand, J.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part II: Analytical Steady-State Solution Method, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Misir, O.; Spyridonidis, I.; Bothmann, F.; Dreyer, M.; Ponick, B. (2017): Performance Analysis of Synchronous Machines after Disconnecting Stator Coils - Part I: Numerical Integration, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. (2017): Impact of Individual Pitch Control on Pitch Actuators in Megawatt Wind Turbines, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe),Warsaw, Poland, 11.-14.09.2017

Movagharnejad, H.; Mertens, A. (2017): Design Metrics of Compensation Methods for Contactless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe), Warsaw, Poland, 11.-14.09.2017

Müller, J.; Mertens, A. (2017): Power Electronics Design for a direct-driven Turbo Compressor Used as Advanced High-Lift System in Future Aircraft, IEEE Industrial Electronics Society IECON17, Peking, China, 29.10-01.11.2017

Popp, M.; Mathis, W.; John, M.; Korolova, O.; Mertens, A.; Ponick, B; (2017): A Modified CCM Approach for Simulating Hierarchical Interconnected Dynamical Systems, Proc. International Symposium on Circuits and Systems, ISCAS , Baltimore, US, pp. 1262–1265

Redlich, J.; Juergens, J.; Brune, K.; Ponick, B. (2017): Synchronous Machines with Very High Torque Density for Automotive Traction Applications, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017, Redlich, J.; Juergens, J.; Brune, K.; Ponick, B.

Urbanek, S.; Quattrone, F.; Ponick, B. (2017): Implementation and Validation of a New Analytic-Numeric Method for Dynamic Core Loss Calculation, IEEE International Electrical Machines and Drives Conference (IEMDC), Miami, 21.-24.05.2017

Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J. (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine Model, The Science of Making Torque from Wind (TORQUE 2016) München, 5.-7. October 2016

Dörbaum, M.; England, M.; Ponick, B. (2016): Analysis of Eddy Currents Influencing an Electromagnetic Tilting Actuator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Dörbaum, M.; Winkel, T.; Tappe, S.; Kotlarski, T.; Ortmaier; T. Ponick, B.  (2016): Torque Measurements on an Electromagnetic Tilting Actuator, actuator 2016, Bremen, Germany, 13.-15. June 2016

Dück, P., Ponick, B. (2016): A Novel Iron-Loss-Model for Permanent Magnet Synchronous Machines in Traction Applications., 4th International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road Vehicles & International Transportation Conference (ESARS ITEC), Toulouse, Frankreich

Dück, P.; Lesniewski, P.; Ponick, B.  (2016): Design and Analysis of Axial-Flux Permanent Magnet Synchronous Machines as Traction Drives for Electric Vehicles, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 376-381

Haschen, E. (2016): Verbesserte Vorausberechnung des Polstreuleitwerts von Schenkelpol-Synchronmaschinen , Symposium Elektromagnetismus, Technische Akademie Esslingen (TAE), Künzelsau, Germany

Heseding, J.; Mueller-Deile, F.; Mertens, A. (2016): Estimation of losses in permanent magnet synchronous machines caused by inverter voltage harmonics in driving cycle operation, 18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe

John, M.; Mertens, A.; Baruschka, L.; Alvarez, R.; Pieschel, M. (2016): Design and Evaluation of a Test Rig for Full-Size Grid Frequency Stabilizer Modules with Ultracapacitors, 18th European Conference on Power Electronics and Applications (EPE), Karlsruhe, Germany, 5-9 September 2016

Karwatzki, D.; Baruschka, L.; Dokus, M.; Kucka, J.; Mertens, A.  (2016): Branch Energy Balancing with a Generalised Control Concept for Modular Multilevel Topologies – Using the Example of the Modular Multilevel Converter, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5-9 September 2016

Karwatzki, D.; Mertens, A. (2016): Control Approach for a Class of Modular Multilevel Converter Topologies, IEEE Energy Conversion Congress & Exposition (ECCE 2016), Milwaukee, USA

Kauth, F.; Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Seume, J. R. (2016): Highly Integrated Electrically Driven Active High-Lift Compressor Systems for Future Civil Aircraft, Greener Aviation 2016, Brüssel, Belgien, 11.-13. Oktober 2016

Koupeny, J.; Lücke, S.; Mertens, A. (2016): Extended Observer-Based Simultaneous Online Parameter Estimation of Inverter-Fed Squirrel-Cage Induction Machines Considering the Influence of Current and Speed Measurement Errors, 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): Advanced Condition Monitoring System Based on On-Line Semiconductor Loss Measurements, IEEE Energy Conversion Congress and Exposition (ECCE 2016), Milwaukee, WI, USA, 18.-22. September 2016

Krone, T.; Dang Hung, L.; Jung, M.; Mertens, A. (2016): On-Line Semiconductor Switching Loss Measurement System for an Advanced Condition Monitoring Concept, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krupp, H.; Mertens, A.  (2016): DC Link RMS Current Estimation in Systems with Several Converters Connected to a Shared DC Link with Distributed Capacitors, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Krupp, H.; Mertens, A. (2016): Semi-Analytical Loss Model for Rotary Transformers; European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

Kucka, J.; Karwatzki, D.; Mertens, A. (2016): AC/AC Modular Multilevel Converters in Wind Energy Applications: Design Considerations, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Kucka, J.; Mertens, A.  (2016): Control for Quasi Two-Level PWM Operation of Modular Multilevel Converter, IEEE International Symposium on Industrial Electronics (ISIE), Santa Clara, USA

Lammers, S.; Adam, G.; Schmid, H. J.; Mrozek, R.; Oberacker, R.; Hoffmann, M. J.; Quattrone, F.; Ponick, B. (2016): Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine, 6th International Electric Drives Production Conference (EDPC), Nuremberg, 2016

Lücke, S.; Koupeny, J.; Mertens, A.  (2016): Induction Machine Speed Tracking Based on Rotor Slot Harmonics Using a Modified PLL Approach , 18th European Conference on Power Electronics and Applications (EPE'16 ECCE EUROPE), Karlsruhe, Germany, 5.-9. September 2016

Mertens, A.; Steinbrink, J. (2016): Generator-Umrichter-Prüfstand zur Untersuchung elektrischer Energiewandler in Antriebssträngen, ETG Mitgliederinformationen 2/2016, pp. 4-5

Misir, O.; Görsdorf, J.; Ponick, B. (2016): Determination of the Inductances of a Salient Pole Synchronous Machine Based on the Voltage Equation of a Single Damper Loop, 23rd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Capri, Italy, 22.-24. June, pp. 470-475

Misir, O.; Potoniec, A.; Ponick, B.  (2016): Calculation of the Damper Winding Inductances of a Synchronous Machine, The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), Glasgow, Scotland

Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R., Ponick, B. (2016): Calculation Method of Three-Phase Induction Machines equipped with Combined Star-Delta Windings, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, pp. 168-174

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Dependency of the Lifetime Estimation of Power Modules in Fully Rated Wind Turbine Converters on the Modelling Depth of the Overall System, 18th European Conference on Power Electronics and Applications (EPE'16-ECCE Europe), Karlsruhe, Germany, 5.-9. September 2016

Morisse,M.; Bartschat, A.; Wenske, J. ; Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor Frequencies, TORQUE 2016, München, Germany, 5.-7. Oktober 2016

Movagharnejad, H.; Mertens, A. (2016): Design Optimization of Various Contactless Power Transformer Topologies for Wireless Charging of Electric Vehicles, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September

Müller-Deile, F.; Heseding, H.; Ponick, B.; Mertens, A. (2016): Bezahlbare elektrische Reichweite durch Modularität,Deutsches Ingenieurblatt 5-2016, pp. 54-60

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift Systems, International Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles & International Transportation Electrification Conference, Toulouse, Frankreich, 02.-04. November 2016

Oelkers, F., Weber, B., Mertens, A.  (2016): Oversampling Based Approach for Open Circuit Fault Detection in PMSM Drive Systems, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 5.-9. September 2016

Quattrone, F.; Ponick, B. (2016): Evaluation of a Permanent Magnet Synchronous Machine with a Rotor Coil for Improved Self-Sensing Performance at Low Speed, XXIIth International Conference on Electrical Machines (ICEM 2016), Lausanne, Switzerland, 4-7 September, 2016

Tappe, S.; Dörbaum, M.; Kotlarski, T.; Ponick, B.; Ortmaier, T. (2016): Kinematics and Dynamics Identification of a Hyper-Redundant, Electromagnetically Actuated Manipulator, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Banff, Alberta, Canada, 12-15 July 2016

Ullrich, B.; Mertens, A. (2016): Temperature estimation for wire bondings in power semiconductor devices, European Conference on Power Electronics and Applications (EPE’2016 ECCE-Europe), Karlsruhe, Germany, 05.-09. September 2016

von Hofen, M.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2016): Hybrid offshore HVDC converter with diode rectifier and Modular Multilevel Converter, 2016 IEEE 7th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Vancouver, BC, 2016, pp. 1-7.

Zulk, S.; Köneke, T.; Mertens, A. (2016): Analytical Modeling of Plate Fin Heat Sinks for Natural Convection Cooling in Power Electronics, IEEE 13th Vehicle Power and Propulsion Conference (VPPC), Hangzhou, China, 17-.-20. Oktober 2016

Dietz, R., Mertens, A.  (2015): Extended Power Control for Distributed Generation Units, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-9

Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T. ; Mertens, A.; Ponick, B.  (2015): Simulation and Measurement on a Novel Electromagnetic Tilting Actuator, VDI Mechatroniktagung 2015, Dortmund, Germany, 12.-13. März 2015

Dörbaum, M.; Weber, S.; Strempel, J.; Winkel, T.; Mertens, A.; Ponick, B. (2015): Comparison of two alternative power supply strategies for an electromagnetic tilting actuator, Innovative Small Drives and Micro-Motor Systems (IKMT), 10. ETG/GMM-Fachtagung, Koeln, Germany, 14.-15. September 2015, pp. 71-76

Dück, P.; Jürgens, J.; Ponick, B.  (2015): Calculation of Synchronous Reluctance Machines Used as Traction Drives, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-5

Guseva, A.; Hoffmann, M.; Unger, A.; Zulk, S.; Amien, M.; Sarradj, E.; Kupnik, M. (2015): Ultrasonic Transducer Characterization in Air Based on an Indirect Acoustic Radiation Pressure Measurement, IEEE International Ultrasonic Symposium (IUS), Taipei, Taiwan, 21.-24. Oktober 2015, pp. 1-4

Jürgens, J.; Winter, O.; Fricassè, A.; Ponick, B.  (2015): Influences of Iron Loss Coefficients Estimation on the Prediction of Iron Losses for Variable Speed Motors, IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Jürgens, J; Ponick, B.  (2015): Eignung von synchronen Reluktanzmaschinen und permanenterregten Synchronmaschinen ohne Seltenerdmagnete als Fahrzeugantriebe, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015

Kaczorowski, D.; Michalak, B.; Mertens, A.  (2015): A Novel Thermal Management Algorithm for Improved Lifetime and Overload Capabilities of Traction Converters, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Karwatzki, D.; Baruschka, L.; Kucka, J.; Mertens, A. (2015): Current Control and Branch Energy Balancing of the Modular Multilevel Converter, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 6360-6367

Karwatzki, D.; Baruschka, L.; Mertens, A.  (2015): Survey on the Hexverter topology — A modular multilevel AC/AC converter, 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp.1075-1082

Koupeny, J.; Lücke, S.; Mertens, A.  (2015): Observer-Based Online Parameter Estimation of Squirrel-Cage Induction Machines Based on the Gradient Descent Method, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Koupeny, J.; Siebrecht, M.; Lücke, S.; Mertens, A.  (2015): Observer-Based Online Parameter Estimation of Doubly Fed Induction Generators Based on the Gradient Descent Method, International ETG Congress 2015 - die Energiewende, Bonn, Germany, 17.-18. November 2015

Krone, T.; Xu, C.; Mertens, A. (2015): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 2715-2722

Krupp, H., Mertens, A. (2015): Rotary Transformer Design for Brushless Electrically Excited Synchronous Machines, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Kucka, J.; Karwatzki, D.; Baruschka, L.; Mertens, A. (2015): Improved Modular Multilevel Converter Topology with Magnetically Coupled Branch Inductors, IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, Kanada, 20.-24, September 2015, pp. 3593-3600

Kucka, J.; Karwatzki, D.; Mertens, A. (2015): Optimised Operating Range of Modular Multilevel Converters for AC/AC Conversion with Failed Modules, European Conference on Power Electronics and Applications (EPE’2015 ECCE-Europe), Geneva, Switzerland

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Salient-Pole Synchronous Machine without Damper Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 10th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED), Guarda, Portugal, pp. 117-123

Misir, O.; Ponick, B. (2015): Determination of the Inductances of a Synchronous Machine with Unsymmetrical Stator Winding Based on the Voltage Equation of a Single Coil in the Stator Winding, 18th International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, International Conference on Electrical Drives and Power Electronics (EDPE), Tatranska Lomnica, Slovakia, pp. 306-311

Oelkers, F.; Krone, T.; Rosen, A.; Mertens, A.  (2015): Implementation and Test of a Fault-Tolerant Wheel Hub Drive System for an Electric Vehicle, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

Oelkers, F.; Rosen, A.; Mertens, A. (2015): Model-based Approach for Sensor Fault-tolerant Drive Systems, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-10

Quattrone, F.; Ponick, B.  (2015): Active Differential Inductance Control of Permanent Magnet, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-7

Quattrone, Francesco; Ponick, Bernd; Fricke, Torben (2015): Influence of punch edges on the self-sensing capabilities of permanent magnet synchronous machines with different rotor topologies, Electric Drives Production Conference (EDPC), Nuremberg, Germany, 15.-16. September 2015, pp.1-4

Rosen, A,; Groninger, M.; Mertens, A.  (2015): Modeling and optimized control of fault-tolerant H-bridge fed multiphase drives, 17th European Conference on Power Electronics and Applications (EPE'15 ECCE EUROPE), Geneva, Switzerland, 8.-10. September 2015, pp. 1-6

Stübig, C.; Seibel, A.; Schleicher, K.; Haberjan, L.; Kloepzig, M.; Ponick, B. (2015): Electromagnetic Design of a 10 MW Permanent Magnet Synchronous Generator for Wind Turbine Application, IEEE International Electrical Machines and Drives Conference (IEMDC), Coeur d’Alène (ID), USA, 10.-13. Mai 2015

Tappe, S.; Dörbaum, M.; Mertens, A.; Ponick, B.; Kotlarski, J.; Ortmaier, T. (2015): The Kinematic Synthesis of a Spatial, Hyper-Redundant System based on Binary Electromagnetic Actuators, 6th International Conference on Automation, Robotics and Applications (ICARA 2015), Queenstown, New Zealand,17.-19. Februar 2015, pp. 211-216

Weber, B.; Wiedmann, K.; Mertens, A.  (2015): Increased Signal-to-noise Ratio of sensorless control using current oversampling, 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), Seoul, Korea, 1.-5. Juni 2015, pp. 1129-1134

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Dynamic Behavior of the Doublegenerator System for Hydraulic Power Plants, Power Electronics for Distributed Generation Systems (PEDG), 2015 IEEE 6th International Symposium on, Aachen, Germany, 22.-25. Juni 2015, pp. 1-7

Zhang, M.; Fraeger, C.; Mertens, A. (2015): Control and Modeling of a Novel Speed Variable Generator System for Hydroelectric Power Plants, International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe), Nürnberg, Germany, pp. 1-10

Zulk, S.; Mertens, A.  (2015): Characterization of Dead Time Effects for Common-Mode-Reducing Modulation Methods, IEEE Vehicle Power and Propulsion Conference (VPPC 2015), Montreal, Kanada, 19.-22. Oktober 2015, pp. 1-6

C. Sommer, A. Merkert, A. Mertens (2014): A New Control Method for Minimizing the DC-Link Capacitor Current of HEV Inverter Systems, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp.1188-1193

D. Karwatzki, L. Baruschka, J. Kucka, M. von Hofen, A. Mertens (2014): Improved Hexverter Topology with Magnetically Coupled Branch Inductors, EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Optimised Operation Mode for the Hexverter Topology Based on Adjacent Compensating Power, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5399-5406

D. Karwatzki, L. Baruschka, M. von Hofen, A. Mertens (2014): Branch Energy Control for the Modular Multilevel Converter Hexverter, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp.1613-1622

D. Karwatzki, M. von Hofen, L. Baruschka, A. Mertens (2014): Operation of Modular Multilevel Matrix Converters with Failed Branches, 40th Annual Conference of IEEE Industrial Electronics Society (IECON 2014), Dallas, TX, USA, pp. 1650-1656

Emmrich, K.  (2014): Energieeffizienz - im System ggf. ganz anders, als es die Komponente verspricht, 13. Technischer Tag der VEM-Gruppe, Wernigerode, Germany, 30. September 2014

F. Boseniuk and B. Ponick (2014): Parameterization of transient thermal models for permanent magnet synchronous machines exclusively based on measurements, Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2014 International Symposium on. IEEE, pp. 295-301

F. Fuchs and A. Mertens (2014): Prediction and Avoidance of Grid-Connected Converter's Instability caused by Wind Park Typical, Load-Varying Grid Resonance, Energy Conversion Congress and Exposition (ECCE), IEEE 14-18 Sept., Pittsburgh, PA, USA, pp. 2633-2640

F. Fuchs, R. Dietz, S. Garske, T. Breithaupt, A. Mertens, L. Hofmann (2014): Challenges of grid integration of distributed generation in the interdisciplinary research project Smart Nord, IEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), pp. 1-7

Groninger, M.; Horch, F.; Kock, A,; Jakob, M.; Ponick, B (2014): Cast Coils for Electrical Machines and their Application in Automotive and Industrial Drive Systems, 4th International Electric Drives Production Conference (EDPC 2014), Nürnberg, Germany, 30. September - 1. October, pp. 1-7

J. Jürgens, A. Brune, B. Ponick (2014): Electromagnetic design and analysis of a salient-pole synchronous machine with tooth-coil windings for use as a wheel hub motor in an electric vehicle, XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 744-750

John, M.; Mendoza-Araya, P.A.; Venkataramanan, G. (2014): Small signal impedance measurement in droop controlled AC microgrids, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 702-709

K. Emmrich, A. Brune, B. Ponick  (2014): Evaluation of an analytical, efficiency-optimized torque-speed characteristic of induction machines coupled with a thermal-electromagnetic energy consumption calculation, XXIth International Conference on Electrical Machines (ICEM), Berlin, pp. 762-767

Kock, A.; Gröninger, M.; Mertens, A. (2014): Modeling and Optimized Control of Fault-tolerant Drive Topologies for Electric Vehicle Applications, XXIst International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 2372-2379

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2014): Universelles Werkzeug zur Steigerung der Energieeffizinz von technischen Prozessen am Beispiel eines Prozesskühlsystems mit elektrischer Antriebstechnik, SIMPEP-Kongress Koblenz, 17.-19. September 2014

Koupeny, J.; Mertens, A.  (2014): Offline and Online Parameter Estimation of Controlled Electric Drives, Symposium with the Institute of Thermomechanics of the Academy of Sciences, Prague, Czech Republic, Sept. 2014

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): A New Modular Multilevel AC/DC Converter Topology Applied to a Modular Multilevel DC/DC Converter, EPE European Conference on Power Electronics and Applications, (EPE 2014), Lapeenranta, Finnland, pp. 1-10

L. Baruschka, D. Karwatzki, M. von Hofen, A. Mertens (2014): Low-speed Drive Operation of the Modular Multilevel Converter Hexverter Down to Zero Frequency, Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh, PA, USA, pp. 5407-5414

M. Wehner and B. Ponick (2014): Search coil systems for early fault detection in wind turbine generators, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Ischia, Italy, 18.-20. Juni 2014, pp. 273-278

Misir O.; Ponick B. (2014): Analysis of Three-Phase Induction Machines with Combined Star-Delta Windings, IEEE 23rd International Symposium on Industrial Electronics (ISIE), Istanbul, Turkey, 1.-4. Juni 2014, pp. 756-761

O. Korolova, P. Dück, A. Brune, J. Jürgens, B. Ponick (2014): Prediction of Efficiency-optimized Salient-pole Synchronous Machines’ Operating Range Using a Coupled Numerical-Analytical Method, XXIth International Conference on Electrical Machines (ICEM), Berlin, Germany, 2.-5. September 2014, pp. 871-876

T. Krone, T. Koneke, A. Mertens (2014): System design for junction temperatures up to 200°C, 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), Lappeenranta, Finland, 26.-28. August 2014, pp. 2238-2245

Weber, S.; Merkert, A.; Mertens, A.  (2014): Gate driver for safe operation of depletion mode SiC JFETs, IEEE Energy Conversion Congress and Exposition (ECCE 2014), Pittsburgh (PA), USA, 14.-18. September 2014, pp. 5716-5722

Braunisch, D.; Ponick, B; Bramerdorfer, G. (2013): Combined Analytical-Numerical Noise Calculation of Electrical Machines Considering Nonsinusoidal Mode Shapes, IEEE Transactions on Magnetics, Vol. 49 , Issue 4, pp. 1407 - 1415

Dörbaum, M.; Juris, P.; Stübig, C.; Ponick, B. (2013): Design of High-Speed Motors with a High Power Range for Use in Future Aircrafts, PCIM Europe 2013, Nuremberg, Germany, pp. 89-96

Dück, P.; Ponick, B. (2013): Einfluss unterschiedlicher Regelungsstrategien auf das Betriebsverhalten und den Wirkungsgrad von permanentmagneterregten Synchronmaschinen, ETG Kongress, Berlin, Deutschland

Emmrich, J.; Ponick, B.; Bickel, W.; Denkena, B. (2013): Analysis of an integrated electromagnetic actuator prototype, Innovative Klein- und Mikroantriebstechnik (GMM-FB 76), Nürnberg

Fuchs, F.; Pham, D.V.; Mertens, A (2013): Einfluss der Netzimpedanz auf die Dynamik der netzseitigen Stromregelung am Beispiel einer Windenergieanlage, ETG Kongress, Berlin

Fuchs, F; Pham, D.V.; Mertens, A. (2013): Analysis of Grid Current Control in Consideration of Voltage Feedforward and Cable Capacitance Demonstrated on a Fully Sized Wind Turbine Installed in a Wind Park, IEEE Energy Conversion Congress & Expo, Denver, Colorado, USA

Hofen, M. v.; Baruschka, L.; Karwatzki, D.; Mertens, A. (2013): Comparison of Modular Multilevel Converters for the Grid Connection of Large-Scale Wind Turbines, Wind Integration Workshop, London

Karimi, R.; Koeneke T.; Kaczorowski, D.; Werner, T.; Mertens, A. (2013): Low Voltage and High Power DC-AC Inverter Topologies for Electric Vehicles, ECCE 2013, Denver, Colorado, USA

Koupeny, J.; Bresemann, D.; Orsini, C.; Mertens, A.; Ponick, B.; Seume, J. (2013): Steigerung der Energieeffizienz durch intelligente Nutzung elektrischer Antriebssysteme, ETG Kongress, Berlin

Meyer, R.; Zlotnik, A.; Mertens, A. (2013): Fault Ride Through Control of Medium-Voltage Converters with LCL Filter in Distributed Generation Systems, IEEE Energy Conversion Congress and Exposition (ECCE), Denver, CO, United States

P. Juris, A. Brune, S. Tegeler, B. Ponick (2013): Einfluss der Magnetmaterialien auf die Energieeffizienz elektrischer Fahrzeugantriebe für verschiedene Fahrzyklen, ETG Kongress, Berlin

Tegeler, S.; Ponick, B. (2013): Einfluss der Schrägung auf die Ummagnetisierungsverluste bei Drehfeldmaschinen, ETG Kongress

Teichel, S.; Dörbaum M.; Ponick, B.; Seume, J. (2013): Compact Dynamic Compressors for Active Flow Control in Autonomous High Lift Configurations, SFB 880 - Fundamentals of high-lift for future commercial aircraft, Biennial Report - Forschungsbericht 2013-03, TU Braunschweig, pp. 122-134

Wöhrmann, M.; Dörbaum, M.; Ponick, B.; Mertens, A. (2013): Design of a Fully Actuated Electromagnetic Bending Actuator for Endoscopic Applications, 9. GMM/ETG-Fachtagung Innovative Small Drives and Micro-Motor Systems (IKMT), Nuremberg, pp. 152-157

A. Brune, P. Dück, A. Kock, M. Gröninger and B. Ponick (2012): Evaluation of an Efficiency-optimized Calculation of PM Synchronous Machines’ Operating Range Using Time-saving Numerical and Analytical Coupling, Vehicle Power and Propulsion Conference (VPPC), Seoul, Südkorea

Fuchs, F.; Mertens, A. (2012): Dynamic modeling of a 2 MW wind turbine for converter issues : part 1, Power Electronics and Motion Control (EPE PEMC 2011 ECCE Europe), Proceedings of the 2012-15th International Conference and Expositon on, Novi Sad, Serbia

Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick (2012): Design of an Integrated Electromagnetic Actuator for High Frequency Damping Forces, XXth International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Kriese, M.; Wittek, E.; Gattermann, S.; Tischmacher, H.; Poll, G.; Ponick, B. (2012): Influence of bearing currents on the bearing lifetime for converter driven machines, XXth International Conference on Electrical Machines (ICEM), pp. 1735-1739

Merkert, A.; Krone, T.; Mertens, A. (2012): Characterization and Scalable Modelling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices, IEEE Vehicle Power and Propulsion Conference (VPPC 2012), Seoul, Korea

Meyer, R.; Mertens, A. (2012): Design and Optimization of LCL Filters for Grid-Connected Converters, 15th International Power Electronics and Motion Control Conference (EPE-PEMC ECCE Europe), Novi Sad, Serbia

Meyer, R.; Mertens, A. (2012): Design of LCL Filters in Consideration of Parameter Variations for Grid-Connected Converters, IEEE Energy Conversion Congress & Exposition (ECCE), Raleigh, NC, USA

P. Juris, A. Brune and B. Ponick (2012): A Coupled Thermal-Electromagnetic Energy Consumption Calculation for an Electric Vehicle with Wheel Hub Drive Considering Different Driving Cycles, Vehicle Power and Propulsion Conference (VPPC)

Quattrone, F.; Lorenz, R.D (2012): Dynamic modeling of losses in electrical machines for active loss control, Energy Conversion Congress and Exposition (ECCE), pp.47-52

Sonnenschein, M.; Appelrath, H.-J.; Hofmann, L.; Kurrat, M.; Lehnhoff, S.; Mayer, C.; Mertens, A.; Uslar, M.; Nieße, A.; Tröschel, M. (2012): Dezentrale und selbstorganisierte Koordination in Smart Grids , VDE-Kongress 2012 Smart Grid Intelligente Energieversorgung der Zukunft

Stuebig, C.; Ponick, B. (2012): Practical Experiment for Students: Winding an Induction Machine, 20th International Conference on Electrical Machines (ICEM), Marseille, Frankreich

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines for the Entire Speed Range with Reduced Computational Effort based on a Novel MRAS Approach, Power Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on

Wiedmann, K; Mertens, A (2012): Novel MRAS Approach for Online Identification of Key Parameters for Self-Sensing Control of PM Synchronous Machines, 15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe

Wiedmann, K; Mertens, A (2012): Self-Sensing Control of PM Synchronous Machines Including Online System Identification Based on a Novel MRAS Approach, 3rd IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2012), Milwaukee, WI

Wittek, E.; Kriese, M.; Tischmacher, H.; Gattermann, S.; Ponick, B.; Poll, G. (2012): Capacitance of bearings for electric motors at variable mechanical loads, XXth International Conference on Electrical Machines (ICEM), pp. 1602-1607

Al Nahlaoui, Braunisch, Eichinger, Kulig, Ponick (2011): Calculation Methods for Electromagnetically Exited Noise in Induction Motors, EDPC2011

Baruschka, L.: Mertens, A. (2011): A New 3-Phase Direct Modular Multilevel Converter, EPE European Conference on Power Electronics and Applications, (EPE 2011), Birmingham, UK, 2011

Baruschka, L.; Mertens, A. (2011): Untersuchung Modularer Multilevel-Topologien zur Netzanbindung von Batteriespeichern, ETG-Kongress 2011, Würzburg

Baruschka, L.; Mertens, A. (2011): A New 3-Phase AC/AC Modular Multilevel Converter with Six Branches in Hexagonal Configuration, IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA

Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge and Modular Multilevel Converters for BESS Application, IEEE Energy Conversion Congress and Exposition (ECCE 2011), Phoenix, AZ, USA

Baruschka, L.; Mertens, A. (2011): Comparison of Cascaded H-Bridge Converters and Modular Multilevel Converters for the use in Medium Voltage Grid Connected Battery Energy Storage Systems, The 21st International Conference and Exhibition on Electricity Distribution (CIRED 2011), Frankfurt/Main

Brune, E.; Stübig, C.; Tegeler, S.; Wehner, M.; Ponick, B. (2011): Kopplung numerischer und analytischer Verfahren zur Berechnung von permanenterregten Synchronmaschinen mit Anlaufkäfig, ETG Würzburg

Dang, L.; Kuhn, H.; Mertens, A. (2011): Digital Adaptive Driving Strategies for High-Voltage IGBTs, IEEE Energy Conversion Congress and Exposition, (ECCE 2011), Phoenix, AZ, USA

Fuchs,F.; Mertens, A. (2011): Steady State Lifetime Estimation of the Power Semiconductors in the Rotor Side Converter of a 2 MW DFIG Wind Turbine via Power Cycling Capability Analysis, 14th European Conference on Power Electronics and Applications 2011, EPE 2011, September 2011, Birmingham, United Kingdom

Gröninger, M., Horch, F., Kock, A., Pleteit, H., Ponick, B., Schmidt, D., Wöstmann, F.-J. (2011): Casting Production of Coils for electrical Machines, Electric Drives Production Conference Nürnberg

Jae Suk Lee; Wei Xu; Hurst, Z.; Bradley, B.; Quattrone, F.; Lorenz, R.D. (2011): Time optimal torque control and loss minimization in AC machines using deadbeat direct torque and flux control, Electrical Machines and Systems (ICEMS), pp.1-6

Janssen, G., Wiedmann, K., M. v. Hofen, Mertens, A., Ponick, B. (2011): Entwicklung von Antriebssystemen basierend auf elektromagnetische Mikromotoren, Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11.-12. Oktober 2011 in Karlsruhe

Jastrzembski, Ponick (2011): Design of a Conveyor Directly Driven by a Hybrid Linear Motor following FEM and Reluctance Network Approach, LDIA 2011, Eindhoven (Holland)

Köneke T., Mertens A., Domes D., Kanschat P (2011): Highly Efficient 12kVA Inverter with Natural Convection Cooling Using SiC Switches, PCIM Europe 2011, Nuremberg, Germany

Meyer, R.; Mertens, A. (2011): Auslegung eines LCL Filters für Umrichter mit niedriger Schaltfrequenz in dezentralen Erzeugungsanlagen, ETG Kongress 2011, Würzburg

Radosavac, Froböse, Overmeyer, Jastrzembski, Ponick (2011): Lineardirektantrieb für Transportbänder, WGTL Kolloqium 2011, Hannover

Averberg, A.; Tran, H. N. ; Nguyen, C. Q. ; Mertens A. (2010): Two-Stage Interleaved Power Conditioner for Connecting a 5 kW el. SOFC with a 750 V DC Link , The 2010 International Power Electronics Conference - ECCE Asia (IPEC 2010), Sapporo, Japan

Brune A., Dempewolf K.-H., Ponick B. (2010): Modelling and FE Parameter Identification of Permanent Magnet Synchronous Machines in Consideration of Spatial Harmonics, XIX International Conference on Electrical Machines ICEM 2010, Rom

E. Wittek, M. Kriese, H. Tischmacher, S. Gattermann, B. Ponick, G. Poll (2010): Capacitances and lubricant film thicknesses of motor bearings under different operating conditions , ICEM 2010 (Rom)

Janssen, G., Waldschik, A., Büttgenbach, S., Ponick, B. (2010): Entwurf und Simulation eines rotatorischen Mikroreluktanzschrittmotors, Innovative Klein- und Mikroantriebstechnik, 124, 8.ETG/GMM-Fachtagung am 23. September in Würzburg, VDE Verlag GmbH Berlin, ISBN 978-3-8007-3301-9, 2010, S.93-98

Jastrzembski, Ponick (2010): Different Methods for Reducing Detent Force in a Permanent Magnet Linear Synchronous Motor, IECON 2010, Phoenix, Arizona (USA)

Köneke, T.; Merkert, A.; Mertens, A.  (2010): System based optimization of the chip size and the thermal path for Si and SiC semiconductors , 6th International Conference on Integrated Power Electronic Systems, Nürnberg

Kriese, Wittek, Tischmacher, Gattermann (2010): Prediction of Motor Bearing Currents for Converter Operation, ICEM 2010, Rome (Italy)

R. Helmer, P. Dück, B. Ponick  (2010): Determination of Transient Reactances of Salient Pole Synchronous Machines with Analytical and Numerical Methods. , Speedam 2010, Pisa, Italy

Rüger, Schnick, Mertens, Mathis (2010): Novel PWM Modulation Strategy for 3-phase Inverters with Reduced Distortion at Low Switching Frequency, IECON 2010, Phoenix, Arizona (USA)

Stübig, C. ; Ponick, B. (2010): Berechnung von Hybridschrittmotoren, 8. ETG/GMM-Fachtagung Innovative Klein- und Mikroantriebstechnik, Würzburg, 23. September 2010

Tischmacher, Gattermann, Kriese, Wittek  (2010): Bearing Wear Caused by Converter-Induced Bearing Currents , IECON 2010, Phoenix, Arizona (USA)

Averberg, A.; Meyer, K.R.; Mertens, A. (2009): Design Considerations of a Current-fed DC-DC Converter with High Voltage Gain for Fuel Cell Applications,, EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009

Froböse, Jastrzembski, Overmeyer, Ponick (2009): Modellierung eines Lineardirektantriebes für Transportbänder, WGTL-Kolloqium 2009, Illmenau

Jastrzembski, Froböse, Ponick, Overmeyer (2009): Direktantrieb eines Förderbandes durch einen permanentmagnet erregten Synchron-Linear-Motor, ETG-Kongress 2009, Düsseldorf

Jastrzembski, Ponick (2009): Design of a Novel Direct Driven Conveyor by a Linear Synchronous Motor, IECON 2009, Porto, Portugal

Kuhn, H.; Mertens, A. (2009): On-line Junction Temperature Measurement of IGBTs based on Temperature Sensitive Electrical Parameters,, EPE 13th European Conference on Power Elektronics and Applications (EPE2009), Barcelona, Spain, 08.-10.09.2009

Ponick, B (2009): Miniaturisation of Electrical Machines, ISTET'09, Lübeck, pp. 1-4

Ponick, B.; Jastrzembski, J.-P. (2009): Neuartiger Linear-Direktantrieb für Transportbänder,, 8. Technischer Tag der VEM-Gruppe, Wernigerode

Tegeler, S.; Helmer, R.; Ponick, B. (2009): Saturation Behaviour of Doubly-fed Induction Generators, , European Wind Energy Conference & Exhibition 2009, Parc Chanot, Marseille, France 16 – 19 March 2009

Waldschik, A.; Feldmann, M.; Wiedmann, K.; Janssen, G.; Ponick, B.; Mertens, A.; Büttgenbach, S. (2009): Funktionelle Komponenten für einen linearen Reluktanzschrittmotor,, Mikrosystemtechnik-Kongress 2009, Berlin, 2009

Wiedmann, K.; Wallrapp, F.; Mertens, A. (2009): Analysis of Inverter Nonlinearity Effects on Sensorless Control for Permanent Magnet Machine Drives based on High-Frequency Signal Injection,, EPE European Conference on Power Electronics and Applications (EPE 2009), Barcelona, Spain, 2009

Averberg, A.; Mertens, A. (2008): Characteristics of the Single Active Bridge Converter with Voltage Doubler

Averberg, A.; Meyer, K.R.; Mertens, A. (2008): Current-fed Full Bridge Converter for Fuel Cell Systems

Averberg, A.; Meyer, K.R.; Nguyen, C.Q., Mertens, A.  (2008): A Survey of Converter Topologies for Fuel Cells in the kW Range

Garbe, E.; Helmer, R.; Ponick, B. (2008): Modelling and fast calculating the characteristics of synchronous machines with the finite element method

Helmer, R.; Wang, D.; Ponick, B. (2008): Investigation of Part Winding Start Used in Cage Induction Motors

Janssen, G., Traisigkhachol, O., Gatzen, H.H., Ponick, M.: (2008): Design and Fabrication of a Rotary Micro Synchronous Motor, Proc. Actuator 2008, Bremen, Germany, pp. 457-460

Kuhn, H.; Köneke, T.; Mertens, A. (2008): Considerations for a Digital Gate Unit in High Power Applications

Kuhn, H.; Koneke, T.; Mertens, A. (2008): Potential of digital gate units in high power applications , IEEE Power Electronics and Motion Control Conference (EPE-PEMC 2008), Poznan, Poland, 2008, page(s): 1458-1464

Laczynski, T.; Mertens, A. (2008): Predictive stator current control for three-level voltage-source inverters with output LC-filters;, EPE-PEMC 2008, Poznan, Polen, Page(s):569-575

Laczynski, T.; Werner, T.; Mertens, A. (2008): Active Damping of LC-Filters for High Power Drives using Synchronous Optimal Pulsewidth Modulation

Laczynski, T.; Werner, T.; Mertens, A. (2008): Energy-based modulation error control for high-power drives with output LC-filters and synchronous optimal pulse width modulation

Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulationsfehlerregelung für Mittelspannungsantriebe mit LC-Filtern und offline optimierter Pulsdauermodulation

Laczynski, T.; Werner, T.; Mertens, A. (2008): Modulation Error Control for Medium Voltage Drives with LC-Filters and Synchronous Optimal Pulse Width Modulation, IAS 2008, Edmonton, Kanada, Page(s): 1-7

Rüger, N.E.; Schnick, O.; Mathis, W.; Mertens, A. (2008): New Modulation Strategy with Low Switching Frequency and Minimum Baseband Distortion

Schnick, O. ; Rüger, N. E. ; Mertens, A. ; Mathis, W. (2008): New Modulation Strategy for Controlled Power Electronic Applications with Low Switching Frequencies

Stuebig, C.; Ponick, B. (2008): Determination of Air Gap Permeances of Hybrid Stepping Motors for Calculation of Motor Behaviour 18th International Conference on Electrical Machines (ICEM), Vilamoura, Portugal, 06.-09.09.2008

Averberg, A.; Mertens, A. (2007): Analysis of a Voltage-fed Full Bridge DC-DC Converter in Fuel Cell Systems

Averberg, A.; Mertens, A. (2007): Design Considerations of a Voltage-fed Full Bridge DC-DC Converter with High Voltage Gain for Fuel Cell Applications

Demmig, S.; Gehrking R.; Wiedmann, K.; Ponick, B.; Mertens A. (2007): Positionsregelung eines elektromagnetischen Mikrolinearmotors

Demmig, S.; Gehrking, R.; Wiedmann, K.; Mertens, A.; Ponick, B. (2007): Design and Control of a Micro Linear Motor with Integrated Magnetic Guidance

Dempewolf, K.-H.; Getschmann, T.; Rüger, N.E.; Ganesan, V.A.; Mertens, A.; Ponick, B. (2007): Transiente Simulation eines Antriebssystems zur Bestimmung der frequenzabhängigen Verluste in schnelllaufenden permanentmagneterregten Synchronmaschinen

Dempewolf, K.-H.; Ponick, B. (2007): Modelling of Permanent Magnet Synchronous Machines for Simulations of Transient Phenomena

Gehrking R.; Demmig S.; Feldmann M.; Waldschi A.; Büttgenbach S.; Ponick B. (2007): Charakterisierung eines elektromagnetischen Mikrolinearmotors mit integrierter magnetischer Führung

Gehrking, R.; Demmig, S.; Mertens, A.; Ponick, B. (2007): Investigations on a Micro Linear Stepping Motor Supplied by a DC-DC Converter

Kuhn, H.; Rüger, N.E.; Mertens, A. (2007): Control Strategy for Multilevel Inverter with Non-ideal DC Sources

Laczynski, T.; Mertens, A. (2007): New Current Controller for Inverter Fed Medium Voltage Drives with LC Filter

Laczynski, T.; Mertens, A. (2007): Predictive Current Controller for Inverter Fed Medium Voltage Drives with LC Filter, PEDS 2007, Bangkok, Thailand, Page(s): 1496-1501

Rüger, N.E.; Kuhn, H.; Mertens, A. (2007): Harmonic Distortion of Multicarrier PWM Strategies in Cascaded Multilevel Converters with Unequal DC Sources

Wiedmann, K; Demmig, S.; Mertens, A. (2007): Modified Sliding Mode Controller for Positioning of Micro Linear Motors

Demmig, S.; Gehrking, R.; Feldmann, M.; Büttgenbach, S.; Ponick, B. (2006): Specific Design Rules for Micro Linear Motors

Gatzen, H.H.; Hahn, M.; Bedenbecker, M.; Ponick, B.; Gehrking, R.; Demmig, S. (2006): Advances in the Development of a Linear Hybrid Micro Actuator

Gehrking, R.; Demmig, S.; Ponick, B.; Feldmann, M.; Büttgenbach, S. (2006): A Micro Linear Motor with Integrated Passive Magnetic Guidance

Pöhler, S.; Mertens, A.; Sommer, R. (2006): Optimisation of Output Filters for Inverter Fed Drives

Ruffert C.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2006): Magnetic Levitation Assisted Guide for a Linear Microactuator

Demmig, S.; Gehrking, R.; Mertens, A.; Ponick, B. (2005): Simulation of the magnetic and dynamical characteristics of micro linear motors

Gehrking, R.; Ruffert, C.; Demmig, S.; Gatzen, H.H.; Ponick, B. (2005): Entwicklung einer magnetischen Führung für Mikroaktoren

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Auslegung aktiver Mikrosysteme

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design of active micro systems

Mertens, A.; Ganesan, V. (2005): Three-Phase Sigma-Delta Modulation using Zero-Sequencs Components

Budde, T.; Hahn, M.; Föhse, M.; Edler, J., Stölting, H.-D.; Gatzen, H.H. (2004): Design, Fabrication and Characterization of a Hybrid Linear Micro Step Motor

Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2004): Design and Simulation of essential Parts of active Microsystems

Gatzen, H.H; Stölting, H.-D.; Ponick, B. (2004): Alternatives for Micro-Machined Linear Actuators

Stölting, H-D.; Hesselbach, J.; Becker, O.; Berardinelli, A.; Rathmann S. (2004): Robuste modellbasierte Regelung von Mikro-Reluktanzmotoren

Brune, K.; Seinsch, H.O.; Steinbrink, J. (2003): Conducted emission of synchronous generators and its dependence on design features, Electrical Engineering, vol. 85, pp. 71-81

Edler, J.; Germer, C.; Hansen, U.; Kopp, D.; Li, J. (2003): Entwurf und Simulation aktiver Mikrosysteme

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2003): A Batch Fabricated Linear Synchronous Motor

Klug, R.-D.; Mertens, A. (2003): Reliability of Megawatt Drive Concepts

Seidemann, V.; Edler, J.; Büttgenbach, S.; Stölting, H.-D. (2003): Linear Variable Reluctance (VR) Micro Motor with Horizontal Flux Guidance

Altenbernd, G. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design

Altenbernd, G.; Wähner, L. (2002): Integrated Asynchronous Starter-Generator in Disk Rotor Design

Edler, J.; Föhse, M.; Gatzen, H.H.; Stölting, H.-D. (2002): Ein Antriebsteil für aktive Mikrosysteme

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Design, Fabrication, and Characterization of a Miniature Linear Induction Motor

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): Investigations on the Pole Geometry Optimization of a Variable Reluctance Microactuator

Föhse, M.; Edler, J.; Stölting, H.-D.; Gatzen, H.H. (2002): A Batch Fabricated Linear Synchronous Motor

Altenbernd, G. (2001): Kleine Asynchron-/Synchronmaschinen in der Kfz-Technik

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H. H. (2001): A Linear Microactuator with Enhanced Design

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H (2001): Elektromagnetischer Mikrolinearmotor

Jacob, A. (2001): Hybridmotor: Anwendung, Aufbau, Wirkungsweise und Berechnung

Seinsch, H.O. (2001): Methoden der Motordiagnose

Seinsch, H.O. (2001): Maßnahmen zur Unterdrückung von Lagerströmen in umrichtergespeisten Induktionsmotoren

Stölting, H.-D. (2001): Mechatronik, der Motor für Innovationen in der Klein- und Mikroantriebstechnik

Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Present Stage of Development of the Vector Controlled Crankshaft Starter-Generator for Motor-Vehicle

Altenbernd, G.; Schäfer, H.; Wähner, L. (2000): Vector Controlled Crankshaft Starter-Generator for Motor Vehicle

Gatzen, H. H.; Stölting, H.-D.; Büttgenbach, S.; Dimigen, H. (2000): A Novel Variable Reluctance Micromotor for Linear Actuation

Hausberg, V.; Seinsch, H.O. (2000): Wellenspannungen und zirkulierende Lagerströme bei umrichtergespeisten Induktionsmaschinen, Electrical Engineering, vol. 82, pp. 313-326

Hausberg, V.; Seinsch, H.O. (2000): Schutzmaßnahmen gegen Lagerschäden umrichtergespeister Motoren, Electrical Engineering, vol. 82, no. 6, pp. 339-345

Kleen, S.; Ehrfeld, W.; Michel, F.; Stölting, H.-D. (2000): Penny-Motor: A Family of Novel Ultraflat Electromagnetic Micromotors

Stölting, H.D. (2000): Small Electromagnetic Disk Drives

Journal Papers

Kucka, J.; Karwatzki D.; Baruschka, L.; Mertens, A.  (2017): Modular Multilevel Converter With Magnetically Coupled Branch Inductors, IEEE Transactions on Power Electronics , vol.32, no.9, pp. 6767-6777

Kucka, J.; Karwatzki, D.; Mertens, A. (2017): Enhancing the Reliability of Modular Multilevel Converters Using Neutral Shift, IEEE Transactions on Power Electronics, Vol. 32, No. 12, pp. 8953-8957

Misir, O.; Ponick, B. (2017): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering, Archiv für Elektrotechnik, Vol. 99, Issue 2, pp. 615-624

Misir, O.; Raziee, S. M.; Hammouche, N.; Klaus, C.; Kluge, R.; Ponick, B. (2017): Prediction of Losses and Efficiency for Three-Phase Induction Machines Equipped with Combined Star-Delta Windings, IEEE Transactions on Industry Applications, Vol. 53, No. 4, pp. 3579 - 3587, July-Aug.

Raziee, S. M.; Misir, O; Ponick, B. (2017): Winding Function Approach for Winding Analysis, IEEE Transactions on Magnetics, Vol. 53, No. 10, October

Krone, T.; Xu, C.; Mertens, A. (2016): Fast and Easily Implementable Detection Circuits for Short-Circuits of Power Semiconductors, IEEE Transactions on Industry Applications, DOI: 10.1109/TIA.2016.2618785

Mertens, A.; Kucka, J. (2016): Quasi Two-Level PWM Operation of an MMC Phase Leg With Reduced Module Capacitance, Power Electronics, IEEE Transactions on , vol.21, no.10, pp.6765-6769

Misir, O.; Ponick, B. (2016): Determination of the inductances of synchronous machines with unsymmetrical stator winding based on the voltage equation of a single coil in the stator winding, Electrical Engineering – Archiv für Elektrotechnik, Volume 98, Issue 4

Misir, O.; Dobbert, F.; Ponick, B. (2016): Analytical Method for the Air Gap Permeance Calculation of Salient Pole Synchronous Machines, e & i Elektrotechnik und Informationstechnik, Volume 133, Issue 2, pp. 103-111

Misir, O.; Raziee, S. M.; Ponick, B.  (2016): Determination of the Inductances of Salient Pole Synchronous Machines Based on the Voltage Equation of a Single Coil in the Stator Winding, IEEE Transactions on Industry Applications, Volume 52, No. 5, pp. 3792-3804

Quattrone, F.; Ponick, B. (2016): Maschinendesign für geberlos geregelte PMSM, e & i Elektrotechnik und Informationstechnik

Misir, O.; Dobbert, F.; Ponick, B. (2015): Analytisch-numerische Berechnung des magnetischen Luftspaltleitwerts für den Läufer einer Schenkelpolsynchronmaschine, e & i Elektrotechnik und Informationstechnik, Volume 132, Issue 1, pp. 33-38

Mustafa, R.; Küçükay, F.; Boseniuk, F.; Ponick, B.; Tang, T.; Köhler, J.; Ullrich, B.; Mertens, A.  (2015): Innovative Electric Vehicle Modelling for Energy Management Applications, International Journal of Vehicle Design, vol. 68, no. 4, pp. 265-284

S.H. Teichel, M. Dörbaum, O. Misir, A. Merkert, A. Mertens, J.R. Seume, B. Ponick (2015): Design considerations for the components of electrically powered active high-lift systems in civil aircraft, CEAS Aeronautical Journal, Volume 6, Number 1, pp. 49-67

A. Merkert, T. Krone, A. Mertens (2014): Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices, Power Electronics, IEEE Transactions on , vol.29, no.5, pp.2238,2245

Bostanci, E.; Neuschl, Z.; Plikat, R.; Ponick, B. (2014): No-Load Performance Analysis of Brushless DC Machines With Axially Displaceable Rotor, Industrial Electronics, IEEE Transactions on, vol. 61, Issue 4, pp. 1692-1699

Jürgens, J.; Brune, A.; Ponick, B.  (2014): Weg von teuren Permanentmagneten, Zeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (ZfAW), Heft 4/2014, pp. 49-55

M. Blank, M. Calabria, R. Dietz, F. Fuchs, T. Klingenberg, S. Lehnhoff, A. Mertens, W. Schumacher (2014): Agentenbasierte Vorhaltung und Erbringung von Primärregelleistung, Automatisierungstechnik 2014, vol. 62, no. 5, pp. 347-363

R. Meyer, A. Zlotnik, A. Mertens (2014): Fault Ride-Through Control of Medium-Voltage Converters With LCL Filter in Distributed Generation Systems, IEEE Transactions on Industry Applications, vol. 50, no. 5, 2014, pp. 3448-3456

Baruschka, L.; Mertens, A.  (2013): A New Three-Phase AC/AC Modular Multilevel Converter With Six Branches in Hexagonal Configuration , IEEE Transactions on Industry Applications, Vol. 49

Dang L.; Kuhn H.; Mertens, A. (2013): Digital Adaptive Driving Strategies for High-Voltage IGBTs, IEEE Transactions on Industry Applications, Volume 49, Nr. 4

Kampen, D.; Quattrone, F.; Ponick, B. (2013): Frequenzumrichterbedingte Lagerströme: was wirklich hilft, Antriebstechnik 09/2013

Ponick, B.; Dück, P. (2013): Energieverbrauch von elektrischen Antrieben optimieren – Schnelle, vollständig automatisierbare Simulationsrechnungen, ti Technologie Informationen, 01/2013, p. 10

A. Mertens, F. Fuchs, L. Baruschka (2012): Wandler im Meerespuls, Erneuerbare Energien, 07/2012

B. Denkena, W. Bickel, J. Emmrich, B. Ponick (2012): Entwurf eines innovativen Spindelmotors zur Erhöhung der Prozessstabilität von Frässpindeln, Zeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2012, Seite 518-521, Carl Hanser Verlag

Ganesan, V., Wiedmann, K., Janssen, G., Ponick, B., Mertens, A. (2012): Development of Drive Systems Based on Electromagnetic Microactuators, Industrial Electronics, IEEE Transactions on , vol.59, no.3, pp.1409-1417, March 2012

Stübig, C.; Ponick, B. (2012): Comparison of Calculation Methods for Hybrid Stepping Motors, Industry Applications, IEEE Transactions on , vol.48, no.6, pp.2182,2189

A. Kampker, T. Vogels, C. Nowacki, Rainer Schmidt, M. Harding, Dirk Uwe Sauer, Madeleine Ecker, B. Ponick, A. Brune, Axel Mertens, B. Ullrich (2011): E-Antrieb.Net: Development- and production environment for electric drive trains in a SME focused network (Megatrend: electro mobility), 1. WGPJahreskongress, Berlin

B. Denkena, W. Bickel, B. Ponick und J. Emmrich (2011): Dynamic analysis of a motor-integrated method for a higher milling stability, Productionn Engineering, Volume 5, Number 6, pp. 691-699

Ponick, B. (2011): Miniaturisation of electrical machines, COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 30 Iss: 4, pp.1139 - 1147

Ponick, B. (2010): Energieeffizienz - Welche Technologien bringen wirklich etwas?, eta [energie]  | file |

S.Tegeler; F. Quattrone; B. Ponick (2010): Windgeneratoren effizient berechnen - Kopplung analytischer und numerischer Berechnungsverfahren für doppelt gespeiste Asynchrongeneratoren., Antriebstechnik 11/2010

Hansen, S.; Janssen, G.; Ganesan, V.A.; Ponick, B.; Mertens, A.; Gatzen, H.H. (2009): Linearer skalierbarer Mikro-Reluktanzschrittmotor, 4. Kolloquium Mikroproduktion, BIAS Verlag Bremen

Helmer, R.; Garbe, E.; Steinbrink, J.; Ponick, B. (2009): Combined analytical-numerical calculation of electrical machines,, Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic

Laczynski,T.; Mertens,A. (2009): Predictive Stator Current Control for Medium Voltage Drives With LC Filters, IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 24, NO. 11, NOVEMBER 2009, pages (2427-2435)

Wiedmann, K.; Mertens, A. (2009): Analysis and comparison of sensorless control methods for permanent magnet machine drives at low speed,, Acta Technica, Institute of Thermomechanics AS CR, v. v. i. Dolejškova 5, 182 00 Praha 8, Czech republic

Demmig, S.; Gehrking, R.; Hahn, M.; Wiedmann, K.; Ponick, B.; Gatzen, H.-H.; Mertens, A. (2008): Technical progress in designing and controlling of active microsystems, , Volume 14, Number 12, November 2008, Springer Berlin / Heidelberg

Brune, K; Seinsch, H.O. (2006): Performance of three-phase motors after disconnecting damaged coils, Electrical Engineering, vol. 89, no. 4, pp. 271-283

Hahn, M.; Gehrking, R.; Ponick, B.; Gatzen, H.H. (2005): Design improvements for a linear hybrid step micro-actuator

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2002): Linear Microactuator with Enhanced Design

Edler, J.; Stölting, H.-D.; Föhse, M.; Gatzen, H.H. (2002): A linear microactuator with enhanced design

Edler, J.; Föhse, M.; Stölting, H.-D.; Gatzen, H.H. (2001): Elektromagnetischer Mikrolinearantrieb

Jacob, A. (2001): Magnetischer Leitwert zweiseitig genuteter Anordnung

Jacob, A.; Seinsch, H.O. (2001): Einfluß magnetischer Nutenverschlusskeile auf den magnetisch wirksamen Luftspalt und die Nutstreuung

Hausberg, V.; Seinsch, H.O. (2000): Kapazitive Lagerspannungen und -ströme bei umrichtergespeisten Induktionsmaschinen, Electrical Engineering, vol. 82, pp. 153-162

Kleen, S.; Ehrfeld, W.; Michel, F.; Nienhaus, M.; Stölting, H.-D. (2000): Ultraflache Motoren im Pfennigformat

Books

Fuchs, F. (2017): Converter Control for Wind Turbines when Operating in Weak Grids containing Resonances, Dissertation

Jung, M. (2017): Optimiertes multifunktionales bidirektionales Ladegerät für Elektrofahrzeuge, Dissertation, Fraunhofer Verlag, ISBN 978-3-8396-1193-7

Koupený, J. (2017): Online-Parameter-Identifikation von geregelten Antriebssystemen mit Umricherspeisung, Dissertation, Papierflieger Verlag GmbH, ISBN 978-3-86948-575-1

Tischmacher, H. (2017): Systemanalysen zur elektrischen Belastung von Wälzlagern bei umrichtergespeisten Elektromotoren, Dissertation

Junginger, C. (2016): Untersuchung der Stromverdrängung im Ständer hoch ausgenutzter Elektrischer Maschinen, Dissertation, Springer Verlag, AutoUni-Schriftenreihe, ISBN 978-3-658-17006-6

Tegeler, S. (2016): Erweiterung von analytischen Verfahren zur Berechnung von Ummagnetisierungsverlusten in Drehfeldmaschinen, Dissertation

Braunisch, D.  (2015): Kombinierte analytisch-numerische Berechnung der Magnetgeräusche elektrischer Maschinen, Dissertation, TIB Hannover, Univ., Diss., Online-Ress. 2015, http://edok01.tib.uni-hannover.de/edoks/e01dh15/842127003.pdf

Garbe, E.  (2015): Beeinflussung des Geräuschs von Induktionsmaschinen durch innovative Ständer- und Läufergeometrien, Dissertation, TIB Hannover, Univ., Diss., Online-Ress. 2015, http://edok01.tib.uni-hannover.de/edoks/e01dh15/831947675.pdf

Bostanci, E.  (2014): Performance Analysis of Brushless DC Machines with Axially Displaceable Rotor, Dissertation, AutoUni-Schriftenreihe, Band 64, Logos Verlag Berlin GmbH

Jastrzembski, J.-P.  (2014): Synchrone Linear-Direktantriebe für Förderbänder, Dissertation, VDI-Fortschrittsbericht Nr. 412, Reihe 21, Elektrotechnik, VDI-Verlag

Robert Meyer (2014): Fault-Ride-Through-Regelung von Windenergieanlagen mit Vollumrichter und LCL-Netzfilter, Dissertation, Leibniz Universität Hannover, TIB Hannover, Univ., Diss., Online-Ress. 2014, http://edok01.tib.uni-hannover.de/edoks/e01dh14/812759397.pdf

Baruschka, L. (2013): Untersuchung des modularen Direktumrichters "Hexverter", Dissertationsschrift, Hannover

Dempewolf, K.-H. (2013): Modellierung des dynamischen Verhaltens permanentmagneterregter Synchronmaschinen, Dissertation, VDI-Fortschrittsbericht Nr. 407, Reihe 21, Elektrotechnik, VDI-Verlag

Veeh, C. (2013): Oberwellenorientierte Wicklungsmodifikation von permanentmagneterregten Synchronmaschinen mit Zahnspulenwicklung, Dissertation, VDI-Fortschrittsbericht Nr. 408, Reihe 21, Elektrotechnik, VDI-Verlag

Cornelia Stübig (2012): Effiziente Berechnungsverfahren für Hybridschrittmotoren, Dissertation, VDI-Fortschrittsbericht Nr. 400, Reihe 21, Elektrotechnik, VDI-Verlag

Rüger, N. (2012): Zur Anwendung eines bandseparierenden Modulationsverfahrens mit niedrigen Taktzahlen in der Leistungselektronik, Dissertation, VDI-Fortschrittsbericht Nr. 402, Reihe 21, Elektrotechnik, VDI-Verlag

Wiedmann, K. (2012): Positionsgeberloser Betrieb von permanentmagneterregten Synchronmaschinen, Dissertation

Büttgenbach, S.; Burisch, A.; Hesselbach, J. (Eds.) (2011): Design and Manufacturing of Active Microsystems Series: Microtechnology and MEMS, Design and Manufacturing of Active Microsystems Series: Microtechnology and MEMS, 1st Edition

Averberg, A. (2009): Gleichspannungswandler für Brennstoffzellensysteme: Analyse, Vergleich und Bewertung unterschiedlicher Konzepte, Fortschritt-Berichte VDI, Reihe 21, Nr. 389, VDI-Verlag Düsseldorf, 2009

Müller, G.; Ponick, B. (2009): Theorie elektrischer Maschinen 6. Aufl.,, Wiley-VCH Weinheim

Stölting, H.-D., Kallenbach, E., Amrhein, W. (2008): Handbook of Fractional-Horsepower Drives, Springer-Verlag

Demmig, S.; Gehrking, R.; Ponick, B.; Mertens, A.; Wiedmann, K. (2007): Positionsregelung eines elektromagnetischen Mikrolinearaktors, GMM-Fachbericht 54: Innovative Klein- und Mikroantriebstechnik, VDE-Verlag, Berlin und Offenbach, pp. 117-122

Müller, G.; Ponick, B.; Vogt, K. (2007): Berechnung elektrischer Maschinen

Mertens, A. (2006): Innovationen und Trends der Leistungselektronik

Müller, G.; Ponick, B. (2005): Grundlagen elektrischer Maschinen

Stölting, H.-D. (2004): Electromagnetic Actuators, in: Janocha, H.: Actuators

Jäger, K.; Dittmann, F.; Stölting, H.D. (2003): Alles bewegt sich – Beiträge zur Geschichte elektrischer Antriebe

Schäfer, H.; Altenbernd, G. (2001): Welche elektrischen Maschinen sind aus heutiger Sicht als Starter-Generator für den Serieneinsatz geeignet?

Stölting, H.D.; Kallenbach, E. (2001): Handbuch Elektrische Kleinantriebe

Seinsch, H.O. (1993): Grundlagen elektrischer Maschinen und Antriebe, Teubner Verlag

Seinsch, H.O. (1992): Oberwellenerscheinungen in Drehfeldmaschinen, Teubner Verlag

Seinsch, H.O. (1991): Ausgleichsvorgänge bei elektrischen Antrieben, Teubner Verlag

Other publications

Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2017): Kompakte elektrisch angetriebene Turbokompressoren für ein aktives Hochauftriebssystem künftiger Verkehrsflugzeuge, E-MOTIVE Expertenforum Hannover, 2017

Janssen, G., Ponick, B. (2011): Kleine Motoren, große Möglichkeiten, Nano- und Quantenengineering, Unimagazin 01/02, H12467,Zeitschrift der Leibniz Universität Hannover, S.32-34

R. Helmer; K. Reichert (2008): Dimensionierung von PM-Maschinen, Allgemeines und mit FEMAG

Janssen, G. (2006): Mikroaktoren in großer Vielfalt, Jahresbericht, Institut für Antriebssysteme und Leistungselektronik, Hannover, S.10-11

Steinbrink, J. (2006): Kraftwirlungen in permanentmagneterregten Maschinen

Janssen, G., Gehrking, R.,Edler, J., Ponick, B.,Stölting, H.D. (2011): Electromagnetic Design of Microactuators, Design and Manufacturing of Active Microsystems, Springer Verlag Heidelberg Dordrecht London New York, ISBN978-3-642-12902-5, Part 1, 11-28

Harms, H.-F., Schoon, J., Janssen, G. (2006): Störspannungen an Betriebsempfangsantennenanlagen – Suche nach einer Störquelle, Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 7.-9. März 2006 in Düsseldorf, VDE Verlag GmbH, Berlin Offenbach, S.735-742